Material No.

Category

Product Name

Description

1000021550

Chemicals & Misc.

Weighting Agent

ADMIXTURE: DRILLING MUD GROUND BARITE (BARIUM SULFATE) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER FORM, BARYTES (BASO4), FOR INCREASING DRILLING FLUIDS DENSITY UP TO 157 PCF (21 LB/GAL), BARIUM SULFATE (BASO4) 90 % WT, MINIMUM SPECIFIC GRAVITY: 4.20 4.20 GM/CC, MINIMUM, BULK DELIVERY, API 13A, SECTION 2, API 13 I, SECTION 4 & 5 (MAY, 1993 OR LATEST), API 13 K, SECTION 4 (MAY, 2000 OR LATEST)

1000021551

Chemicals & Misc.

WBM Viscosifier

ADMIXTURE: DRILLING MUD GROUND NONTREATED BENTONITEADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-BASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,MULTI-WALLED BAGS, 25 KG OR 50 LB BAG,API 13A AND API 13 I (LATEST EDITION),CONTAINER TO BE PROPERLY LABELED W/VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE, BATCH NUMBER AND STOCK NUMBER. OTHER ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. PROPER TUBE SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED AND EXPERIENCED PERSONNEL. NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). KITS COMPONENTS ITM QTY DESCRIPTION 01-- PHYSICAL REQUIREMENT: A. MOISTURE: 13% WT., MAXIMUM B. DISPERSED PLASTIC VISCOSITY, CP: 10, MINIMUM C. YIELD POINT/PLASTIC VISCOSITY RATIO: 1.5, MAXIMUM D. DISPERSED FILTRATE VOLUME, API CM3: 12.5,MAXIMUM 02--PARTICLE SIZE: A. RESIDUE ON 200 MESH ASTM E11), WET: 2.5% WT. MAXIMUM B. RESIDUE ON 100 MESH (ASTM E11), DRY: 2 % WT. MAXIMUM 03--YIELD, PER SHORT TON (2000 LBS): A. BARRELS OF VISCOSITY 15 CP: 90, MINIMUM 04--METHYLENE BLUE CAPACITY,MEQ/100G: 65,MINIMUM OR EQUIVALENT TO THE API TEST CALIBRATION BENTONITE 05--CEMENT CONTAMINATION, PH AFTER

1000021552

Chemicals & Misc.

Non-Treaded Bentonite

ADMIXTURE, DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER FORM, BENTONITE SODIUM MONTMORILLONITE, FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-BASED FLUIDS, NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS, BULK DELIVERY, API 13A AND API 13 I (LATEST EDITION)

1000021556

Chemicals & Misc.

Biocide

ADMIXTURE: DRILLING MUD; 5 GALLON EPOXY PLASTIC CAN, GLUTARALDEHYDE ADMIXTURE DRILLING MUD; AQUEOUS SOLUTION FORM,GLUTARALDEHYDE,FOR A MICROBIOCIDE USED IN DRILLING FLUIDS TO CONTROL AEROBIC AND ANAEROBIC BACTERIA INCLUDING SULFATE REDUCERS,AQUEOUS SOLUTION OF GLUTARALDEHYDE,5 GAL PLASTIC CAN,CORROSIVE TO COMMON METAL, IDEAL STORAGE TEMPERATURE 80 DEG F, IN EPOXY PLASTIC CONTAINER CONTAINER PROPERLY LABELED, VENDOR'S NAME MANUFACTURER'S NAME AND LOCATION PRODUCTION DATE AND BATCH NO.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE , STOCK NUMBER, HAZARD LABEL, LOCAL SUPPLIER, AND COUNTRY OF ORIGIN MUST BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01 -- PURITY: A. GLUTARALDEHYDE SOLUTION 25% WT MINIMUM B. SPECIFICS GRAVITY AT 68 DEG.F 1.062GM/CC C. IRON, FE 5 PPM MAXIMUM D. PH: 4.1

1000021558

Chemicals & Misc.

Alkalinity Control

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM HYDROXIDE (HYDRATED LIME) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE POWDER FORM, CALCIUM HYDROXIDE, CA(OH)2 (TECHNICAL GRADE), FOR TO CONTROL PH, BICARBONATE, AND H2S CONTAMINATION. LIME IS ALSO A PRIMARY COMPONENT OF INVERT EMULSION MUDS, CALCIUM HYDROXIDE (HYDRATED LIME), 25 KG OR 50 LB BAG, SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE AND BATCH NO. NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021559

Chemicals & Misc.

Calcium ++ Source

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM SULFATE (GYPSUM) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE WHITISH POWDER FORM,HYDRATED CALCIUM SULFATE,FOR A SOURCE OF CALCIUM IONS TO TREAT CARBONATE CONTAMINATION IN HIGH PH MUDS, AND TO AVOID HOLE ENLARGEMENT WHEN ANHYDRITE IS DRILLED,25 KG OR 55 LBS/SACK,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH NO.,SAUDI ARAMCO STOCK NUMBER AND SAUDI ARAMCO P.O. NUMBER NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR BF PLY) THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED, PACKING SPEC CODES 8444-18 APPLIES. AUTHORIZED SAUDI ARAMCOÕS PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). KITS COMPONENTS ITM QTY DESCRIPTION 01 -- SPECIFICS GRAVITY 2.3 GM/CU CM 02 -- PARTICLE SIZE: A. DRY SCREEN PASS THROUGH 100 US MESH 100% MINIMUM 03 -- PURITY: A. CALCIUM SULFATE(CASO4.1/2H2O) OR (CASO4. 2H2O): 95% MINIMUM B. CALCIUM CARBONATE, CACO3: 1.5% MAXIMUM C. CLAYS 1.5% MAXIMUM

1000021603

Chemicals & Misc.

LCM

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) 4 PLY PAPERSACK; SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE FORM,COTTONSEED HULLS,FOR LOST CIRCULATION,FINES & DUST FREE,25 KG OR 50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000021673

Chemicals & Misc.

Shale Stabilizer

ADMIXTURE: DRILLING MUD; PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA); MINIMUM 32% ACTIVE NON CONFIGURED; ADMIXTURE: DRILLING MUD, PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA), MINIMUM 32% ACTIVE FROM LIQUID BASE MATERIAL PARTIALLY HYDROLIZED POLYACRYLAMIDE SERVICE SHALE STABILIZER COMPOSITION 32% ACTIVE CONTAINER 5 GAL/CAN STANDARDS SUPPLEMENTARY REQUIREMENTS DRILLING FLUID ADDITIVE THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000021675

Chemicals & Misc.

WBM HT Fluid Loss Reducer

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; DRY POWDER FORM, MODIFIED RESINATED LIGNITE DARK BROWN POWDER, FOR WATER SOLUBLE FILTRATE REDUCER FOR FLUID LOSS CONTROL AND RHEOLOGY STABILIZER IN HIGH TEMP WATER BASED MUD WELLS, 25 KG OR 55 LB BAG, SG: 1.32-1.35, COMPATIBLE USE WITH LIGNOSULFONATE AND LIGNITES, MAGNESIUM AND CHLORIDE, NORMAL TREATMENT: 2-6 LB/BBL FOR FLUID LOSS CONTROL AT TEMPERATURE APPROACHING 400 DEG F (204 DEG C), THE SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF. AUTHORIZED SAUDI ARAMCO#S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000021677

Chemicals & Misc.

LCM

ADMIXTURE: DRILLING MUD; MARBLE CHIPS: (1900-2100 MICRONS) METAMORPHIC CALCIUM CARBONATE CACO3 & CAMG (CO3)2 ADMIXTURE DRILLING MUD; DRY CHIPS FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED,OIL-BASED AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,(1900-2100 MICRONS) METAMORPHIC CALCIUM CARBONATE, PURE, SOLUBLE,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE, LIMESTONE CHIPS ARE NOT ACCEPTABLE, LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT MINIMUM TENSILE STRENGTH FACTOR 5, FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT LEAST 75% OF THEIR SHELF LIFE REMAINING (THE PERIOD FROM THE DATE OF MANUFACTURE TO THE WARRANTED EXPIRATION DATE) WHEN SHIPPED OR RECEIVED AT DESIGNATED PLACE OF DELIVERY TO SAUDI ARAMCO.#REFER TO SAP NUMBER: 1000840600 FOR DISPOSABLE SUPER SACKS SPECIFICATION# THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70-2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 5 US MESH MAXIMUM 10% WT PASSING THROUGH 20 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 1900-2100 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

1000021679

Chemicals & Misc.

LCM

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) MULTI-WALL SACK; SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE FORM,MICA,FOR LOST CIRCULATION,25 KG OR 50 LB BAG,17 LB/FT MAXIMUM, SIEVE SPECIFICATION 2% ON MESH NO 6, 22% ON MESH NO 8, 28% ON MESH NO 12, 20% ON MESH NO 16, 15% ON MESH NO 20, 9% ON MESH NO 40, 4% THRU MESH NO 40 MULTI-PLY BAG, SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021741

Chemicals & Misc.

SODIUM CHLORIDE, Salt

ADMIXTURE: DRILLING MUD; SODIUM CHLORIDE ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COLORLESS/ WHITE GRANULES OR CRYSTALS, MAIN COMPONENT FORM, SODIUM CHLORIDE (NACI), FOR A WATER SOLUBLE WEIGHTING AGENT FOR FORMULATING SOLIDS FREE COMPLETION BRINES. TO FORMULATE CLEAR SOLUTION WITHOUT SUSPENDED MATTERS. ALSO, SALT SATURATED DRILLING FLUIDS ARE USED FOR DRILLING EVAPORITE SALT SECTIONS. SODIUM CHLORIDE, 1000 KG OR 2200 LB BAG, FREE FLOWING, 0.04 MM-0.4 MM GRAIN, SIZE NON-BREATHABLE FABRIC BAG W/ DISPOSABLE LIFTING STRAP, STACKABLE W/O PALLET & WITHOUT BOTTOM SPOUT, MIN TENSILE STRENGTH FACTOR 5 NORMAL HANDLING, SLNN-99SS MOISTURE-PROOF BIG BAGS W/LIFTING STRAPS

1000021813

Chemicals & Misc.

Ground Marble, 9-11 Micron

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3) METAMORPHOSED, FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS, GROUND MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2, BREATHLESS 1000 KG OR 2200 LB BAG, PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021814

Chemicals & Misc.

LCM

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED, FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS, GROUND MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2,MUTI-WALLED, 25 KG OR 50 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70-2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 100 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 9-11 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

1000021815

Chemicals & Misc.

LCM

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; 550-650 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED, FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2, MULTI-WALLED, 25 KG OR 50 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 550-650 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER(EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS(COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70-2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 20 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 550-650 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

1000021818

Chemicals & Misc.

LCM

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE;(550-650) MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3) METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE, METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG(CO3)2,BREATHLESS 1000KG OR 2200LB BAG,PROPERLY LABELED,VENDOR'S NAME, MFR'S NAME AND LOCATION, PRODUCTION DATE, BATCH NO. & STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 550-650 MICRON PARTICLE, 95% SOLUBLE 15%HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF,UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS.PRODUCT MFR &/OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS(COA)AND CERTIFICATE OF ORIGIN(COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OFTHEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MFR TO# THE WARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.# REFER TO SAP NUMBER: 1000840600 FOR # DISPOSABLE SUPER SACKS SPECIFICATION# THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXP. DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70- 2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 20 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 550-650 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MIN.

1000021819

Chemicals & Misc.

LCM

ADMIXTURE: DRILLING MUD; GROUND MARBLE: MEDIUM GRADE; 135-165 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;DRY,FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED & SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,GROUND MARBLE MEDIUM ,135-165 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000KG OR 2200LB BAG,PROPERLY LABELED,VENDOR'S NAME, MFR'S NAME & LOCATION, PRODUCTION DATE, BATCH NO. & STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 135-165 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF,UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATICCONDITIONS. PRODUCT MFR & OR SUPPLIERREQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OF THEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE TO# THE WARRANTED EXPIRATION DATE)WHEN SHIPPED OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO. REFER TO SAP NUMBER: 1000840600 FOR DISPOSABLE SUPER SACKS SPECIFICATION. THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXP. DATE & COUNTRY OF ORIGIN BE PRINTED ON THECONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70- 2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 60 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 135-165 MICRONS 3- ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

1000021975

Chemicals & Misc.

WBM Detergent

AGENT: WELL STIMULANT; 20 LITER (5GAL.) CAN. . AGENT WELL STIMULANT; FOR SURFACTANT & DETERGENT FOR DRILLING WATER & LOW SOLID MUD,LIQUID FORM,20 L OR 5 GAL CAN,PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

1000022131

Chemicals & Misc.

Degreaser

DEGREASER: GENERAL PURPOSE; SLIK NO. 5; 55 GALLON DRUM . CLEANER; DEGREASER, GENERAL PURPOSE TYPE,LIQUID FORM,FOR RIGS, CUTTING WASH FOR OIL MUD SYSTEMS & OIL SLICK DISPERSANT,55 GAL DRUM,TYPE "SLIK NO 5", SOLUBLE IN WATER & ORGANIC SOLVENTS REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644175..PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

1000022134

Chemicals & Misc.

Corrosion Inhibitor

INHIBITOR: CORROSION; 55-GAL DRUM. . . INHIBITOR; CORROSION, COAT-415 TYPE,55 GAL DRUM,CATIONIC, OIL SOLUBLE, DISPERSIBLE IN WATER BASED DRILLING MUDS, FILMING POLYAMINE SALT OF A MODIFIED FATTY ACID FOR DRILL PIPE PROTECTION.PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

1000022135

Chemicals & Misc.

HTHP Corrosion Inhibitor

INHIBITOR: CORROSION; 55-GAL DRUM. . . INHIBITOR; 55 GAL DRUM,A BLEND OF AMINES & IMADAZOLINES FUNCTION GROUPS, OIL SOLUBLE /WATER DISPERSIBLE CORROSION INHIBITOR, AMINE BASEDAMINE BASED, RECOMMENDED FOR USE IN HIGH TEMPERATURE, HIGH PRESSURE ENVIRONMENTS UP TO 350-400 DEG F PROVIDES EXCELLENT CORROSION PROTECTION IN SOUR H2S, OR SWEET CO2 OIL & GAS WELLS. DISPERSIBLE IN FRESH, BRACKISH OR BRINE WATER. PACKER FLUID & CORROSION INHIBITOR. AUTHORIZED SAUDI ARAMCO#S PERSONNEL WILL CARRY OUT SAMPLING & TESTING AS NEEDED.PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

1000022136

Chemicals & Misc.

Corrosion Inhibitor

INHIBITOR: CORROSION; 55-GAL DRUM. . . INHIBITOR; CORROSION, COAT B-1400 TYPE,55 GAL DRUM,CATIONIC, WATER SOLUBLE, HETEROCYCLIC AMINE, BLENDED WITH METHANOL MICROBIOSTAT TO CONTROL AEROBIC & ANAEROBIC BACTERIA GROWTH, USE AS A CORROSION INHIBITOR PACKER FLUID.PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

1000022138

Chemicals & Misc.

ADDITIVE DRILLING FLUID

KEROSENE, LOW TOXICITY, ODORLESS ADDITIVE DRILLING FLUID; CLEAR LIQUID, FREE FROM SUSPENDED MATTER FORM,KEROSENE, LOW TOXICITY, ODORLESS BASE OIL ADDITIVE,FOR AA OIL-BASED DRILLING FLUIDS,LOW AROMATIC OIL,BULK DELIVERY,LOW TOXICITY OIL COMPATIBLE WITH ALL OIL-BASED DRILLING FLUIDS ADDITIVES (EMULSIFIERS, ORGANOPHILIC CLAYS, AND FILTRATE CONTROL AGENTS) SPECIFIC GRAVITY @ 15 DEG C .77- 79 (ASTM D 1298), FLASH POINT: MORE THAN 185 DEG F (85 DEG C) (ASTM D 93), ANILINE POINT: MORE THAN 167 DEG F (75 DEG C) (ASTM D 611), TOTAL AROMATICS: LESS THAN . 5% VOL (ASTM D 1319), OLEFINS CONTENT: NIL PPM, BENZENE CONTENT: NIL PPM, POLYNUCLEAR AROMATIC: NIL PPM, LC50: MORE THAN 100000 PPM. (MYSID SHRIMP NINETY-SIX HOUR BIOASSAY TEST). AUTHORIZED SAUDI ARAMCO#S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED.

1000022170

Chemicals & Misc.

Potato Starch [SACK]

ADMIXTURE: DRILLING MUD; 25 KG BAG; POTATO STARCH STABLE AGAINST BACTERIA ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COARSE GRANULATED POWDER FORM,POTATO STARCH,FOR PROVIDES FILTRATE CONTROL W/MINIMUM VISCOSITY BUILDUP. THE PRODUCT IS A NON-IONIC POLYMER USED IN WATER- BASED FLUIDS WITH HIGH CONCENTRATIONS OF MONOVALENT AND DIVALENT CATIONS OR COMBINATIONS OF ELECTROLYTES AND IN CLAY-FREE, NON-DISPERSIVE SYSTEMS,POTATO STARCH,25 KG OR 50 LB BAG,NO PARTICLES (RESIDUE) GREATER THAN 2000 MICROMETERS SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. MULTI-WALLED BAGS, SEALED WITH INNER POLYETHYLENE COATING, MAIN COMPONENT PREGELATINZED, NON- FERMENTING POTATO STARCH BIODEGRADABLE AND ENVIRONMENTALLY ACCEPTABLE NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000022179

Chemicals & Misc.

LUBE 167

LUBRICANT: DRILLING MUD; DIAMINE AND FATTY ACID WITH ALCOHOL AMIDE IN VEGETABLE OIL LUBRICANT; DRILLING MUD TYPE,LIQUID, SOLIDS FREE, AMBER FORM,208.2 L (55 GAL) DRUM,NON-TOXIC LUBRICANT FOR REDUCING ROTATIONAL TORQUE, DRAG AND BIT BALLING, CAUSE NO ADVERSE EFFECTS ON MUD PROPERTIES AND CAN BE USED IN ALL DIFFERENT TYPES OF WATER-BASED FLUIDS. THE PRODUCT MUST BE EFFECTIVE OVER A WIDE TEMPERATURE RANGE IN THE PRESENCE OF CONTAMINANTS INCLUDING HIGH SOLIDS, HIGH CALCIUM OR MAGNESIUM. SHOULD NOT CAUSE FOAM OR GREASE OUT. DRUMS MUST BE MARKED WITH: VENDORS'S NAME & LOCATION, PRODUCTION DATE, BATCH NO., PURCHASE ORDER NO., AND STOCK NO.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000029881

Chemicals & Misc.

Empty BIG BAG for Barite

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; ORANGE COLOR; (FOR BARYTES). CONTAINER; BARYTE TRANSPORT TYPE,0.99 M3 (35 CU FT),BODY AND CONE SECTION: M049 LID SECTION: M426 INLET AND OUTLET SPOUT: M326 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED LID MADE FROM WIO2 MATERIAL,ORANGE,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B) STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000029882

Chemicals & Misc.

Empty BIG BAG for Bentonite

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; BLUE COLOR; (FOR BENTONITE). CONTAINER; BENTONITE TRANSPORT TYPE,0.99 M3 (35 CU FT),BODY AND CONE SECTION: M047 LID SECTION: M425 INLET AND OUTLET SPOUT: M325 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED LID MADE FROM WIO2 MATERIAL,BLUE,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B) STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000029887

Chemicals & Misc.

Lifting Ring for BIG BAG

BIG BAG SYSTEM COMPONENTS: LIFTING RING: BIG BAG; TYPE 109.5. . RING; BIG BAG LIFTING TYPE,BIG BAG SYSTEM COMPONENTS, IBC. THE WIRE ROPE SLINGS SHOULD BE MADE OF STEEL FERRULES AS PER ARAMCO GI 7.029. TRANSPORT CONTAINERS LTD, TYPE 109.5..PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

1000029930

Chemicals & Misc.

ZIP TIE for BIG BAG

BIG BAG SYSTEM COMPONENTS: ZIP TIES: NYLON; BIG BAG; TYPE 120-R. . TIE; ZIP TYPE,NYLON,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD TYPE "120-R"..PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000177936

Chemicals & Misc.

Alkalinity Control

CHEMICAL; GR USP, CITRIC ACID, FOR LABORATORY, POWDER FORM, 50 KG (110 LB) NET WT POLYETHYLENE LINED DRUM, 99.5% CITRIC ACID MIN, CITRIC ACID (ANHYDROUS), REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644278

1000182767

Chemicals & Misc.

Glycol

ANTIFREEZE; MONO ETHYLENE GLYCOL (MEG) TYPE,SPECIFIC GRAVITY 20/20 C 1.115-1.116, DISTILLATION RANGE 196.0-199.0 DEG C AT 760 MM HG, WATER (W/W) 0.05% MAX, IRON (PPM W/W) 0.1 MAX, ACIDITY WT AS ACETIC ACID 0.001% MAX, 225-250 KG, 208.2 L (55 GAL) DRUM, TECHNICAL, LIQUID, ARAMCO LABORATORY ANALYSIS IS REQUIRED, DRUM TO BE LABELED IN ARABIC AND ENGLISH AS FOLLOWS, "MONO ETHYLENE GLYCOL (MEG)" S/N 26-382-444-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644200

1000183214

Chemicals & Misc.

Acid

CHEMICAL; GR TECHNICAL,HYDROCHLORIC ACID,FOR REGENERATION OF DEMINERALIZER BEDS,LIQUID FORM,49 L (13 GAL) POLYETHYLENE CARBOY ENCASED IN A WOODEN BOX,31% SOLUTION W/W MIN, IRON 20 PPM MAX, SULFATE 0.2% MAX, CLORINE (CL2) 100 PPM MAX, ORGANIC CONTAMINANTS 0.05 GM/L MAX,MURIATIC ACID,UN 1789, CAS NO 7647-01-0,US DEPT OF TRANSPORT HAZARDOUS LABEL "CORROSIVE" MUST BE AFFIXED TO CONTAINER REQUIRES SAUDI ARAMCO HAZCOM LABEL IN

1000184370

Chemicals & Misc.

Barabuf, pH Stabilizer

CHEMICAL; GR TECHNICAL,M20,POWDER FORM,22.7 KG (50 LB) - 25.0 KG (55 LB) SACK,96% MG0 MIN,MAGNESIUM OXIDE,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE PRODUCT SHOULD BE PACKED IN 3 OR 4 PLY PAPER SACKS

1000184543

Chemicals & Misc.

Methanol

CHEMICAL; GR A,METHANOL,LIQUID FORM,208.2 L (55 US DRUM,SYNTHETIC,METHYL ALCOHOL (WOOD ALCOHOL),ASTM D SPEC O-M-232G GRADE A,DRUM TO BE LABELED IN ARABIC FOLLOWS: "METHANOL" S/N 26-646-940-00 REQUIRES SAUD HAZCOM LABEL IN MM# 1000642494

1000185026

Chemicals & Misc.

O2 Scavenger

CHEMICAL; GR COMMERCIAL HIGH,SODIUM SULFITE,FOR REMOVE TRACES OF DISSOLVED OXYGEN,POWDER FORM,60 KG (132 LB) PLASTIC RIMMED FIBER OR METAL DRUM WITH POLYETHYLENE LINER,95% ANHYDROUS SODIUM SULFITE BY WT MIN, CATALYZED WITH COBALT -0.03% BY WT MIN,OXYGEN SCAVENGER,26-SAMSS-027,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644272.. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000185389

Chemicals & Misc.

Alkalinity Control

CHEMICAL; GR TECHNICAL,POTASSIUM HYDROXIDE,FREE FLOWING GRANULAR OR FLAKES FORM,25 KG (55 LBS)/SACK,POTASSIUM CARBONATE, K2CO3 0.8% WT, MAXIMUM POTASSIUM CHLORIDE 0.02% WT MAXIMUM, IRON 0.001% WT MAXIMUM,90% KOH PURITY, SHIPMENT OF PRODUCT SHALL CONFIRM TO SAUDI ARAMCO EXPORT PACKING MANUAL. SAUDI ARAMCO WILL CARRY OUT SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000186247

Chemicals & Misc.

SODIUM HEXAMETAPHOSPHATE

CHEMICAL; GR FOOD,SODIUM HEXAMETAPHOSPHATE,FOR POTABLE WATER TREATMENT,GRANULAR FORM,40-45 KG (88-100 LB) DRUM,SODIUM HEXAMETAPHOSPHATE,AWWA B502,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642502

1000186443

Chemicals & Misc.

Alkalinity Control

CHEMICAL; GR ACS,SODIUM SULFITE,FOR REDUCE FREE CHLORINE & OXYGEN CONTENT OF RAW WATER PRELIMINARY TO WATER SOFTENING,POWDER FORM,50 KG (110 LB) DRUM WITH POLYETHYLENE INNER BAG,97% ANHYDROUS SODIUM SULFITE MIN UNCATALYZED SOLUBLE IN WATER,OXYGEN SCAVENGER,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642488

1000187171

Chemicals & Misc.

Glycol

ANTIFREEZE; TRIETHYLENE GLYCOL TYPE,TECHNICAL, LIQUID, 208.2 LITER/ DRUM TO BE LABELED IN ARABIC AND ENGLISH AS FOLLOWS: "TRIETHYLENE GLYCOL" S/N 26-922-105-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644191

1000732382

Chemicals & Misc.

Hole Cleaning sweeb agent

CLEANER; CONTACT TYPE,LIQUID FORM,FOR ELECTRIC MOTOR AND EQUIPMENT,20 LITER CAN,HYDROCARBON BASED CLEANER & DEGREASER,FLASH POINT (CLOSED CUP) 63 DEG C, NON-CONDUCTIVE & NON-CORROSIVE, APPERANCE CLEAR LIQUID. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.# 

1000757567

Chemicals & Misc.

Powder Solid Form, Lost Circulation Material

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM, LOST CIRCULATION MATERIAL, FOR VISCOUS PILL FOR CURING LOSS CIRCULATION DURING DRILLING OPERATION, ORGANIC CELLULOSIC FIBERS AND ADDITIVES, 40 LB (18.14 KG) SEALED MULTI-WALL PAPER BAG, TAN COLOR, SPECIFIC GRAVITY 1.2, INSOLUBLE IN WATER

1000757568

Chemicals & Misc.

ADMIXTURE, DRILLING MUD, CLEAR LIQUID

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,ADDITIVE RETARDER,FOR CROSS-LINKING X-LINK POLYMER FOR MIXING VISCOUS PILLS FOR CURING FLUID CIRCULATION LOSS DURING DRILLING OPERATION,CROSS LINKING MATERIAL FOR X-LINK POLYMER,5 GALLONS PER CAN,SPECIFIC GRAVITY 1.323 @20 DEG C, BOILING POINT 221 DEG F (105 DEG C), MOLECULAR WEIGHT 112.0, SOLUBLE IN WATER

1000757569

Chemicals & Misc.

WBM Viscosifier

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SILICATE,FOR VISCOSIFIER USED IN MILLING CASING WINDOWS,CALCIUM ALUMINOSILICATE,50 LB SEALED MULTI-WALL PAPER BAG,GRAY COLOR, SPECIFIC GRAVITY 0.6@ 20 DEG C, PH 11, INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER , PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG FOLLOWS: (CONTAINER) SHALL BE AS 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER , HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000757580

Chemicals & Misc.

Lubricant for WBM

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM, WATER SOLUBLE LUBRICANT, FOR REDUCES TORQUE, DRAG AND FRICTION IN WATER BASED DRILLING MUDS, ND OF SURFACTANT MIXTURES POLYOLS DESIGNED FOR USE AS MIUM LUBRICANT, 200 LITER DRUM, TOLERANT TO HIGH PH AND COMPATIBLE IN HIGH SALINE FLUIDS INCLUDING SATURATED NACL, KCL, NABR, K-FORMATE CALCIUM CHLORIDE FLUIDS WITHOUT GREASING OUT AND/OR CHEESING. STABLE OVER WIDE RANGE OF TEMPERATURE UP TO 325 F DEG. THE NORMAL DOSAGE: 0.5-3% BY VOL. FLASH POINT >200 DEG F (PMCC). SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL, THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN SHALL BE PRINTED ON THE CONTAINER. AUTHORIZED SAUDI ARAMCO PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000774250

Chemicals & Misc.

POTASSIUM FORMATE SOLUTION

ADMIXTURE DRILLING MUD; LIQUID FORM,POTASSIUM FORMATE SOLUTION (KCOOH & H20), FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION, POTASSIUM FORMATE 75% AND WATER 25% SOLUTION, CLEAR LIQUID, DENSITY 1570 KG/M3 @ 20 DEG C, PH 10.0 @ 25 DEG C,1000 LITER (1570 KG) IBC OR TOTE CONTAINER (CO), IRON LESS THAN 10 PPM, CHLORIDE CONTENT LESS THAN 40 PPM, TURBIDITY MAX 10 NTU, SOLUBLE IN ALL PROPORTIONS IN WATER EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF.

1000774251

Chemicals & Misc.

Base brine fluid & completion fluid

ADMIXTURE DRILLING MUD; FREE FLOWING SOLID CRYSTALS FORM,POTASSIUM FORMATE 97% WEIGHT (KCOOH),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM FORMATE 97% WEIGHT & CONDITIONING AGENT 3% WEIGHT, POWDER, WHITE COLOR, BULK DENSITY 1080 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.91, SOLUBILITY IN WATER 355 GR/100 ML @ 20 DEG C , MELTING POINT 169 DEG C TEMPERATURE STABILITY UP TO 400 ¡F (204 ¡C), SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE, IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF. AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000774252

Chemicals & Misc.

Base brine fluid & completion fluid

ADMIXTURE DRILLING MUD; FREE FLOWING GRANULES FORM,SODIUM FORMATE POWDER 98% (NACOOH),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,SODIUM FORMATE 98% WEIGHT & OTHER ORGANICS 2% WEIGHT, WHITE COLOR, BULK DENSITY 900-950 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.92, SOLUBILITY IN WATER 81GR/100 ML @ 20 DEG C , MELTING POINT 253 DEG C , TEMPERATURE STABILITY UP TO 400 ¡F (204 ¡C), SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCOEXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE, IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF. AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000775550

Chemicals & Misc.

Performing Second Stage Cementing

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 8.0-12 MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON 9-5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE, SIZED LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62, INSOLUBLE IN WATER, 25 KG PER SACK,GRAVEL MADE FROM LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING 10,000 MICRON AND 8,000 MICRON SIEVES THE GRAVEL RETAINED ON TOP OF THE 8,000 MICRON SIEVE IS TO BE COLLECTED AND SACKED WHILE THE GRAVEL RETAINED ON TOP OF THE 10,000 MICRON SIEVE SHOULD BE DISCARDED AUTHORIZED. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000775551

Chemicals & Misc.

LCM

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 18.0 -26.5 MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON 9-5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62, INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING MUST BE PREPARED BY USING FOUR SIEVES 26.5 MM, 22.4 MM, 20 MM, AND 18 MM. THE GRAVEL RETAINED ON TOP OF THE 22.4 MM,20 MM AND 18 MM SIEVES SHOULD BE COLLECTED AND SACKED WHILE THE GRAVEL RETAINED ON TOP OF THE 26.5 MM SIEVE SHOULD BE DISCARDED. AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000775557

Chemicals & Misc.

BDF-398: lcm & bridge agent

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SYNTHETIC GRAPHITE,FOR LOSS CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-FRACTURED FORMATIONS,SYNTHETIC GRAPHITE,50 LB. BAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS LUBRICITY FOR WATER BASED FLUIDS GREY-BLACK ANGULAR MATERIAL,ODORLESS, SG 1.75, INSOLUBLE IN WATER, MEDIAN PARTICLE SIZE D-50: 50 15-25 LB/BBL AS A BACKGROUND CONCENTRATION FOR SEEPAGE AND LOST CIRCULATION CONTROL. 60-110 LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONESOR ON BOTTOM PRIOR TO TRIPS AND 4-10 LB/BBL FOR LUBRICITY IN WATER-BASED FLUIDS. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

1000775558

Chemicals & Misc.

Sized CaCO3 5 Micron for Bridging Agent

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 5 MICRONS FORM,CALCIUM CARBONATE, FOR BRIDGING AGENT FOR FLUID LOSS CONTROL, INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS, SIZED CALCIUM CARBONATE POWDER, 50 LB. BAG, SG 2.7, PARTICLES SIZE: 5 MICRONS. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.

1000775559

Chemicals & Misc.

Sized CaCO3 25 Micron for Bridging Agent

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 25 MICRONS FORM,CALCIUM CARBONATE, FOR BRIDGING AGENT FOR FLUID LOSS CONTROL, INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS,SIZED CALCIUM CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 25 MICRONS. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. 

1000775560

Chemicals & Misc.

Sized CaCO3 55 Micron for Bridging Agent

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 50 MICRONS FORM, CALCIUM CARBONATE,FOR BRIDGING AGENT FOR FLUID LOSS CONTROL, INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS, SIZED CALCIUM CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 50 MICRONS. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.

1000775561

Chemicals & Misc.

Clay Grabber: Flocculent & Encapsulated Clay agent (also for HPWBM)

ADMIXTURE DRILLING MUD; LIQUID FORM,NON-IONIC LIQUID POLYMER,FOR FLOCCULANT AND CLAY ENCAPSULATOR. IT STOPS SHALE DISPERSION AND HELPS STABILIZE SHALES IN THE WELLBORE,HIGH MOLECULAR WEIGHT, NON-IONIC LIQUID POLYMER,5 GAL PAIL,OPAQUE LIQUID, OFF-WHITE COLOR, PH:6.5-7.5, CONCENTRATION 30-40 (1% ACTIVE POLYMER), SG 1.02 -1.06, STABILITY UP TO 300 DEG F, IMIISCIBLE IN WATER FOR RESULTS CLAY GRABBER FLOCULANT SHOULD BE MIXED THROUGH A HIGH SHEAR HOPPER. 0.5-1.0 LB/BBL IN THE HYDRO-GUARD SYSTEM. 0.25-0.5 LB/BBL FOR CLEAR WATER DRILLING. 0.5-1.0 FOR TROUBLESOME SHALES IN A WATER- BASED SYSTEM. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000789220

Chemicals & Misc.

LCM

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,25 LB/SACK,APPEARANCE: FINE: BROWN POWDERED, BULK DENSITY: 31 LB/FT(497 KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS, DENSITY@20C (KG/L) 1.1, FREEZING POINT 190 C, FLASH POINT 193 C, OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000789221

Chemicals & Misc.

LCM

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,40 LB/SACK,APPEARANCE: COARSE:GRANUALTED MATERIAL, BULK DENSITY: 31 LB/FT(497 KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS, DENSITY@20C (KG/L) 1.1, FREEZING POINT 190 C, FLASH POINT 193 C, SOLUBILITY IN WATER: INSOLUBLE, OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

1000811421

Chemicals & Misc.

OHR-759, A co-surfactant agent

ADMIXTURE DRILLING MUD; LIQUID FORM,N-BUTANOL,FOR USED AS A CO-SURFACTANT TO REMEDIATE WELLBORE DAMAGE,SURFACTANT BLEND WITH N-BUTANOL 100%,55 GALLON DRUM,APPEARANCE CLEAR, COLORLESS LIQUID,ODOR SWEET, RELATIVE DENSITY:810 KG/M3 BOILING POINT:118 DEG C,FLASH POINT:37 DEG C, SOLUBLE IN WATER,AUTO-IGNITION TEMPERATURE 343¡C. ++THIS ITEM IS ONE OF COMPONENT USED TO FORMULATE THE MICRO-WASH SYSTEM FOR WELLBORE REMEDIATION AND REMOVE DAMAGE TO THE RESERVOIR DRILLED WITH INVERT EMULSION FLUIDS. ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MICRO-WASH ACID SYSTEM CONSISTS BAKER ++ HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000811422

Chemicals & Misc.

OHR-AC, Acid corrosion inhibitor

ADMIXTURE DRILLING MUD; LIQUID FORM,ACID CORROSION INHIBITOR,FOR USED AS AN ACID CONTROL ADDITIVE IN THE MICRO-WASH ACID SYSTEM,,CONTAINING PROPARGYL ALCOHOL 5-10%,METHANOL 30-60% AND BLEND OF NON-IONIC SURFACTANTS,55 GALLON DRUM,APPEARANCE:CLEAR AMBER LIQUID,ODOR:SWEET,SPECIFIC GRAVITY:885-897 KG/M3,FLASH POINT:10-15.6 DEG C, POUR POINT:LESS THAN -20.2 DEG C,SOLUBLE IN WATER, PH:4-6(5% IN 25% IPA/75% WATER),FLASH POINT:10-15.6 DEG C (TAG CLOSED CUP),VAPOUR PRESSURE:85MM HG AT 21 DEG C, ++ THIS ITEM PROVIDES CORROSION RESISTANCE WHILE REMEDIATING WELLBORE DAMAGE AND DESTROYING OIL-MUD FILTER CAKE, THE PRODUCT IS BIODEGRADABLE, ACID DISPERSIBILE AND IS TOLERANT FOR SALTS PRESENT IN ACIDS. ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.# 

1000811423

Chemicals & Misc.

OHR-757, Blend surfactants de-emalsifier agent

ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS.,FOR TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS,SODIUM TRIDECYL ETHER SULFATE 10-20%& OTHER COMPONENTS,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND ANIONIC SURFACTANTS., TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS, SODIUM TRIDECYL ETHER SULFATE 10- 20% & OTHER COMPONENTS, 275 GALLON IBC CONTAINER, APPEARANCE:TRANSPARENT, YELLOW LIQUID, ODOR:DISINFECTANT,SPECIFIC GRAVITY: 1086.5 KG/M3,. FLASH POINT> 100¡C SOLUBLE IN WATER, PH: 7.8 AT 25 DEG C, VISCOSITY: 28. 0CST AT 40¡C. ++ THIS MATERIAL IS USED AS ONE OF SURFACTANT COMPONENT IN THE MICRO-WASH ACID SYSTEM IT IS BLENDED OF NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL. ++ CONTAINER MUST BE PROPERLY LABELED WITH:VENDOR'S NAME MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS: PRIME-743, PRIME-760, PRIME-770 ,OHR- 759, OHR-AC, OHR-757, OHR- 750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000811424

Chemicals & Misc.

OHR-750,Blend surfactants de-emulsifyer & water wetting agent

ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,FOR TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES,ALKYPHENYL OXIDE SULPHONATES,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND ANIONIC URFACTANTS, TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES, ALKYPHENYL OXIDE SULPHONATES , 275 GALLON IBC CONTAINER , APPEARANCE:CLEAR ,YLLOW- ORANGE LIQUID, ODOR:DISINFECTANT SPECIFIC GRAVITY:1108 KG/M3,. BOILING POINT:212?F , FLASH POINT >100¡C, SOLUBLE IN WATER : PH:5.5 AT 25?C, VISCOSITY:69CST AT 40¡C PROPRIETARY BLEND THAT IS CUSTOM DESIGNED TO DISPERSE FILTER CAKE AS A COMPONENT IN MICRO-WASH ACID SYSTEM TO REMOVE OBM SKIN DAMAGE AND ALLOW THE RESERVOIR TO FLOW AT MAXIMUM POTENTIAL. IT IS BLEND OF NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL TENSION. NORMAL TREATMENT: 10 - 25% BY VOLUME ++ CONTAINER MUST BE PROPERLY LABELED WITH: VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED RECONFIGURED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000811425

Chemicals & Misc.

PRIME-743,-blend surfactants de-emulsifier & water wetting agent

ADMIXTURE DRILLING MUD; LIQUID FORM,GLYCEROL-BELEND OF NON-IONIC SURFACTANTS,FOR USED FOR REMOVE OIL-WET SOLIDS FROM THE WELLBORE AND WATER-WET METAL SURFACES.,GLYCEROL, BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,++ APPEARANCE OPAQUE YELLOW-ORANGE LIQUID, PH 7.6, SPECIFIC GRAVITY 1015 KG/M3, BOILING POINT 100 DEG, FLASH POINT GREATER THAN 93 DEG C, WATER SOLUBLE ++ FULLY COMPATIBLE AT ALLRATIOS WITH OIL MUD SPACERS AND OIL-NORMAL ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000811427

Chemicals & Misc.

PRIME-770, blend surfactants de-emulsifier & water wetting agent

ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,FOR TO CREATE AN EFFECTIVE FOLLOW-UP DISPLACEMENT NEWTONIAN CLEANING PILL USED TO REMOVE OIL-WET SOLIDS,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE: TURBID,` YELLOW-ORANGE LIQUID ODOR: MILD, SWEET SPECIFIC GRAVITY: 1098 KG/M3, FLASH POINT: GREATER THAN 100 DEG C(TCC),WATER SOLUBLE ++ FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED DRILLING FLUIDS. ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. ++ SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000811529

Chemicals & Misc.

LOSURF-259, surfactant

ADDITIVE DRILLING FLUID; LIQUID FORM,ISOPROPANOL AND HEAVY AROMATIC PETROLEUM NAPTHA,FOR BREAKS EMULSION IN OIL BASE MUD FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FILTER CAKE REMOVAL,5 GALLON CAN,ADDITIVE, DRILLING FLUID: LIQUID, ISOPROPANOL AND HEAVY AROMATIC PETROLEUM NAPTHA, BREAKS EMULSION IN OIL BASE MUD FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FOR FILTER CAKE REMOVAL, ISOPROPANOL AND HEAVY AROMATIC PETROLEUM NAPTHA, 5 GALLON CAN, APPEARANCE: CLEAR LIGHT AMBER, ALCOHOL ODOR, SPECIFIC GRAVITY: 0.92 @ 20 DEG C BOILING POINT: 92 DEG C, DISPERSES IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING EMULSIONS, NORMAL USE CONCENTRATION: 0.1 - 2.0 % V/V. NONIONIC NONEMULSIFIER BLEND, PRIMARILY DESIGNED FOR ACIDIZING LIMESTONE, DOLOMITE AND SANDSTONE FORMATION & FRACTURE TREATMENT ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID PRODUCTS, LOSURF-259, MUSOL, N-FLOW 325 & BDF-443. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000811540

Chemicals & Misc.

MUSOL, mutual solvent

ADDITIVE DRILLING FLUID; LIQUID FORM,ETHYLENE GLYCOL MONOBUTYL ETHER SOLVENT,FOR REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING CONDITION OF THE FORM,ETHYLENE GLYCOL MONOBUTYL ETHER,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, ETHYLENE GLYCOL MONOBUTYL ETHER SOLVENT, USED WITH NONANIONIC SURFACTANT (LOSURF-259) TO REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING CONDITION OF THE FORM, ETHYLENE GLYCOL MONOBUTYL ETHER, 55 GALLON DRUM , APPEARANCE: COLORLESS LIQUID, MILD ODOR, SPECIFIC GRAVITY: 0.9 @ 20 DEG C BOILING POINT: 171 DEG C SOLUBLE IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING' EMULSIONS, NORMAL USE CONCENTRATION: 10 % V/V. PRIMARILY USED DURING ACIDIZING OPERATIONS IN SILICATE FORMATION. ++ CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID PRODUCTS LOSURF-259, MUSOL, N-FLOW 325 & BDF-443. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000811647

Chemicals & Misc.

N-FLOW 325, Formic Acid Precursor

ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL DIFORMATE,FOR RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE AND REPAIR FILTER CAKE AND REPAIR MUD DAMAGE,DIETHYLENE GLYCOL DIFORMATE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, DIETHYLENE GLYCOL DIFORMATE , RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE AND REPAIR MUD DAMAGE, DIETHYLENE GLYCOL DIFORMATE, 55 GALLON DRUM , APPEARANCE: LIGHT YELLOW LIQUID,ODOR: CHARACTERISTIC, SPECIFIC GRAVITY 1.2 GM/CC, BOILING POINT:240 DEG C, PH:2.8 SOLUBLE IN WATER ++ COMPATIBLE WITH OIL, FORMATION BRINE AND DRILL- IN FLUID BASE OIL (DIESEL), THE CHEMICAL IS DISSOLVED IN THE CARRIER BRINE, BECAUSE THE ACID LIBERATION ACTION IS SLOW. ACID WILL BE GENERATED OVER THE SUBSEQUENT PERIOD OF TIME, NORMAL CO. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000812015

Chemicals & Misc.

BORE-HIB: bore hole stabilizer

ADDITIVE DRILLING FLUID; DARK YELLOW LIQUID FORM,GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN BE DEPLETED WHEN DRILLING ANHYDRITE, GREEN. CEMEN,GLYCERINE AND SILICATE SALT MIXTURE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: DARK YELLOW LIQUID, GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES USED AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND C OUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. APPEARANCE DARK YELLOW SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

1000812016

Chemicals & Misc.

GEM GP: shale inhibitor

ADMIXTURE DRILLING MUD; DARK BROWN LIQUID FORM,POLYALKYLENE GLYCOL OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED TO IMPROVE LUBRICITY, SHALE STABILITY AND REDUCE BIT BALLING. NORMAL TREATMENT,POLYALKYLENENE GLYCOL,55 GALLON DRUM,CONCENTRATION IS 2-6% BY VOLUME IN A MUD SYSTEM BUT OPTIMUM CONCENTRATION SHOULD BE IDENTIFIED ON A CASE BY CASE BASIS. APPEARANCE YELLOW TO BROWN LIQUID, ODOR MILD, SPECIFIC GRAVITY 1.01, BOILING POINT (¡C) 126 C, SOLUBILITY IN WATER MISCIBLE. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

1000812034

Chemicals & Misc.

BDF-443, Wetting agent surfactant

ADDITIVE DRILLING FLUID; LIQUID FORM,SURFACTANT,FOR VALUE EMULSIFIER, CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID CLEANING,BLEND OF PROPRIERATORY CHEMICALS,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, SURFACTANT, EMULSIFIER, CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID CLEANING, BLEND OF PROPRIERATORY CHEMICALS, 55 GALLON DRUM , APPEARANCE: MILKY TO PALE YELLOW LIQUID, ODOR: MILD SWEET, SPECIFIC GRAVITY 1.04 GM CC, BOILING POINT: 240 DEG C, PH 5 - 7.5 (2.5 %), FLASH POINT: GREATER THAN 100 DEG C, SOLUBLE IN WATER ++ IS WATER WET SURFACTANT DISSOLVED IN THE CARRIER BRINE ALONG WITH N-FLOW. IT CHANGES THE WETTABILITY OF OIL MUD FILTER CA. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.# 

1000812301

Chemicals & Misc.

Clayseal: clay Suppressing agent

ADMIXTURE CEMENT; FOR CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING.,TYPE ADMIXTURE, CEMENT HYDRO GUARD, CLAYSEAL,ETHOXYLATED POLYAMINE,5 GAL GALLON PAIL,APPEARANCE: TRANSPARENT YELLOW LIQUID, ODOR: AMINE, SPECIFIC GRAVITY: 1GM/CC, SOLUBILITY: SOLUBLE IN WATER. CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING ALL BENTONITE ADDITIONS AND ADDING FLUID LOSS ADDITIVES.INITIAL TREATMENTS IN NONDISPERSED SYSTEMS MAY CAUSE SLIGHT FLOCCULATION AND MAY REQUIRE A THINNER. CLAYSEAL ADDITIONS WILL BE 4-8 LB/BBL AND FOR BEST RESULTS A MINIMUM OF 4 LB/BBL OF CLAYSEALÀ IS REQUIRED. ++CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++HYDRO -GUARD PLUS MUD SYSTEM CONSISTS HALLIBURTON BAROID PRODUCT, CLAYSEAL, GEM GP& BORE-HIB. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000814796

Chemicals & Misc.

GLACIAL ACETIC ACID, carbonate filter cake breaker

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,ACETIC ACID> 96%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE PARTICLES IN WELLBORE REMEDIATION,ACETIC ACID > 96%,275 GALLON IBC TOTE,CLEAR LIQUID, STRONG PUNGENT VINEGAR ODOR DENSITY 1050 KG/M3, BOILING POINT 117 DEG C, FLASH POINT >102.2¡C, SOLUBLE IN WATER,SOLUBLE AUTO-IGNITION TEMPERATURE 799¡C. ACETIC ACID IS A COMPONENT OF THE BAKER HUGES MICRO- WASH SYTEM TO IMPROVE WELL PRODUCTIVITY. IT IS A CARBOXYLIC ACIDS WITH THE MOLECULAR FORMULA OF CH3COOH, NORMAL TREATMENT 1 - 15 % BY VOLUME. 275 GALLON IBC CONTAINER MUST BE PROPERLY LABELED WITH, VENDORS NAME, MANUFACTURERS NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER,SAUDI ARAMCOS PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).PACKING/CONTAINER SPECIFICATIONS:LEAK PREVENTION MECHANISM :VALVE CLOSED WITH SCREW CAP, PE-DISC AND FLAT GASKET, VALVE HANDLE SECURED WITH A LOCKING SCREW.INNER CONTAINER SHOULD BE HIGH MOLECULAR WEIGHT, HIGH DENSITY POLYETHYLENE (HMWHDPE), EXTRUSION BLOW MOULDED, ESPECIALLY SHAPED TO ENSURE COMPLETE DISCHARGE OF CONTENTS.OUTER CONTAINER SHOULD BE RIGID, WELDED GALVANIZED TUBULAR STEEL GRID WITH A LARGE PERMANENTLY FIXED IDENTIFICATION PLATE.MOULDED BOTTOM SHELL SHOULD BE PRESSED GALVANIZED STEEL BASE SHAPED TO SUPPORT THE INNER CONTAINER AND ASSIST TOTAL DRAINAGE. PALLETS SHOULD BE STEEL AND HAVE 4 WAY ENTRY. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000823315

Chemicals & Misc.

ALL-TEMP: deflocculant & rheological stabalizer

ADDITIVE; DRILLING MUD TYPE,FOR USED AS HT THINNER IN WIDE RANGE OF WATER-BASE.,SOLID - WHITE POWDER FORM,25.0 LB/BAG,USED AS HT THINNER IN WIDE RANGE OF WATER-BASE. DOES NOT CONTAIN HEAVY METALS/CHROME OR REQUIRE SODIUM HYDROXIDE FOR ACTIVATION AND STABLE UP TO TEMPERATURE 400 F DEG(204 DEG). TREATMENT RANGE FROM 0.5 LB/BBL TO 3.0 LB/BBL, ODOURLESS, PH : 7-9 (1%AQ. SOLN.), SOLUBLE IN WATER, SHEAR STRENGTH, LB/100 FT_, 32 MAX PLASTIC VISCOSITY, CP, 32 MAX, YIELD POINT, LB/100 FT_, 32 MAX, 10 SECOND GEL, LB/100 FT_, 12 MAX, 10 MINUTE GEL, LB/100 FT_, 38 MAX, 30 MINUTE FILTRATE, ML, 48 MAX. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000823316

Chemicals & Misc.

ECCO-TEMP: Temperature extended

ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200 LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY : 1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20¡ C 1.05 - 1.15 ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000823317

Chemicals & Misc.

CHEMTROL X: high-temperature filtration-control agent

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE MUD.,SOLID - TAN TO BLACK POWDER FORM,50.0 LB/BAG,BLEND OF DERIVATIZED ACRYLIC COPOLYMER DEFLOCCULANT AND CAUSTICIZED LIGNITE PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE MUD. INITIAL TREATMENTS OF 2.0 TO 6.0 LB/BBL. NORMAL TREATMENT LEVELS ARE BASED ON TYPES OF WBM & NEEDED. APPEARANCE : SOLID, TAN TO BLACK POWDER, ODOR: EARTHY, SPECIFIC GRAVITY: 1.5 , PARTIALLY SOLUBLE IN WATER. SPECIFIC GRAVITY: 1.5 PH: 9-10 SOLUBILITY : PARTIALLY SOLUBLE IN WATER. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000823318

Chemicals & Misc.

KEM-SEAL PLUS: copolymer filtration control product

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR HTHP FILTRATION CONTROL ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS,SOLID - WHITE POWDER FORM,25.0 LB/BAG,HTHP FILTRATION CONTROL ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS, TEMPERATURES UP TO 500 DEG. F. TREATMENT RANGE VARIES BASED ON FILTRATE VALUE DESIRED AND WELL TEMPERATURE, A REASONABLE RANGE WILL BE 1 TO 6 LB/BBL.IS, SHOULD BE ADDED SLOWLY TO AVOID HIGH RAISE IN VISCOSITY. APPEARANCE : SOLID, WHITE POWDER, ODOR:SLIGHT, SPECIFIC GRAVITY :1300 KG/M3 @ 16 DEG. C, SOLUBILITY : SOLUBLE IN WATER, SALT/HARD WATER PERFORMANCE, FILTRATE, ML: 17 MAX AGING PERFORMANCE, FILTRATE, ML: 19 MAX. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000792804

Chemicals & Misc.

Lost Circulation Material

ADMIXTURE DRILLING MUD; SOLID FORM,ORGANIC CELLULOSE FIBER, LIGHT TAN / BROWN,FOR USED FOR SEALING THIEF ZONES, HIGHLY FRACTURED/VUGULAR FORMATIONS AND MINIZING THE RISK OF DIFFERENTIAL STICKING,A FINELY SIZED (MICRONIZED) ORGANIC CELLULOSE FIBER,25LB.BAG,ODORLESS, SG: 0.9, MIX OF FINELY DIVIDED CELLULOSE FIBERS, INSOLUBLE IN WATER, NON TOXIC, PH: 6.5-7.5,SIEVE SPECIFICATION FOR FRAC-SEAL COARSE: RETAIN ON 40 MESH SIEVE: 4.93%, RETAIN ON 60 MESH SIEVE: 2.17%, RETAIN ON 80 MESH SIEVE: 3.73%, RETAIN ON 100 MESH SIEVE: 6.17%, RETAIN ON 140 MESH SIEVE:6.87%, RETAIN ON 170 MESH SIEVE:17.63%, RETAIN ON 270 MESH SIEVE:30.47%:NORMAL TREATMENT: 8-10 LB/BBL OF FRACSEAL-COARSE, THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS,1ST PLY 75 LB.NATURAL KRAFT PAPER(INTETIOR PLY)2ND PLY 75 LB.NATURAL KRAFT PAPER 3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY).THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER.THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED OTHER ASSOCIATED LEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

1000824113

Chemicals & Misc.

GUAR GUM: Viscosifier for high salt water

ADDITIVE DRILLING FLUID; CREAMY COLOURED POWDER FORM,PURE GUAR GUM,FOR USED AS COMPETITIVE SUPPLEMENTARY VISCOSIFIER FOR QUICK VISCOSITY SWEEPS BUILDER WHILE DRILLING SURFACE HOLES WITH WATER.,25 KG METAL BAGS,IT IS PARTICULARLY USEFUL FOR OFFSHORE DRILLING, AS IT CAN BE ADDED DIRECTLY TO SEAWATER, , WHICH ELIMINATES THE NEED FOR LARGE QUANTITIES OF FRESH WATER AS WELL AS THE TIME REQUIRED TO PREHYDRATE BENTONITE. IT IS AN UNTREATED GUAR GUM AND IS NON-IONIC IN NATURE. IT SHOWS EXCELLENT PERFORMANCE OVER A WIDE PH RANGE. IT'S RECOMMENDED TO ADD BIOCIDE, IF GUAR GUM SOLUTION KEPT OVER A PERIOD OF TIME. APPEARANCE: CREAMY COLOURED POWDER, ODOR: BEAN LIKE, MOISTURE: 8.0% (MAXIMUM), PH: 8.0, ASH :1% (MAXIMUM), PARTICLE SIZE THROUGH 200 MESH (75 MICRON): 95% (MINIMUM), BROOKFIELD VISCOSITY : 8000 CP (MINIMUM), (1% SOLUTION IN DISTILLED WATER AT 25 DEG. C, AFTER 24 HOURS (SPINDLE #4, 20 RPM), FANN VISCOSITY INITIAL 10 MINUTE: 42 CP (MINIMUM), (2.00 GM / 350 MLS, IN SEA WATER, @ 511 SEC-1, F1 SPRING. SEA WATER: 41.95 GM NACL IN 1000 MLS DISTILLED WATER. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000840600

Chemicals & Misc.

Bag Component

CONTAINER; DISPOSABLE BAG TYPE,SIZE 90 CM X 90 CM X 100 CM,1.5 TON OR 3300 LBS,BARITE,REGULAR BAG SHAPE,TOP STRAP CLOSURE,ORANGE,THE FOUR LIFITNG STRAPS SHOULD EXTEND TO THE FULL BODY OF THE BAGS, REFERENCE TO SAUDI ARAMCO PACKING SPECIFICATIONS MS-8314-11, 1. DIMENSION & WEIGHT: HEIGHT 100 CMS(39"), WIDTH: (90 CMSX 90 CMS) 35" X35", WEIGHT: 2.90 KGS(WITH LINER), VARIANCE ON WEIGHT: 100 GRAMS +/-, LAMINATION:NIL, 2. BODY FABRIC: MATERIAL POLYPROPYLENE, COLOUR: ORANGE, GSM: 200, MESH: 11X12, 3. GENERAL: SAFE WORKING LOAD: 1500 KGS, SAFETY FACTOR: 5:01, 4. PRINTINGL: ONE SIDE ONE COLOUR, 5. SEWING THREAD: COLOUR: WHITE, 6. LIFTING LOOP: CROSS CORNER: FOURLOOPS, LOOP WIDTH: 7.5 CMS, LOOP LENGTH ABOVE THEBAG: 30 CMS, LOOP LENGTH ON THE BAG: 40 CMS, FULL LOOP: AROUND THE BAG, STEVE DORING LOOP: NIL, FILLING ARRANGEMENT: SPOUT DIA: 40CMS (16"), LENGTH OF SPOUT: 50CMS (20"), COLOUR OF SPOUT FABRIC: WHITE, TYPE OF CLOSURE: SIMPLE CLOSURE, DISCHARGE ARRANGEMENT: NO SPOUT AND BOTTOM MUST BE FLAT, LINER SPECIFICATIONS: TYPE OF LINER: PILLOW TYPE LOOSE LINER INSERTED AND FASTENED TO BOTTOM SPOUT, SIZE OF LINER: 190 CMSX 300 CMS, MICRON THICKNESS OF LINER: 120 MICRON MINIMUM, WEIGHT OF LINER: 1200 GRAMS +/- 50 GRAMS, WEIGHT OF BAG INCLUSIVE OF LINER: 2700 GRAMS +/- 100 GRAMS, STRENGTH PARAMETERS: BODY FABRIC: 200 GSM WITH RF (STRENGTH-ABOVE 200KGF), BOTTOM PANEL: 205 GSM (STRENGTH-ABOVE 210KGF), TOP PANEL: 160 GSM (STRENGTH-ABOVE 130KGF), FILLING AND DISCHARGE SPOUT: 75 GSM (STRENGTH-ABOVE 80KGF), LIFTING LOOP: 55G/M (STRENGTH-ABOVE 1950KGF), BODYLOOP: 30G/M (STRENGTH-ABOVE 950KGF), TIE TAPE: 6G/M (STRENGTH-ABOVE 150KGF), SEWING THREAD USEDIN PANEL ATTACHMENT: 3300 DENIER (STRENGTH-ABOVE 20KGF), SEWING THREAD USED IN LOOP ATTACHMENT: (1000 DENIER/2PLAY (STRENGTH-ABOVE 15KGF).

1000843350

Chemicals & Misc.

H2S Scavenger

ADDITIVE DRILLING FLUID; LIQUID FORM, HYDROCARBON, FOR OIL SOLUBLE HYDROGEN SULFIDE SEQUESTERING AGENT/SCAVENGER AQUEOUS SOLUTION MIXTURE OF INORGANIC COMPOUNDS, FOR THE REMOVAL OF H2S IN VARIOUS APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL ROAD TRANSPORTATION, DRILLING MUD, REFINING AND P, PROPRIETARY BLEND OF ZINC COMPOUNDS IN HYDROCARBON BASE, DRUM, APPEARANCE/ODOR: VISCOUS YELLOW TO YELLOW-GREEN LIQUID/MILD ODOR. BOILING POINT: 180 DEG CELSIUS. VAPOR PRESSURE: 0.50 MMHG. SOLUBILITY IN WATER: INSOLUBLE. SPECIFIC GRAVITY: 0.9 (WATER = 1.0). MOLECULAR WEIGHT: PROPRIETARY. PH: 6-7. FLASH POINT (METHOD): >200F. FOR THE REMOVAL OF H2S IN VARIOUS APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL ROAD TRANSPORTATION, DRILLING MUD, REFINING AND PETROCHEMICAL PLANTS, CRUDE OIL SHIPMENTS AND DISPOSAL WELLS.

1000845427

Chemicals & Misc.

Thinner

ADDITIVE DRILLING FLUID; BROWN COLORED POWDER FORM, MODIFIED TANNIN COMPOUND, FOR USED AS MUD CONDITIONER PROVIDING RHEOLOGY CONTROL IN WATER BASE FLUIDS WITH MAXIMUM DEFLOCCULATING AND SHEAR STRENGTH REDUCTION AT LOW CONCENTRATIONS. 25 LB MULTIWALL PAPER BAGS, APPEARANCE: BROWN COLORED POWD, CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000847072

Chemicals & Misc.

HT rheology stabilizer and fluid loss control agent

ADDITIVE DRILLING FLUID; WHITE POWDER FORM,SYNTHETIC POLYMER,FOR CONTROLS HTHP FLUID LOSS IN FRESH, SALTY, OR HARD BRINE FLUIDS. IT INHIBITS SHALE AND STABILIZING FLUID RHEOLOGY. IT CONTROLS WATER LOSS IN ALL ENVIRONMENTS AND REDUCES DIFFERENTIAL STICKING TENDENCIES.,25 LB MULITIWALL PAPER BAG,APPEARANCE : WHITE COLOURED

1000847074

Chemicals & Misc.

Salt

ADDITIVE DRILLING FLUID; FINE CRYSTAL FORM,SODIUM BROMIDE,FOR SODIUM BROMIDE IS AN INORGANIC COMPOUND THAT IS USED TO PREPARE DENSE CLEAR FLUIDS FOR USE IN DRILLING, COMPLETION OR WORK_ GAS WELLS. R OF OIL OR,SODIUM BROMIDE,PP WOVEN BAG WITH PE LINER INSIDE,APPEARANCE: WHITE FINE CRYSTAL,CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000866365

Chemicals & Misc.

Shale Stabilizer

ADDITIVE DRILLING FLUID; POWDER FORM, HIGH-MOLECULAR WEIGHT PARTIALLY-HYDROLYZED POLYACRYLAMIDE (PHPA), IT PROVIDES BOREHOLE STABILITY AND REDUCES FRICTION IN SENSITIVE SHALE SECTIONS. IT ALSO ACTS AS A FILTRATION CONTROL AND INCREASES VISCOSITY IN WATER-BASED DRILLING FLUIDS. PARTIALLY-HYDROLYZED POLYACRYLAMIDE (PHPA), BAG, APPEARANCE: GRANULAR WHITE SOLID POLYMER. SOLUBILITY I, CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000866812

Chemicals & Misc.

Non-conventional LCM

ADDITIVE DRILLING FLUID; POWDER FORM, SPECIAL BLEND OF GRADED SEALING PARTICLES. FOR DESIGNED TO BE EFFECTIVE IN CURING SEVERE TO TOTAL LOSS CIRCULATION IN HIGHLY FRACTURED/VUGULAR OR POROUS CARBONATE FORMATIONS, WITHOUT THE ADDITION OF OTHER CONVENTIONAL LCMS IT CAN BE USED IN ALL TYPES OF DRILLING FLUIDS AND IT IS NOT RECOMMENDED, SPECIAL BLEND OF GRADED SEALING PARTICLES., BAG, APPEARANCE: LIGHT TAN/BROWN SPECIFIC GRAVITY: 0.9 SOLUBILITY IN WATER: INSOLU PH: 6.5-7.5

1000875822

Chemicals & Misc.

ADDITIVE DRILLING FLUID, LIQUID

ADDITIVE DRILLING FLUID; LIQUID FORM, IVE ND OF SURFACE, FOR SPECIAL BLEND OF SURFACE AGENTS ROP ENHANCER, USED IVE IN THE WATER BASE MUD FOR REDUCING TORQUE AND DRAG AND PREVENTING BIT BALLING. NORMAL TREATMENT:1-2% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE IDCAP D, KLA-STOP AND POROSEAL. IVE ND OF SURFACE, 55 GAL/ DRUM, APPEARANCE: YELLOW TO BROWN 0.78- FLASH POINT: > 201¡FLUID SPECIFIC GRAVITY 

1000875823

Chemicals & Misc.

ADDITIVE DRILLING FLUID, LIQUID, POLYAMINE DERIVATIVE

ADDITIVE DRILLING FLUID; LIQUID FORM, POLYAMINE DERIVATIVE, FOR USED FOR SUPPRESSING CLAY SWELLING. IT EFFECTIVELY, INHIBITS SHALE OR GUMBO CLAYS FROM HYDRATING , AND MINIMIZES THE POTENTIAL FOR BIT BALLING. NORMAL TREATMENT: 1-4% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE , IDCAP D, KLA-STOP AND POROSEAL, POLYAMINE DERIVATIVE, DRUM 55 GAL/ DRUM,PH (5% SOLUTION): 9.2-10. FLASH POINT: > 200¡F APPEARANCE: COLORLESS LIQUID CIFIC GRAVITY: 1.03-1.0

1000875824

Chemicals & Misc.

Flocculent & Encapsulated Clay

ADDITIVE DRILLING FLUID; POWDER FORM, DRY ACRYLIC ACID COPOLYMER, FOR ENCAPSULATION COPOLYMER USED TO PROVIDE CUTTINGS, ENCAPSULATION AND CLAY DISPERSION INHIBITION WITH MINIMAL VISCOSITY CONTRIBUTION FOR WATER BASE FLUIDS AND SALINE WATER ENVIRONMENTS. NORMAL TREATMENT: 2-4 LB/BBL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE, DRY ACRYLIC ACID COPOLYMER, BAG 25 KG/SACK, APPEARANCE: WHITE POWDER SPECIFIC GRAVITY: 0.8 PH (1% SOLUTION): 6

1000875825

Chemicals & Misc.

Sealing Polymer

ADDITIVE DRILLING FLUID; LIQUID FORM, STARCH COPOLYMER, FOR PROVIDES PERMEABILITY PLUGGING TO EFFECTIVELY SEAL SHALES AND FILTER CAKES, IMPROVING THE PERFORMANCE OF HIGHLY INHIBITIVE WATER-BASE DRILLING FLUIDS. IT ADDITIVE IS ALSO USED TO PROVIDE SUPPLEMENTAL FLUID LOSS CONTROL IN HIGH-TEMPERATURE APPLICATIONS NORMAL POROSEAL -SHIELD SYSTEM CONSISTS DRILZONE IDCAP D, KLA-STOP ATMENT:2-5% VOL/VOL., STARCH COPOLYMER, 55 GAL/DRUM, APPEARANCE: WHITE LIQUID SPECIFIC GRAVITY: 1.0-1.1 PH (CONC. SOLUTION): 10 

1000876207

Chemicals & Misc.

Hole cleaning agent

ADDITIVE DRILLING FLUID; SOLID FORM, ACRYLIC COPOLYMER BASE, FOR TO PROVIDE VISCOSITY, REDUCE FRICTION, ENCAPSULATE CUTTINGS AND PROVIDE A LIMITE AMOUNT OF FLUID-LOSS CONTROL IN WATER-BASE DRILLING FLUIDS. IT IS A POLYMER STICK THATEASILY ADDED TO THE DRILLSTRING DURING CONNECTIONS AND PROVIDES A CONSISTENT METHOD OF, ACRYLIC COPOLYMER BASE, PAIL, APPEARANCE: TUBE FILLED WI STICK SPECIFIC GRAVITY: 1.0 SOLUBILITY SOLUBLE IN WATER SIZE: 1-1/4 X 15 IN., ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000876985

Chemicals & Misc.

Non-damaging LCM

ADMIXTURE DRILLING MUD; ADMIXTURE FORM,BLEND OF SIZED CACO3 AND POLYMERS,FOR REDUCES FLUID INVASION WITHOUT DAMAGING THE FORMATION BY SEALING GAUGE SCREEN FROM INTERNAL SIDE TO BE EASILY REMOVED WITH PRODUCTION FLUID FLOW.,BLEND OF SIZED CACO3 AND POLYMERS,BBL,CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000877296

Chemicals & Misc.

SBP-24 DEFOAMER,

AGENT WELL STIMULANT; FOR TO CONTROL FOAMING IN SPACER OR CLEANING FLUID FORMULATIONS TYPICALLY TREATMENT: 100-500 PPM. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT SBP-4620 SURFACTANT, SBP-9125 SURFACTANT, SBP-9755 SURFACTANT SBP-600,SILICONE EMULSION BASE,LIQUID FORM,PAIL,APPEARANCE: WHITE CREAMY SPECIFIC GRAVITY: 0.99 PH: 7-8,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000877297

Chemicals & Misc.

SBP-85 GEL-EÊ liquid viscosifier

AGENT WELL STIMULANT; FOR NON-DAMAGING VISCOSIFIER THAT READILY DISPERSIBLE IN ALL BRINE SYSTEMS AND EASIER TO USE THAN DRY VISCOSIFIERS . IT IS SOLUBLE IN HYDROCHLORIC, ACETIC AND FORMIC ACIDS AND DEGRADABLE AT TEMPERATURES ABOVE 275¡F,BLEND OF XANTHAN GUM/ORGANIC SOLVENT,LIQUID FORM,PAIL,APPEARANCE: BEIGE COLORED SPECIFIC GRAVITY: 1.07 PH: 7 FLASH POINT: 160 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000877298

Chemicals & Misc.

SBP-600 BIOCIDE

AGENT WELL STIMULANT; FOR TO CONTROL ALL FORMS OF BACTERIA WHICH IS PARTICULARLY DETRIMENTAL IN FRESH AND BRINE-WATER DRILLING AND PACKER FLUIDS TYPICAL TREATMENT: 5 GAL/100 BBL. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP 4620,BLENDED ORGANIC SULFUR ANTIMICROBIAL AGENT,POWDER FORM,PAIL,APPEARANCE: WHITE CRYSTAL SPECIFIC GRAVITY: 0.96,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000877299

Chemicals & Misc.

SBP-SPACER MIX, viscosity agent

AGENT WELL STIMULANT; FOR TO DEVELOP THE VISCOSITY AND GELLING AND TO BE EASILY HYDRATED EVEN UNDER A LIMITED MIXING CONDITION. ALSO, IT ENHANCES THE HIGH TEMPERATURE VISCOSITY PERFORMANCE IN SOLID-FREE POLYMER GEL.TYPICAL TREATMENT: 8-25 LB/BBL. SPACER-TEK SYSTEM CONSISTS OF,PATENTED BLEND OF VISCOSIFIERS AND DISPERSANT,POWDER FORM, BAG,APPEARANCE: BEIGE-COLORED P S.G.: 1.76,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000877460

Chemicals & Misc.

SBP-101 cleaning solvent

AGENT WELL STIMULANT; FOR USED AS THE PRIMARY CLEANING PILL FOR DISPLACEMENT CLEANUP OF SYNTHETIC AND OIL-BASED DRILLING MUD. THE SOLVENT PRODUCT IS TYPICALLY MIXED WITH BRINE TO PROVIDE DISPERSED MACRO DROPLETS OF SOLVENT IN BRINE AND ALSO A HIGHER SOLVENT PILL DENSITY FOR SUPER, BLENDS OF SURFACTANTS AND SOLVENTS,LIQUID FORM, DRUM, APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.85-0.87 PLASH POINT: 122 F,++ CONTAINER MUST BE PROPERLY LABELED WITH,VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000877461

Chemicals & Misc.

SBP-4620 cleaning surfactants

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE OF TEMPERATURES SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125 SURFACTANT SBP,BLEND OF NON-IONIC SURFACTANTS AND LINEAR ALCOHOL CO-SOLVENT,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.002 PH: 7-8 PLASH POINT: > 200 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000877462

Chemicals & Misc.

SBP-9125 , cleaning surfactants

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD SURFACTANT WITH LOWER HLB NUMBER FOR LOWER TEMPERATURE CLEANING APPLICATION SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP,ETHOXYLATED ALCOHOL BASE,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.92 PH: 7-8 PLASH POINT: 255 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000877463

Chemicals & Misc.

SBP-9755 cleaning SURFACTANT

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE OF TEMPERATURES. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER ,SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125 SURFACTANTS,ALKYL POLYGLUCOSIDE BASE,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.1 PH: 7-8 PLASH POINT: 212 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000881942

Chemicals & Misc.

(EZ Squeeze), non-conventional LCM

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE,FOR HIGH FLUID LOSS LCM FORMS A RAPID SOLID PLUG AGAINST LOSS ZONE WHEN LIQUID PHASE IS SQUEEZE FROM SLURRY IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF WATER/OIL BASED MUDS.,MIXTURE,BAG,APPEARANCE: OFF-WHITE TO GA BULK DENSITY: 41-46 LB/CU PH: 11.5-12.8,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000881943

Chemicals & Misc.

Swellcm , Gelled swelling sealing LCM

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE OF POLYSACCHARIDES,FOR SWELLING/SEALING AGENT USED TO FILL FRACTURES AND VOIDS BY CREATING A SOLID INNER MATRIX SEAL IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF WATER/OIL BASED MUDS. USUALLY PUMPED AHEAD OF EZ-SQUEEZE OR CEMENT JOB AND IT HAS A GOOD SOLUBILITY IN ACID,MIXTURE OF POLYSACCHARIDES,PAIL,APPEARANCE: LIGHT TAN TO OF BULK DENSITY: 35-55 BA/CU,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000883084

Chemicals & Misc.

Well Bore Strengthing and fluid loss control agent

ADDITIVE DRILLING FLUID; POWDER FORM,BLEND OF MODIFIED POLYMERS,FOR PROVIDES CENTRAL TO THE ULTRA-LOW INVASIVE FLUID AND GREATLY REDUCES FLUID INVASION INTO MATRIX. TYPICAL TREATMENT: 3- 8 LB/BBL.,BLEND OF MODIFIED POLYMERS,25 POUND MULTI-WALLED SACKS,APPEARANCE: POWDER TO FLAKE. SPECIFIC GRAVITY: 1.0. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000885304

Chemicals & Misc.

OBM Lubricant

ADDITIVE DRILLING FLUID; LIQUID FORM,MIXTURE OF FATTY ACIDS AND SPECIALTIES, FOR DRILLING LUBE IS USED TO HELP IMPROVE LUBRICITY OF OIL-BASED MUD SYSTEMS, THEREBY HELPING TO REDUCE TORQUE AND DRAG, AND REDUCING RISK OF DIFFERENTIAL STICKING IN DEEP, TORTUOUS, HIGH ANGLE OR EXTENDED REACH WELLS, MIXTURE, 55-GALLON (208 LITRE) DRUM,APPEARANCE: AMBER LIQUID.

1000888050

Chemicals & Misc.

Glass Filler, weighting agent

ADDITIVE DRILLING FLUID; SOLID (PULVERIZED POWDER) FORM, GLASS BEADS, FOR IT IS CHEMICALLY INERT WEIGHTING MATERIAL FOR LOW DENSITY FLUIDS. IT IS USED IN LCM SYSTEM. IT IS STABLE AT TEMPERATURES UP TO 1112 ¡F., GLASS BEADS, BAG, APPEARANCE: SOLID CLEAR AND ODORLESS. SG1: 0

1000888051

Chemicals & Misc.

Resin for high temperature (> 95 C)

ADDITIVE DRILLING FLUID; LIQUID FORM, POLYESTER RESIN BASE, FOR THERMALLY ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS. POLYESTER RESIN BASE, IBC, APPEARANCE: YELLOW LIQUID. DEN, WORKING TEMPERATURE RANGE IS 212 ¡F - 302 ¡F FOR HIGH TEMPERATURE APPLICATIONS. THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS FILLER.

1000888052

Chemicals & Misc.

Thermaset 55-4, Resine for low temperature (< 95 C)

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS.,POLYESTER RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING TEMPERATURE RANGE IS 140 ¡F - 275 ¡F FOR LOW TEMPERATURE APPLICATIONS. THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS FILLER. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTIONDATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000888053

Chemicals & Misc.

Silicate viscosifier

ADDITIVE DRILLING FLUID; SOLID FORM, SILICON DIOXIDE, FOR SPECIAL VISCOSIFIER FOR LCM SYSTEM. IT CAN BE USED IN TEMPERATURE RANGE OF 32 ¡F - 1112 ¡F., SILICON DIOXIDE, BAG, APPEARANCE: SOLID ODORLESS. SG: 2.2

1000888054

Chemicals & Misc.

Curing Initiator (> 95 C)

ADDITIVE DRILLING FLUID; LIQUID FORM, TERT-BUTYL PERBENZOATE, FOR CURING AGENT (ACCELERATOR) FOR LCM SYSTEM FOR HIGH TEMPERATURE APPLICATIONS (205 ¡F - 266 ¡F), TERTIARY-BUTYL PEROXYBENZOATE, CAN, APPEARANCE: LIQUID. DENSITY: 1 

1000888055

Chemicals & Misc.

Curing Initiator (< 95 C)

ADDITIVE DRILLING FLUID; LIQUID DISPERSION FORM, DIBENZOYL PEROXIDE, FOR CURING AGENT (ACCELERATOR) FOR LCM SYSTEM FOR LOW TEMPERATURE APPLICATIONS (32 ¡F # 205 ¡F), DIBENZOYL PEROXIDE / C 9-11 BRANCHED ALKYLBENZOATE, CAN, APPEARANCE: LIQUID. COLOR: WHI 

1000888056

Chemicals & Misc.

Solvent for equipment cleaning

ADDITIVE DRILLING FLUID; LIQUID FORM, DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL ADIPATE, FOR IT IS A CLEANING AGENT USED IN SYSTEM APPLICATIONS TO CLEAN OILY AREAS IN TANKS, PIPES, ETC., DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL ADIPATE, IBC, APPEARANCE: LIQUID. COLOR: LIG

1000892842

Chemicals & Misc.

pH control agent and viscosity enhancer

ADDITIVE DRILLING FLUID; SOLID FORM, FINE PARTICLE-SIZE MAGNESIUM COMPOUND, FOR CONTROLS THE PH OF BRINE-BASED AQUEOUS DRILLING FLUID SYSTEMS MIXED IN ZINC BROMIDE, CALCIUM CHLORIDE, MINIMUM PERCENTAGE AS MGO: 98, A 25 KG MULTI-WALLED SACK, PHYSICAL PROPERTIES: APPEARANCE, ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).

1000892844

Chemicals & Misc.

Viscosifier

ADDITIVE DRILLING FLUID; LIQUID FORM, DIETHYLENE GLYCOL, FOR A VISCOSITY ENHANCER AND STABILIZER IN DRLG FLUID SYSTEMS MIXED IN CALCIUM CHLORIDE. IT REDUCES VISCOSITY IF CONCENTRATION EXCEEDS 1.0 % BY VOLUME. DIETHYLENE GLYCOL: 100% PURITY, 7.6 LITERS CAN, PHYSICAL AND CHEMICAL PROPERTIES, ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE IN CANS (1 CAN = 7.6 LITERS). 

1000892845

Chemicals & Misc.

Fluid loss control

ADDITIVE DRILLING FLUID; SOLID FORM, SPECIAL BRANCHED CHAIN MODIFIED STARCH DERIVATIVE, FOR PROVIDES BOTH VISCOSITY AND FLUID LOSS CONTROL IN DRILLING FLUID SYSTEM MIXED IN CALCIUM CHLORIDE. HIGH MOLECULAR WEIGHT, BRANCHED-CHAIN STARCH DERIVATIVE, A 25 KG MULTI-WALLED SACK, TYPICAL PHYSICAL AND CHEMICAL, ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).

1000903745

Chemicals & Misc.

Cement spacer system

ADDITIVE DRILLING FLUID; LIQUID FORM,ANTI-FOAMER FOR IN-HOUSE CEMENT SPACER SYSTEM,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER SYSTEM FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE MUD SYSTEMS DESIGNED TO PREVENT AIR-ENTRAPMENT AND USED DURING MIXING TO PROVIDE AN ACCURATE FLUID WEIGHT. THIS ANTI-FOAMER IS USED IN COMBINATION LOSURF-259(SAP# 1000811529 A SYSTEM TO FORMULATE ENT SPACER DESIGNS FOR USE TIFICATE . TIFICATE OF ORIGIN COO IDS PACKAGED IN A 5 GALLON -ANALYSIS (COA) AND STIC PAIL .VENDER TO SUBMIT COSIFIER (SAP# 1000903746) H DIACEL¨ ADJUSTABLE SPACER H NON -AQUEOUS DRILLING,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE CEMENT SPACER,PAIL,APPEARANCE: VISCOUS WHITE SPECIFIC GRAVITY = 1.00 G BOILING POINT > 35 C (>95F VISCOSITY: 10000 CST FLASHPOINT: > 101.1¡C (>21,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, 

1000903746

Chemicals & Misc.

Cement spacer system

ADDITIVE DRILLING FLUID; GREY POWDER FORM,VISCOSIFIER FOR IN-HOUSE CEMENT SPACER SYSTEM,,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER SYSTEM FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE MUD SYSTEMS DESIGNED TO PROVIDE FLUID LOSS CONTROL AND VISCOSITY ALLOWING USERS TO EASILY FORMULATE A CEMENT SPACER WITH THE DESIRED RHEOLOGY CERTIFICATE OF ORIGIN COO DENSITY THIS VISCOSIFIER I LOSURF-259 SAP #1000811529 A SYSTEM TO FORMULATE -S SAP # 1000903745 ENT SPACER DESIGNS FOR IDS PACKAGED IN 50-LB COMBINATION WITH DIACEL¨ TIWALL WATER RESISTANT BAGS ANALYSIS (COA) WITH NON-AQUEOUS DRILLING DER TO SUBMIT CERTIFICATE,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE CEMENT SPACER SYSTEM,BAG,APPEARANCE: OFF-WHITE POWDE SPECIFIC GRAVITY: 2.08 G/M TEMPERATURE: 40¡F - 400¡F CONCENTRATION: 2-22 LBS/BB,#++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000904194

Chemicals & Misc.

LE SUPERMUL, emulsifier

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER FOR INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A LIQUID PRIMARY EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: CLEAR AMBER VISCOU,REQUIRED QTY: 55 GAL PER DRUM. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURE'S NAME, LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S.PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES EMUSLSION STABILITY,PROMOTES OIL-WETTING AND FILTRATION CONTROL VENDER TO SUBMIT CERTIFICATE OF ANALYSIS(COA) AND CERTIFICATE OF ORIGIN (COO). A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2,6 RPM READING GREATER THAN 8 AND 3 RPMREADING GREATERTHAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000904195

Chemicals & Misc.

FACTANT, fluid loss control

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER AND WETTING AGENT FOR INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A LIQUID EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: DARK VISCOUS LIQUI,REQUIRED QTY: 55 GAL PER DRUM. CONTAINER MUST BE PROPERLY LABELED WITH: VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.MATERIAL IMPROVES EMULSION STABILITY AND HELPS TO CONTROL HTHP FILTRATION IN INVERT EMULSION DRILLING FLUIDS. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2,6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000904196

Chemicals & Misc.

BDF-513, fluid loss control

ADDITIVE DRILLING FLUID; SOLID FORM,CROSS-LINKED POLYMER SOLID,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A CROSS-LINKED POLYMER SOLID THAT PROVIDES FILTRATION CONTROL FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BARO,A CROSS-LINK POLYMER SOLID,BAG,APPEARANCE: SOLID. SPECIFIC GR,REQUIRED QTY: 25 KG PER BAG. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. IT ALSO PROVIDES SECONDARY VISCOSITY AND IS BEST SUITABLE FOR LOW SOLVENCY BASE OILS. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2, 6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000904197

Chemicals & Misc.

BDF-489, viscosifier

ADDITIVE DRILLING FLUID; SOLID FORM,ORGANIC BASED VISCOSIFER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. AN ORGANIC BASED RHEOLOGY MODIFIER FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BAROID.,ORGANIC BASED VISCOSIFIER,25 KG BAG,APPEARANCE: SOLID WHITE. MELTING POINT: 55,REQUIRED QTY: 25 KG PER BAG. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES LOW SHEAR RHEOLOGY. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2, 6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000904198

Chemicals & Misc.

ADAPTA, fluid loss control

ADDITIVE DRILLING FLUID; SOLID FORM,METHYLSTYRENE ACRYLATE COPOLYMER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. PRIMARY FILTRATION CONTROL AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BAROID.,METHYLSTYRENE ACRYLATE COPOLYMER,25 KG BAG,APPEARANCE: SOLID WHITE. SPECIFIC GRAVITY :,REQUIRED QTY: 25 KG PER BAG. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES SECONDARY VISCOSITY AS WELL. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 1 LB/BBL LIME, 4 LB/BBL ADAPTA, 10 LB/BBL BDF-489 VISCOIFIER, 20 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16HOURS DYNAMIC HEAT AGEING AT 275 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 250 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 275 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 25 LB/100FT2, 6 RPM READING GREATER THAN 10 AND 3 RPM READING GREATER THAN 9 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000904199

Chemicals & Misc.

RHEOMOD-L, viscosifier

ADDITIVE DRILLING FLUID; LIQUID FORM,MODIFIED TRIMER FATTY ACID,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. LIQUID POLYMERIC VISCOSIFIER AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BAROID.,MODIFIED TRIMER FATTY ACID,55 GAL DRUM,APPEARANCE: LIQUID DARK. SPECIFIC GRAVITY : 0,REQUIRED QTY: 55 GAL PER DRUM. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES LOW SHEAR RATE RHEOLOGY AND IMPROVE FLAT GEL PROPERTY FOR DEEPWATER WELL DRILLING. IT PROVIDES SECONDARY EMULSION STABILITY AS WELL. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2, 6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000904472

Chemicals & Misc.

Rheology modifier

ADDITIVE DRILLING FLUID; LIQUID FORM, ANIONIC SYNTHETIC POLYMER IN EMULSION FORM, FOR A LIQUID POLYMERIC PREMIER VISCOSIFIER WHICH HELPS TO IMPROVE THE RHEOLOGICAL AND SUSPENSION CHARACTERISTIC OF LOW TOXICITY MINERAL OIL AND SYNTHETIC OIL-BASED DRILLING FLUIDS OR IN DIESEL OIL-BASED MUD. IT HELPS INCREASE PRIMARILY LOW SHEAR RHEOLOGICAL, ANIONIC SYNTHETIC POLYMER IN EMULSION FORM, DRUM, PHYSICAL PROPERTIES: APPEAR BOILING POINT: ~ 100 OC MELT/FREEZE POINT: -12 OC PH VALUE CONC. SOLN: 2 # 5 FLASH PO, PARAMETERS VALUE #FANN-35 F1 SPRING 6 RPM READING @ 120 OF EQUAL OR GREATER THAN 9 #FANN-35 F1 SPRING 3 RPM READING @ 120 OF EQUAL OR GREATER THAN 8# LOW SHEAR YIELD POINT LSYP @120 OF EQUAL OR GREATER THAN 7#

1000905195

Chemicals & Misc.

Wellbore cleanup

ADDITIVE DRILLING FLUID; LIQUID FORM,ORGANIC ESTERS,FOR A LIQUID ORGANIC ACID PRECURSOR WHICH WILL GENERATE ORGANIC ACID IN#SITU DOWNHOLE WHICH HAS THE CAPABILITY TO DISSOLVE CALCIUM CARBONATE FILTER CAKE SOLIDS TO REMOVE FORMATION DAMAGE DUE TO CARBONATE SOLIDS PLUGGING,55 GAL PER DRUM,A PROPRIETARY BLEND OF ORGANIC ESTERS,PHYSICAL PROPERTIES:APPEARANCE,#CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.##A LIQUID ORGANIC ACID PERCURSOR WHICH WILL GENERATE ORGANIC ACID IN-SITU DOWNHOLE WHICH HAS THE CAPAVILITY TO DISSOLVE CALCIUM CARBONATE FILTER CAKE SOLIDS TO REMOVE FORMATION DAMAGE DUE TO CARBONATE SOLIDS PLUGGING. IT IS TO BE USED TOGETER WITH ORCA-4 WATER-WETTING SURFCTANT IN THE PREPARATION OF THE PROPRIETARY MUDWASH FILTER-CAKE BREAKER SYSTEM FOR OBM WELLBORE CLEAN-UP. VENDOR TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 210 KG (55 GAL) THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000905196

Chemicals & Misc.

Wellbore cleanup

ADDITIVE DRILLING FLUID; LIQUID FORM,WATER WETTING SURFACTANTS,FOR A LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE PREPARATION OF WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABILITY OF THE FILTER CAKE SOLIDS FROM OIL-WET TO WATER # WET.,A WATER-WETTING SURFACTANT MIXTURE,55 GAL PER DRUM,PHYSICAL PROPERTIES : APPEARAN,#CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.####A LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE PREPARATION OF WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABLITY OF THE FILTER CAKE SOLIDS FROM OIL-WET TO WATER-WET. IT IS TO BE USED TOGETHER WITH ORCA-B THE ACID PRECURSOR IN THE PREPARATION OF THE PROPRIETARY MUDWASH FILTER CAKE BRAKER SYSTEM FOR OBM WELLBORE CLEAN-UP. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 200 KG (55 GAL). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000908458

Chemicals & Misc.

BaraZan D plus:Viscosifier / suspension agent

ADDITIVE DRILLING FLUID; POWDER FORM,VISCOSIFIER / SUSPENSION AGENT (POLYSACCHARIDE),FOR FRESH WATER, SEA WATER AND BRINE,DISPERSANT-ADDED BIOPOLYMER (XANTHAN GUM),BAG (ONE BAG = 55 LBS),APPEARANCE: YELLOW TO WHITE PO,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. IT IS A BIOPOLYMER XANTHAN GUM USED TO HELP TO DISPERSE EASILY, AND TO PROVIDE VISCOSITY AND SUSPENSION IN FRESH WATER, SEA WATER AND IN BRINES, AS SODIUM AND POTASSIUM BROMIDES AND SODIUM AND POTASSIUM CHLORIDES. IT IS STABLE AT 250 DEG F (121 DEG C). TYPICAL TREATMENT OF 0.1-2 LB/BBL (0.3-5.7 KG/ CUBIC M) AS NEEDED TO OBTAIN THE DESIRED VISCOSITY. THE UNIT IS 55 LBS (25 KG)/BAG. IT IS PART OF A NON-DAMAGING SYSTEM RDF-615, WHICH CONTAINS BARABRINE DEFOAM, BARA CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580). SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000908459

Chemicals & Misc.

Oxygon: corrosion inhibitor

ADDITIVE DRILLING FLUID; POWDER FORM, ORGANIC ACID SALT (OXYGEN SCAVENGER), FOR FRESH WATER, WATER BASED MUD (WBM) AND MONO OR DIVALENT BRINES, GRANULAR ERYTHORBATE MATERIAL, PAIL (ONE PAIL = 55 LBS), APPEARANCE: WHITE GRANULAR POW, ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. IT IS USED AS A CORROSION INHIBITOR OR OXYGEN SCAVENGER IN WBM, WATER AND IN MONO OR DIVALENT BRINES/COMPLETION FLUIDS. THE UNIT IS 55 LBS (25 KG)/PAIL. IT IS PART OF THE NON-DAMAGING SYSTEM - RDF -615 SYSTEM WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, BARA CARB 150, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580). TYPICAL TREATMENT OF 0.1 LB/BBL. BASE THE TREATMENT OF CIRCULATING FLUIDS ON OXYGEN CONTENT. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OFANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000908534

Chemicals & Misc.

Barabrine : Defoamer

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF NONIONIC SURFACTANTS,FOR NON-DAMAGING FLUIDS RDF-615 AND NON-RESERVOIR WBM AND BRINES, INCLUDING ZNBR2,BLEND OF NONIONIC SURFACTANTS,PAIL (ONE PAIL = 5 GALLONS),APPEARANCE: COLORLESS CLEAR LI,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. THIS DEFOAMER IS USED AS PART OF THE NON-DAMAGING FLUIDS RDF-615, WHICH INCLUDES BARAZAN D PLUS, BARA CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBEGOLD SEAL (MM: 1000757580). TYPICAL TREATMENT IS 0.05-0.25 LB/BBL (0.007-0.033 GAL/BBL). THIS DEFOAMER CAN ALSO BE USED IN NON-RESERVOIR WATER BASED MUDS AND BRINES, INCLUDING ZNBR2. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000908535

Chemicals & Misc.

BaraCarb 150: weighting material, bridging material, LCM

ADDITIVE DRILLING FLUID; POWDER OR GRANULES FORM,SIZED CALCIUM CARBONATE (CACO3) MARBLE QUALITY,FOR WATER BASED MUD (WBM), OIL BASED MUD (OBM) AND BRINE,CALCIUM CARBONATE (CACO3) MARBLE QUALITY.,BAG (ONE BAG = 55 LBS),APPEARANCE: WHITE POWDER OR GR,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. SIZED MARBLE CALCIUM CARBONATE (D50 = 150 MICRONS) USED TO INCREASE DENSITY IN WBM AND OBM FOR RESERVOIR APPLICATIONS AND BRINES AND AS A BRIDGING AGENT FOR FLUID LOSS CONTROL AND SEALING/LCM IN NON - DAMAGING SYSTEMS. THE UNIT IS 55 LBS (25 KG) / BAG. IT IS PART OF THE RDF -615 WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580). SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

1000908540

Chemicals & Misc.

Wellbore cleanup

ADDITIVE DRILLING FLUID; LIQUID FORM,ENZYME PROTEIN,FOR FILTER CAKE REMOVAL FOR WATER BASED MUD AND BRIDGING PARTICLES PRESENT IN THE CAKE, REMOVING THE NEAR-WELLBORE DAMAGE,ENZYME PROTEIN,DRUM (ONE DRUM = 55 GALLONS),APPEARANCE: LIGHT BROWN LIQUID,ADDITIVE FOR DRILLING FLUID. IT IS A FILTER CAKE REMOVAL FOR WATER BASED MUD WHICH BREAKS DOWN THE STARCH POLYMERS PRESENT IN THE MUD FILTER CAKE BREAKING ITS INTEGRITY AND ENABLE MORE EFFICIENT ACIDIZING TREATMENT OF ACID-SOLUBLE DRILL SOLIDS AND BRIDGING PARTICLES PRESENT IN THE CAKE, REMOVING THE NEAR-WELLBORE DAMAGE. TYPICAL TREATMENT IS 5 - 6% V/V. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURERS NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000908544

Chemicals & Misc.

Low Toxicity Mineral Oil

ADDITIVE DRILLING FLUID; CLEAR LIQUID FORM,CLEAN NATURAL GAS ORIGIN, FOR IT IS LOW TOXICITY MINERAL OIL USE AS BASE OIL FOR FORMULATING OIL-BASED DRILLING FLUID IT IS COMPATIBLE WITH ALL OIL BASED DRILLING FLUIDS ADDITIVES. IT IS COMPARABLE WITH LOW TOXICITY MINERAL OIL AND TS SPECIFICATION OF # 1000022138 AS STATED BELOW, A MIXTURE OF ALKANES. CLEAR AND ODORLESS PARAFFIN OIL, GALLON, TM D1319) TM D611) TM D93) LYSIS (COA) AND LINE POINT: MORE THAN 75 DE HORIZED ZENE CONTENT: NIL PPM ASSAY TEST): > 100,000 PPM. RY OUT CERTIFICATE OF ORIGIN (COO). SH POINT: MORE THAN 85 DEG 50 (MYSID SHRIMP 96-HR : 0.77-0.97 (ASTM D1298) FINS CONTENT: NIL PPM KAGING AS PER SAUDI ARAMCO YNUCLEAR AROMATIC: NIL PPM PLING AND TESTING AS NEEDED DI ARAMCO PERSONNEL WILL CIFIC GRAVITY AT 15 OC : PLIER/VENDOR IS REQUIRED SUBMIT LAB CERTIFICATE OF AL AROMATIC: LESS THAN 0.5, #CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN SHOULD BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000908546

Chemicals & Misc.

TAU MOD, Viscosifier/Suspension Agent

ADDITIVE DRILLING FLUID;POWDER FORM,CYRISTALLINE SILICA & SEPIOLITE,FOR A HIGH TEMP VISCOSIFER, ONE OF THE COMPONENT OF CLAY FREE OIL-BASED DRILLING FLUID SYSTEMS OF HALLIBURTON # BAROID INNOVERT (LOW TOXICITY MINERAL OIL BASE)&INTEGRADE (DIESEL BASE).IT IMPROVES LOW SHEAR RHEOLOGY &HELPS TO EXTEND CO-POLYMERS LLING FLUIDS IN LONG TERM CLAY FREE OIL-BASED PENSION OF SOLIDS & GHTING AGENTS, CYRISTALLINE SILICA &SEPIOLITE,50 LB BAG,A) & CERTIFICATE OF HOURS DYNAMIC LB/BBL TAU MOD, 40 B/BBL FACTANT, 2LB/BBL LS @ 300PM READING T 120 DEGREE F. TANDARD LABORATORY IXTURE MINERAL OIL EARANCE: POWDER. PINK TO PER SAUDI ARAMCO STANDARDS TIFICATE OF ANALYSIS REE F &500PSI PRESSURE TRICAL STABILITY GREATER HOULD HAVE ATER THAN 23LB/100FT2, ATER THAN 9 & 3 RPM YISH TAN. T AGEING AT 380 DEGREE P FILTRATE LOSS LESS THAN ERT EMULSION MUD PREPARED BBL MARBLE FINE WITH E, 5.0LB/BBL BDF-513 FLUID S CONTROL, 3LB/BBL 80PCF WITH BARITE AFTER ORIGIN (COO)/WATER RATIO 70/30, KAGING FORMANCE PROPERTIES SICAL PROPERTIES: AND DENSITY DING GREATER THAN OMOD-L VISCOSIFER CIFIC GRAVITY: 1.9 # 2.4 BLE UP TO 400 DEGREES F. PLIER/VENDOR IS REQUIRED N 300 VOLTS, SUBMIT LAB ER PHASE SALINITY 250,000 H 15LB/BBL LE SUPERMUL LD POINT, PHYSICAL PROPERTIES: APPEARANCE: POWDER. PINK TO GREYISH TAN. SPECIFIC GRAVITY : 1.9 # 2.4 STABLE UP TO 400 DEGREES F.PERFORMANCE PROPERTIES A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 15 LB/BBL LE SUPERMUL, 4LB/BBL FACTANT, 2LB/BBL LIME, 5.0LB/BBL BDF-513 FLUID LOSS CONTROL, 3 LB/BBL RHEOMOD-L VISCOSIFER, 2.5 LB/BBL TAU MOD, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 380 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 23 LB/100FT2, 6RPM READING GREATER THAN 9 AND 3RPM READING GREATER THAN 8 AT 120 DEGREE F. 

ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND

Chemicals & Misc.

PRIME-760, blend surfactants de-emulsifier & water wetting agent

ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND SURFACTANTS,FOR USED TO CREATE AN EFFECTIVE PUSH PILL TO PILOT THE DISPLACEMENT AND ACT AS NON EMULSIFIER,2-BUTOXYETHANOL > 60% AND A BLEND OF UNSATURATED AROMATIC HYDROCARBONS, NON-IONIC SURFACTANT AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE CLEAR,`LIGHT YELLOW LIQUID, ODOR MILD, SWEET SPECIFIC GRAVITY:920 KG/M3 FLASH POINT 64¡C(PMCC),PH 4.7-5.7(75%IPA/25% WATER), SOLUBLE IN WATER, VISCOSITY: 95-105 CPS AT 20 DEG C ++ USED FOR REMOVING OIL-WET DEBRIS FROM THE METAL SURFACES, FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED DRILLING FLUIDS.ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED CONTAINER MUST BE PROPERLY LABELED ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000813535

Chemicals & Misc.

CaCO3 FLAKES Coarse

ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE 60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99% MIN ++

1000813534

Chemicals & Misc.

CaCO3 FLAKES Fine

ADMIXTURE DRILLING MUD; FINE WHITE FLAKES FORM,SIZED CALCIUM CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE 60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99% MIN, ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. 

1000813690

Chemicals & Misc.

CaCO3 FLAKES Med.

ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE 60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99% MIN ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. 

1000775562

Chemicals & Misc.

Clay Sync: a Clay inhibitor

ADMIXTURE DRILLING MUD; GRANULES FORM, NON-IONIC 100% ACTIVE DRYPOLYMER, FOR A CLAY INHIBITOR FOR WATER BASED DRILLING FLUIDS.SHALE STABILIZER AND WELLBORE LUBRICATOR,LOW MOLECULAR WEIGHT, NON-IONIC DRY POLYMER, 50 LB. BAG, POLYMER ADHERES TO SURFACE OFREACTIVE CLAYS PREVENTING DISPERSION AND HYDRATION, SHOULD BEMIXED THROUGH THE HOPPER IN THE HYDRO-GUARD SYSTEM. IF SALINITY >140,000 PPM USE 2 LB/BBL, IF SALINITY IS<140,000 PPM, USE 3LB/BBL OFF-WHITE GRANULES, SOLID, ODORLESS, PH (1% SOLUTION): 6.5-7.5 , SG 1.04, 100 (%ACTIVE POLYMER), BULK DENSITY 50 LB/FT3@ 20OC, SOLUBLE IN WATER

1000813125

Chemicals & Misc.

COASTAL SPOT

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF POLYALPHAOLEFIN ( PAO) SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS,FOR SPOTTING FLUID FOR FREEING STUCK PIPE,PAO BASED PRODUCT WITH PATENTED ADDITIVES,275 GALLON IBC CONTAINER,ADDITIVE, DRILLING FLUID: LIQUID, BLEND OF POLYALPHAOLEFIN (PAO) SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS, SPOTTING FLUID FOR FREEING STUCK PIPE, PAO BASED PRODUCT WITH PATENTED ADDITIVES, 275 GALLON IBC CONTAINER,CLEAR YELLOW LIQUID: SG:0.95-1. 05: DISPERSIBLE IN WATER: POUR POINT: -20 DEG F, FLASH POINT GREATER 300 DEG F: REPLACEMENT FOR DIESEL AND MINERAL OIL BASED SPOTTING FLUIDS: DEHYDRATES AND CRACKS FILTER CAKE TO ALLOW PENETRATION AROUND THE PIPE WITH PAO TO FREE STUCK PIPE ++ CONTAINER MUST BE PROPERLY LABELED WITH: VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCT

1000720918

Chemicals & Misc.

Drilling Beads for lubrication

ADMIXTURE: DRILLING MUD; DRY, LUBRA-GLIDE BEADS; DIVINYL BENZENE COPOLYMER; DRY, COARSE GRADE; FOR REDUCING TORQUE AND DRAG. ADMIXTURE DRILLING MUD; DRY, COARSE FORM,DIVINYL BENZENE COPOLYMER BEAD,FOR SOLID LUBRICANT, TO REDUCE TORQUE AND DRAG WHILE DRILLING,22.7 KG (50 LB) SACK,AF BATCH NO. AND STOCK NO.,TEMPERATURE RANGE, UP TO 450 DEGREE F.

1000820609

Chemicals & Misc.

EC-101(CUTTING WASH)

ADDITIVE DRILLING FLUID; AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC COMPOUNDS AND ENZYMES,FOR A NON-TOXIC ,NON- HAZARDOUS,NON-FLAMMABLE NON-CORROSIVE,100% BIODEGRADABLE,WATER BASED PRODUCT WHICH IS UTILIZED IN BUT NOT LIMITED TO THE FOLLOWING APPLICATION,DRILL CUTTING DECONTAMINATION, TREATMENT AND DISPOSAL, HYDROCARBON CONTAMINATED SOLIDS TREATMENT AND DE- OILING OPERATION ON ONSHORE AND OFFSHORE OIL DRILLING RIGS,PRODUCTION PLLATFORMS AND VESSELS , OIL SPILL CLEANUP OPERATION AND PROCESS PLANT CLEAN UP . THE PRODUCT LEAVES NO PETROCHEMICAL DISTILLATES AFTER PROPER TREATMENT,APPEARANCE: MEDIUM BLUE AQUEOUS SOLUTION, SPECIFIC GRAVITY: 1.2 - 1.4 (WATER=1), PH: 7 - 9 POUR POINT : 26 DEG F FREEZE POINT: 26 ¡F SOLUBILITY : FRESH AND BRINE WATER,55-GAL DRUM,++

1000813531

Chemicals & Misc.

EC-103 (EMULSION BREAKER)

ADDITIVE DRILLING FLUID; LIQUID AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC NOMINAL PIPE SIZE: 5-1/8 IN,FOR EMULSION BREAKER, BREAKS DOWN CRUDE FOR THE SEPARATION OF BOTH OIL AND SOLIDS,ORGANIC, BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:100 CST,FREEZE POINT: 26 DEG F, SOLUBLE IN FRESH AND BRINE WATER, APPLIED BY BATCH OR DOWN HOLE INJECTION METHODS , ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.

1000758661

Chemicals & Misc.

Syn. Graphite to control/ bridge Seepage

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDSTICULATES FORM, GRAPHITE, SYNTHETIC, FOR USE FOR SEEPAGE CONTROL BRIDGING, PLUGGING, OIL MUDS, WATER MUDS,LUBRICITY, SEALING OF DEPLETED ZONES, PREVENTION OF STUCKPIPE,50 LB (22.7 KG)/ SACK, PLY OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNELAND/OR ADVERSELY AFFECT FLUID PROPERTIES. APPEARANCE: GRAY TOBLACK POWDER ODOR: ODORLESS SP. GR.: 2.25 GM/CC FREEZING POINT:NA MELTING POINT: >5000 F DEG SOLUBILITY: INSOLUBLE IN WATER &ACID PARTICLE SIZE: D90 300 D50 165 D10 75 CONTAINER IS AMULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER (INTERIORPLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LBMIN. NATURAL KRAFT PAPER (EXTERIOR PLY). 

1000758660

Chemicals & Misc.

Synthetic Graphite to control/ bridge Seepage

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDSTICULATES FORM, SYNTHETIC, FOR USE FOR SEEPAGE CONTROL BRIDGING, PLUGGING, OIL MUDS, WATER MUDS, LUBRICITY,SEALING OF DEPLETED ZONES, PREVENTION OF STUCKPIPE,SYNTHETICGRAPHITE, 50 LB (22.7 KG)/ SACK, PLY OTHER ASSOCIATED ELEMENTSMUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUIDPROPERTIES. APPEARANCE: GRAY TO BLACK POWDER ODOR: ODORLESS SP.GR.: 2.25 GM/CC FREEZING POINT: NA MELTING POINT: >5000 F DEGSOLUBILITY: INSOLUBLE IN WATER & ACID PARTICLE SIZE: D90 480 D50325 D10 180 CONTAINER IS A MULTI-WALLED SACK - 75 LB MIN.NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURALKRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIORPLY).

1000774613

Chemicals & Misc.

Premium Lubricant for WBM

LUBRICANT; DRILLING MUD, ADDITIVE TYPE, AMBER LIQUID FORM, 55 GAL/DRUM, LUBRICANT FOR SALT WATER BASED MUD AND BRINES, DISPERSED, SEA WATER, SALT SATURATED, FORMATS, COMPLETION, WORKOVER FLUIDS. USED WITH BRINES, ALSO, RECOMMENDED FOR DRILL-IN FLUIDS CONTAINING HIGH AMOUNT OF SIZEABLE CALCIUM CARBONATE, SODIUM CHLORIDE OR CALCIUM CHLORIDE. PHYSICAL STATE @ 20 C DEG: AMBER COLOR, FAINT ODOR, POUR POINT IS -10 C DEG MAX, SP. GR. 1.002 G/CC, VISCOSITY @ 40 C DEG IS 120 MM2/S, FLASH POINT 230 C DEG, INSOLUBLE IN WATER, DOES NOT FORM GREASING AND IT DOES NOT PHASE OUT. BOTTOM HOLE TEMP. LIMIT: 160 C DEG (320 F), PH LIMIT MAX 10.5, REDIAGREEN EME SALT IS A MIXTURE OF FATTY ACID, C1618 AND C18-UNSATURATED COMPOUNDS WITH 2, 2, 2-NITRILOTRI-ETHANOL AND FATTY ACIDS, ESTERS WITH POLYOL. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECTED FLUID PROPERTIES.

1000775556

Chemicals & Misc.

Steel Seal Fine: Graphite as LCM additive

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSSCIRCULATION ADDITIVE TO STOP LOSSES IN POROUS ANDMICRO-FRACTURED FORMATIONS,GRAY-BLACK ANGULAR MATERIAL CARBONBASED MATERIAL,50 LB SACK,FOR USE WITH SYNTHETIC AND WATER-BASEDDRILLING FLUIDS IMPARTS LUBRICITY FOR WATER BASED FLUIDS TOCONTROL SEEPAGE AND LOST CIRCULATION 15-25 LB/BBL USED AS ABACKGROUND CONCENTRATION, 60-110 LB/BBL LCM PILL FOR SPOTTINGOVER THIEF ZONES, 4-10 LB/BBL FOR LUBRICITY IN WATER BASEDFLUIDS. ODORLESS, SG 1.75,FLASH POINT >356OC,INSOLUBLE IN WATER,PARTICLES SIZE DRY SIEVE ANALYSIS:FINE 99% MIN & REGULAR 95%MIN. THROUGH (30 MESH) DRY SIEVE ANALYSIS:FINE 40% MIN & REGULAR2% MAX THROUGH (200 MESH) MEDIAN PARTICLE SIZE: 80 CONTAINERMUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'SNAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. THECONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BEAS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIORPLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LBMIN. NATURAL KRAFT PAPER (EXTERIOR PLY) SAUDI ARAMCO'S PERSONNELWILL CARRY OUT SAMPLING AND TESTING AS NEEDED.

1000775555

Chemicals & Misc.

Steel Seal: Graphite as LCM additive

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSSCIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND FRACTUREDFORMATIONS,BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LBBAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDSIMPARTS LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE ANDLOST CIRCULATION 15-25 LB/BBL USED AS A BACKGROUNDCONCENTRATION, 50-100 LB/BBL LCM PILL FOR SPOTTING OVER THIEFZONES, 3-10 LB/BBL FOR LUBRICITY IN WATER BASED FLUIDS.ODORLESS, SG 1.75, FLASH POINT >356OC,INSOLUBLE IN WATER,PARTICLES SIZE PERCENT < 40 MESH: 100 PERCENT > 200 MESH: 95CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALLBE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER(INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RDPLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) SAUDIARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING ASNEEDED.

1000813126

Chemicals & Misc.

SX-PLUS

"ADDITIVE DRILLING FLUID; BLACK SOLID POWDER PARTICULATES OF SPECIFIC SIZED GRINDS FORM,HEAT TREATED CARBON BASED MATERIAL,FOR USED FOR SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY, SEALING OF DEPLETED ZONES, PREVENTION OF STUCK PIPES,GRAPHITE PARTICLES 40 MESH TO GRATER THAN 200 MESH ( 425 TO > 75 MICRONS),ADDITIVE, DRILLING FLUID: BLACK SOLID POWDER PARTICULATES OF SPECIFIC SIZED GRINDS, HEAT TREATED CARBON BASED MATERIAL, USED FOR SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY, SEALING OF DEPLETED ZONES PREVENTION OF STUCK PIPES, GRAPH GREY TO BLACK POWDER SG 1.5 FLASH POINT > 350 DEG (F): MELTING POINT > 500 DEG (F): PARTICLE SIZE:D90-245, D50-160, D10-111 NEGLIGIBLE SOLUBILITY IN WATER AND OIL: USED FOR SEALING POROUS SANDS AND OTHER FORMATION TO REDUCE DIFFERENTIAL PRESSURE TRANSFER"

1000813532

Chemicals & Misc.

VISCOSITY REDUCER

ADDITIVE DRILLING FLUID; LIQUID, AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC COMPOUNDS AND ENZYMES,FOR VISCOSITY REDUCING AGENT, RETURNS HEAVY HYDROCARBONS TO AN OIL PHASE,ORGANIC, BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:200 CST,FREEZE POINT: 27 DEG F, SOLUBLE IN FRESH & BRINE WATER AND OIL SOLUBLE, APPLIED BY BATCH OR DOWN HOLE INJECTION METHODS, ++DESIGNED FOR THE TREATMENT OF DIFFICULT PARAFFIN AND ASPHALTENE PROBLEMS BREAK DOWN THE LONG CHAIN AND CYCLIC PARAFFIN'S (ALONG WITH OTHER LONG CHAIN HYDROCARBONS SUCH AS ASPHALTENES) ALLOWING THEM TO RETURN TO THE OIL PHASE PERMANENTLY. ++

1000758663

Chemicals & Misc.

Retarder: cross-linking of Polymer

ADMIXTURE DRILLING MUD; MILKY, WHITE LIQUID FORM, MAX-SHIELD LATEX, 60 WT%, FOR SEALING POLYMER IN WATER-BASED DRILLING FLUID SYSTEM, LATEX, 60 WT%, 55 GAL/DRUM, USED TO CREATE A SEMI-PERMEABLE MEMBRANE AT BOREHOLE, IMPROVE HOLE STABILITY AND REDUCE PORE PRESSURE TRANSMISSION WHICH HELPS PREVENT STUCK PIPE WHEN DRILLING DEPLETED ZONES. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. NORMAL TREATMENT: 2-5 % BY VOLUME. APPEARANCE: MILKY, WHITELIQUID. ODOR: MILD PH: 6-9 SP. GR.: 1.05 GM/CC FREEZING POINT: 32 F DEG (0 C DEG) BOILING POINT: 212 F DEG (100 C DEG) FLASHPOINT: NA RELATIVE DENSITY: 1025 KG/M3 @ 16 C DEG. SOLUBILITY: MISCIBLE WITH WATER VOC WEIGHT: <0.6%

Material No.

1000021550

Category

Chemicals & Misc.

Product Name

Weighting Agent

Description

ADMIXTURE: DRILLING MUD GROUND BARITE (BARIUM SULFATE) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER FORM, BARYTES (BASO4), FOR INCREASING DRILLING FLUIDS DENSITY UP TO 157 PCF (21 LB/GAL), BARIUM SULFATE (BASO4) 90 % WT, MINIMUM SPECIFIC GRAVITY: 4.20 4.20 GM/CC, MINIMUM, BULK DELIVERY, API 13A, SECTION 2, API 13 I, SECTION 4 & 5 (MAY, 1993 OR LATEST), API 13 K, SECTION 4 (MAY, 2000 OR LATEST)

Material No.

1000021551

Category

Chemicals & Misc.

Product Name

WBM Viscosifier

Description

ADMIXTURE: DRILLING MUD GROUND NONTREATED BENTONITEADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-BASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,MULTI-WALLED BAGS, 25 KG OR 50 LB BAG,API 13A AND API 13 I (LATEST EDITION),CONTAINER TO BE PROPERLY LABELED W/VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE, BATCH NUMBER AND STOCK NUMBER. OTHER ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. PROPER TUBE SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED AND EXPERIENCED PERSONNEL. NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). KITS COMPONENTS ITM QTY DESCRIPTION 01-- PHYSICAL REQUIREMENT: A. MOISTURE: 13% WT., MAXIMUM B. DISPERSED PLASTIC VISCOSITY, CP: 10, MINIMUM C. YIELD POINT/PLASTIC VISCOSITY RATIO: 1.5, MAXIMUM D. DISPERSED FILTRATE VOLUME, API CM3: 12.5,MAXIMUM 02--PARTICLE SIZE: A. RESIDUE ON 200 MESH ASTM E11), WET: 2.5% WT. MAXIMUM B. RESIDUE ON 100 MESH (ASTM E11), DRY: 2 % WT. MAXIMUM 03--YIELD, PER SHORT TON (2000 LBS): A. BARRELS OF VISCOSITY 15 CP: 90, MINIMUM 04--METHYLENE BLUE CAPACITY,MEQ/100G: 65,MINIMUM OR EQUIVALENT TO THE API TEST CALIBRATION BENTONITE 05--CEMENT CONTAMINATION, PH AFTER

Material No.

1000021552

Category

Chemicals & Misc.

Product Name

Non-Treaded Bentonite

Description

ADMIXTURE, DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER FORM, BENTONITE SODIUM MONTMORILLONITE, FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-BASED FLUIDS, NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS, BULK DELIVERY, API 13A AND API 13 I (LATEST EDITION)

Material No.

1000021556

Category

Chemicals & Misc.

Product Name

Biocide

Description

ADMIXTURE: DRILLING MUD; 5 GALLON EPOXY PLASTIC CAN, GLUTARALDEHYDE ADMIXTURE DRILLING MUD; AQUEOUS SOLUTION FORM,GLUTARALDEHYDE,FOR A MICROBIOCIDE USED IN DRILLING FLUIDS TO CONTROL AEROBIC AND ANAEROBIC BACTERIA INCLUDING SULFATE REDUCERS,AQUEOUS SOLUTION OF GLUTARALDEHYDE,5 GAL PLASTIC CAN,CORROSIVE TO COMMON METAL, IDEAL STORAGE TEMPERATURE 80 DEG F, IN EPOXY PLASTIC CONTAINER CONTAINER PROPERLY LABELED, VENDOR'S NAME MANUFACTURER'S NAME AND LOCATION PRODUCTION DATE AND BATCH NO.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE , STOCK NUMBER, HAZARD LABEL, LOCAL SUPPLIER, AND COUNTRY OF ORIGIN MUST BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01 -- PURITY: A. GLUTARALDEHYDE SOLUTION 25% WT MINIMUM B. SPECIFICS GRAVITY AT 68 DEG.F 1.062GM/CC C. IRON, FE 5 PPM MAXIMUM D. PH: 4.1

Material No.

1000021558

Category

Chemicals & Misc.

Product Name

Alkalinity Control

Description

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM HYDROXIDE (HYDRATED LIME) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE POWDER FORM, CALCIUM HYDROXIDE, CA(OH)2 (TECHNICAL GRADE), FOR TO CONTROL PH, BICARBONATE, AND H2S CONTAMINATION. LIME IS ALSO A PRIMARY COMPONENT OF INVERT EMULSION MUDS, CALCIUM HYDROXIDE (HYDRATED LIME), 25 KG OR 50 LB BAG, SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE AND BATCH NO. NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000021559

Category

Chemicals & Misc.

Product Name

Calcium ++ Source

Description

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM SULFATE (GYPSUM) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE WHITISH POWDER FORM,HYDRATED CALCIUM SULFATE,FOR A SOURCE OF CALCIUM IONS TO TREAT CARBONATE CONTAMINATION IN HIGH PH MUDS, AND TO AVOID HOLE ENLARGEMENT WHEN ANHYDRITE IS DRILLED,25 KG OR 55 LBS/SACK,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH NO.,SAUDI ARAMCO STOCK NUMBER AND SAUDI ARAMCO P.O. NUMBER NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR BF PLY) THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED, PACKING SPEC CODES 8444-18 APPLIES. AUTHORIZED SAUDI ARAMCOÕS PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). KITS COMPONENTS ITM QTY DESCRIPTION 01 -- SPECIFICS GRAVITY 2.3 GM/CU CM 02 -- PARTICLE SIZE: A. DRY SCREEN PASS THROUGH 100 US MESH 100% MINIMUM 03 -- PURITY: A. CALCIUM SULFATE(CASO4.1/2H2O) OR (CASO4. 2H2O): 95% MINIMUM B. CALCIUM CARBONATE, CACO3: 1.5% MAXIMUM C. CLAYS 1.5% MAXIMUM

Material No.

1000021603

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) 4 PLY PAPERSACK; SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE FORM,COTTONSEED HULLS,FOR LOST CIRCULATION,FINES & DUST FREE,25 KG OR 50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000021673

Category

Chemicals & Misc.

Product Name

Shale Stabilizer

Description

ADMIXTURE: DRILLING MUD; PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA); MINIMUM 32% ACTIVE NON CONFIGURED; ADMIXTURE: DRILLING MUD, PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA), MINIMUM 32% ACTIVE FROM LIQUID BASE MATERIAL PARTIALLY HYDROLIZED POLYACRYLAMIDE SERVICE SHALE STABILIZER COMPOSITION 32% ACTIVE CONTAINER 5 GAL/CAN STANDARDS SUPPLEMENTARY REQUIREMENTS DRILLING FLUID ADDITIVE THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000021675

Category

Chemicals & Misc.

Product Name

WBM HT Fluid Loss Reducer

Description

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; DRY POWDER FORM, MODIFIED RESINATED LIGNITE DARK BROWN POWDER, FOR WATER SOLUBLE FILTRATE REDUCER FOR FLUID LOSS CONTROL AND RHEOLOGY STABILIZER IN HIGH TEMP WATER BASED MUD WELLS, 25 KG OR 55 LB BAG, SG: 1.32-1.35, COMPATIBLE USE WITH LIGNOSULFONATE AND LIGNITES, MAGNESIUM AND CHLORIDE, NORMAL TREATMENT: 2-6 LB/BBL FOR FLUID LOSS CONTROL AT TEMPERATURE APPROACHING 400 DEG F (204 DEG C), THE SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF. AUTHORIZED SAUDI ARAMCO#S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000021677

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE: DRILLING MUD; MARBLE CHIPS: (1900-2100 MICRONS) METAMORPHIC CALCIUM CARBONATE CACO3 & CAMG (CO3)2 ADMIXTURE DRILLING MUD; DRY CHIPS FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED,OIL-BASED AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,(1900-2100 MICRONS) METAMORPHIC CALCIUM CARBONATE, PURE, SOLUBLE,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE, LIMESTONE CHIPS ARE NOT ACCEPTABLE, LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT MINIMUM TENSILE STRENGTH FACTOR 5, FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT LEAST 75% OF THEIR SHELF LIFE REMAINING (THE PERIOD FROM THE DATE OF MANUFACTURE TO THE WARRANTED EXPIRATION DATE) WHEN SHIPPED OR RECEIVED AT DESIGNATED PLACE OF DELIVERY TO SAUDI ARAMCO.#REFER TO SAP NUMBER: 1000840600 FOR DISPOSABLE SUPER SACKS SPECIFICATION# THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70-2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 5 US MESH MAXIMUM 10% WT PASSING THROUGH 20 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 1900-2100 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

Material No.

1000021679

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) MULTI-WALL SACK; SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE FORM,MICA,FOR LOST CIRCULATION,25 KG OR 50 LB BAG,17 LB/FT MAXIMUM, SIEVE SPECIFICATION 2% ON MESH NO 6, 22% ON MESH NO 8, 28% ON MESH NO 12, 20% ON MESH NO 16, 15% ON MESH NO 20, 9% ON MESH NO 40, 4% THRU MESH NO 40 MULTI-PLY BAG, SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000021741

Category

Chemicals & Misc.

Product Name

SODIUM CHLORIDE, Salt

Description

ADMIXTURE: DRILLING MUD; SODIUM CHLORIDE ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COLORLESS/ WHITE GRANULES OR CRYSTALS, MAIN COMPONENT FORM, SODIUM CHLORIDE (NACI), FOR A WATER SOLUBLE WEIGHTING AGENT FOR FORMULATING SOLIDS FREE COMPLETION BRINES. TO FORMULATE CLEAR SOLUTION WITHOUT SUSPENDED MATTERS. ALSO, SALT SATURATED DRILLING FLUIDS ARE USED FOR DRILLING EVAPORITE SALT SECTIONS. SODIUM CHLORIDE, 1000 KG OR 2200 LB BAG, FREE FLOWING, 0.04 MM-0.4 MM GRAIN, SIZE NON-BREATHABLE FABRIC BAG W/ DISPOSABLE LIFTING STRAP, STACKABLE W/O PALLET & WITHOUT BOTTOM SPOUT, MIN TENSILE STRENGTH FACTOR 5 NORMAL HANDLING, SLNN-99SS MOISTURE-PROOF BIG BAGS W/LIFTING STRAPS

Material No.

1000021813

Category

Chemicals & Misc.

Product Name

Ground Marble, 9-11 Micron

Description

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3) METAMORPHOSED, FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS, GROUND MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2, BREATHLESS 1000 KG OR 2200 LB BAG, PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000021814

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED, FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS, GROUND MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2,MUTI-WALLED, 25 KG OR 50 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70-2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 100 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 9-11 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

Material No.

1000021815

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; 550-650 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED, FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2, MULTI-WALLED, 25 KG OR 50 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 550-650 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER(EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS(COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70-2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 20 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 550-650 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

Material No.

1000021818

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE;(550-650) MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3) METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE, METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG(CO3)2,BREATHLESS 1000KG OR 2200LB BAG,PROPERLY LABELED,VENDOR'S NAME, MFR'S NAME AND LOCATION, PRODUCTION DATE, BATCH NO. & STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 550-650 MICRON PARTICLE, 95% SOLUBLE 15%HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF,UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS.PRODUCT MFR &/OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS(COA)AND CERTIFICATE OF ORIGIN(COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OFTHEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MFR TO# THE WARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.# REFER TO SAP NUMBER: 1000840600 FOR # DISPOSABLE SUPER SACKS SPECIFICATION# THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXP. DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70- 2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 20 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 550-650 MICRONS 03--ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MIN.

Material No.

1000021819

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE: DRILLING MUD; GROUND MARBLE: MEDIUM GRADE; 135-165 MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;DRY,FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED & SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,GROUND MARBLE MEDIUM ,135-165 MICRON PURE METAMORPHOSED CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000KG OR 2200LB BAG,PROPERLY LABELED,VENDOR'S NAME, MFR'S NAME & LOCATION, PRODUCTION DATE, BATCH NO. & STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 135-165 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF,UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI ARABIAN CLIMATICCONDITIONS. PRODUCT MFR & OR SUPPLIERREQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OF THEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE TO# THE WARRANTED EXPIRATION DATE)WHEN SHIPPED OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO. REFER TO SAP NUMBER: 1000840600 FOR DISPOSABLE SUPER SACKS SPECIFICATION. THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXP. DATE & COUNTRY OF ORIGIN BE PRINTED ON THECONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS. KITS COMPONENTS ITM QTY DESCRIPTION 01--SPECIFIC GRAVITY : 2.70- 2.78 GM/CM 02--PARTICLE SIZE DISTRIBUTION: A- WET SCREEN: 100% WT PASSING THROUGH 60 US MESH B- MEDIAN PARTICLES "D-50": DEPICTS THE SIZE OF 50% OF THE SOLID PARTICLES, IN MICRONS, AS DETERMINED FROM THE PARTICLES SIZE DISTRIBUTION GRAPH 135-165 MICRONS 3- ACID SOLUBILITY: A- SOLUBILITY IN 15%HCL @ 150 F: 95% MINIMUM

Material No.

1000021975

Category

Chemicals & Misc.

Product Name

WBM Detergent

Description

AGENT: WELL STIMULANT; 20 LITER (5GAL.) CAN. . AGENT WELL STIMULANT; FOR SURFACTANT & DETERGENT FOR DRILLING WATER & LOW SOLID MUD,LIQUID FORM,20 L OR 5 GAL CAN,PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

Material No.

1000022131

Category

Chemicals & Misc.

Product Name

Degreaser

Description

DEGREASER: GENERAL PURPOSE; SLIK NO. 5; 55 GALLON DRUM . CLEANER; DEGREASER, GENERAL PURPOSE TYPE,LIQUID FORM,FOR RIGS, CUTTING WASH FOR OIL MUD SYSTEMS & OIL SLICK DISPERSANT,55 GAL DRUM,TYPE "SLIK NO 5", SOLUBLE IN WATER & ORGANIC SOLVENTS REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644175..PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

Material No.

1000022134

Category

Chemicals & Misc.

Product Name

Corrosion Inhibitor

Description

INHIBITOR: CORROSION; 55-GAL DRUM. . . INHIBITOR; CORROSION, COAT-415 TYPE,55 GAL DRUM,CATIONIC, OIL SOLUBLE, DISPERSIBLE IN WATER BASED DRILLING MUDS, FILMING POLYAMINE SALT OF A MODIFIED FATTY ACID FOR DRILL PIPE PROTECTION.PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

Material No.

1000022135

Category

Chemicals & Misc.

Product Name

HTHP Corrosion Inhibitor

Description

INHIBITOR: CORROSION; 55-GAL DRUM. . . INHIBITOR; 55 GAL DRUM,A BLEND OF AMINES & IMADAZOLINES FUNCTION GROUPS, OIL SOLUBLE /WATER DISPERSIBLE CORROSION INHIBITOR, AMINE BASEDAMINE BASED, RECOMMENDED FOR USE IN HIGH TEMPERATURE, HIGH PRESSURE ENVIRONMENTS UP TO 350-400 DEG F PROVIDES EXCELLENT CORROSION PROTECTION IN SOUR H2S, OR SWEET CO2 OIL & GAS WELLS. DISPERSIBLE IN FRESH, BRACKISH OR BRINE WATER. PACKER FLUID & CORROSION INHIBITOR. AUTHORIZED SAUDI ARAMCO#S PERSONNEL WILL CARRY OUT SAMPLING & TESTING AS NEEDED.PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

Material No.

1000022136

Category

Chemicals & Misc.

Product Name

Corrosion Inhibitor

Description

INHIBITOR: CORROSION; 55-GAL DRUM. . . INHIBITOR; CORROSION, COAT B-1400 TYPE,55 GAL DRUM,CATIONIC, WATER SOLUBLE, HETEROCYCLIC AMINE, BLENDED WITH METHANOL MICROBIOSTAT TO CONTROL AEROBIC & ANAEROBIC BACTERIA GROWTH, USE AS A CORROSION INHIBITOR PACKER FLUID.PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

Material No.

1000022138

Category

Chemicals & Misc.

Product Name

ADDITIVE DRILLING FLUID

Description

KEROSENE, LOW TOXICITY, ODORLESS ADDITIVE DRILLING FLUID; CLEAR LIQUID, FREE FROM SUSPENDED MATTER FORM,KEROSENE, LOW TOXICITY, ODORLESS BASE OIL ADDITIVE,FOR AA OIL-BASED DRILLING FLUIDS,LOW AROMATIC OIL,BULK DELIVERY,LOW TOXICITY OIL COMPATIBLE WITH ALL OIL-BASED DRILLING FLUIDS ADDITIVES (EMULSIFIERS, ORGANOPHILIC CLAYS, AND FILTRATE CONTROL AGENTS) SPECIFIC GRAVITY @ 15 DEG C .77- 79 (ASTM D 1298), FLASH POINT: MORE THAN 185 DEG F (85 DEG C) (ASTM D 93), ANILINE POINT: MORE THAN 167 DEG F (75 DEG C) (ASTM D 611), TOTAL AROMATICS: LESS THAN . 5% VOL (ASTM D 1319), OLEFINS CONTENT: NIL PPM, BENZENE CONTENT: NIL PPM, POLYNUCLEAR AROMATIC: NIL PPM, LC50: MORE THAN 100000 PPM. (MYSID SHRIMP NINETY-SIX HOUR BIOASSAY TEST). AUTHORIZED SAUDI ARAMCO#S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED.

Material No.

1000022170

Category

Chemicals & Misc.

Product Name

Potato Starch [SACK]

Description

ADMIXTURE: DRILLING MUD; 25 KG BAG; POTATO STARCH STABLE AGAINST BACTERIA ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COARSE GRANULATED POWDER FORM,POTATO STARCH,FOR PROVIDES FILTRATE CONTROL W/MINIMUM VISCOSITY BUILDUP. THE PRODUCT IS A NON-IONIC POLYMER USED IN WATER- BASED FLUIDS WITH HIGH CONCENTRATIONS OF MONOVALENT AND DIVALENT CATIONS OR COMBINATIONS OF ELECTROLYTES AND IN CLAY-FREE, NON-DISPERSIVE SYSTEMS,POTATO STARCH,25 KG OR 50 LB BAG,NO PARTICLES (RESIDUE) GREATER THAN 2000 MICROMETERS SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. MULTI-WALLED BAGS, SEALED WITH INNER POLYETHYLENE COATING, MAIN COMPONENT PREGELATINZED, NON- FERMENTING POTATO STARCH BIODEGRADABLE AND ENVIRONMENTALLY ACCEPTABLE NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000022179

Category

Chemicals & Misc.

Product Name

LUBE 167

Description

LUBRICANT: DRILLING MUD; DIAMINE AND FATTY ACID WITH ALCOHOL AMIDE IN VEGETABLE OIL LUBRICANT; DRILLING MUD TYPE,LIQUID, SOLIDS FREE, AMBER FORM,208.2 L (55 GAL) DRUM,NON-TOXIC LUBRICANT FOR REDUCING ROTATIONAL TORQUE, DRAG AND BIT BALLING, CAUSE NO ADVERSE EFFECTS ON MUD PROPERTIES AND CAN BE USED IN ALL DIFFERENT TYPES OF WATER-BASED FLUIDS. THE PRODUCT MUST BE EFFECTIVE OVER A WIDE TEMPERATURE RANGE IN THE PRESENCE OF CONTAMINANTS INCLUDING HIGH SOLIDS, HIGH CALCIUM OR MAGNESIUM. SHOULD NOT CAUSE FOAM OR GREASE OUT. DRUMS MUST BE MARKED WITH: VENDORS'S NAME & LOCATION, PRODUCTION DATE, BATCH NO., PURCHASE ORDER NO., AND STOCK NO.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000029881

Category

Chemicals & Misc.

Product Name

Empty BIG BAG for Barite

Description

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; ORANGE COLOR; (FOR BARYTES). CONTAINER; BARYTE TRANSPORT TYPE,0.99 M3 (35 CU FT),BODY AND CONE SECTION: M049 LID SECTION: M426 INLET AND OUTLET SPOUT: M326 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED LID MADE FROM WIO2 MATERIAL,ORANGE,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B) STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000029882

Category

Chemicals & Misc.

Product Name

Empty BIG BAG for Bentonite

Description

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; BLUE COLOR; (FOR BENTONITE). CONTAINER; BENTONITE TRANSPORT TYPE,0.99 M3 (35 CU FT),BODY AND CONE SECTION: M047 LID SECTION: M425 INLET AND OUTLET SPOUT: M325 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED LID MADE FROM WIO2 MATERIAL,BLUE,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B) STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC, CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000029887

Category

Chemicals & Misc.

Product Name

Lifting Ring for BIG BAG

Description

BIG BAG SYSTEM COMPONENTS: LIFTING RING: BIG BAG; TYPE 109.5. . RING; BIG BAG LIFTING TYPE,BIG BAG SYSTEM COMPONENTS, IBC. THE WIRE ROPE SLINGS SHOULD BE MADE OF STEEL FERRULES AS PER ARAMCO GI 7.029. TRANSPORT CONTAINERS LTD, TYPE 109.5..PRODUCT MFR & OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) & CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MFR, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE & COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS &/OR PAPER BAGS.

Material No.

1000029930

Category

Chemicals & Misc.

Product Name

ZIP TIE for BIG BAG

Description

BIG BAG SYSTEM COMPONENTS: ZIP TIES: NYLON; BIG BAG; TYPE 120-R. . TIE; ZIP TYPE,NYLON,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD TYPE "120-R"..PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000177936

Category

Chemicals & Misc.

Product Name

Alkalinity Control

Description

CHEMICAL; GR USP, CITRIC ACID, FOR LABORATORY, POWDER FORM, 50 KG (110 LB) NET WT POLYETHYLENE LINED DRUM, 99.5% CITRIC ACID MIN, CITRIC ACID (ANHYDROUS), REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644278

Material No.

1000182767

Category

Chemicals & Misc.

Product Name

Glycol

Description

ANTIFREEZE; MONO ETHYLENE GLYCOL (MEG) TYPE,SPECIFIC GRAVITY 20/20 C 1.115-1.116, DISTILLATION RANGE 196.0-199.0 DEG C AT 760 MM HG, WATER (W/W) 0.05% MAX, IRON (PPM W/W) 0.1 MAX, ACIDITY WT AS ACETIC ACID 0.001% MAX, 225-250 KG, 208.2 L (55 GAL) DRUM, TECHNICAL, LIQUID, ARAMCO LABORATORY ANALYSIS IS REQUIRED, DRUM TO BE LABELED IN ARABIC AND ENGLISH AS FOLLOWS, "MONO ETHYLENE GLYCOL (MEG)" S/N 26-382-444-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644200

Material No.

1000183214

Category

Chemicals & Misc.

Product Name

Acid

Description

CHEMICAL; GR TECHNICAL,HYDROCHLORIC ACID,FOR REGENERATION OF DEMINERALIZER BEDS,LIQUID FORM,49 L (13 GAL) POLYETHYLENE CARBOY ENCASED IN A WOODEN BOX,31% SOLUTION W/W MIN, IRON 20 PPM MAX, SULFATE 0.2% MAX, CLORINE (CL2) 100 PPM MAX, ORGANIC CONTAMINANTS 0.05 GM/L MAX,MURIATIC ACID,UN 1789, CAS NO 7647-01-0,US DEPT OF TRANSPORT HAZARDOUS LABEL "CORROSIVE" MUST BE AFFIXED TO CONTAINER REQUIRES SAUDI ARAMCO HAZCOM LABEL IN

Material No.

1000184370

Category

Chemicals & Misc.

Product Name

Barabuf, pH Stabilizer

Description

CHEMICAL; GR TECHNICAL,M20,POWDER FORM,22.7 KG (50 LB) - 25.0 KG (55 LB) SACK,96% MG0 MIN,MAGNESIUM OXIDE,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE PRODUCT SHOULD BE PACKED IN 3 OR 4 PLY PAPER SACKS

Material No.

1000184543

Category

Chemicals & Misc.

Product Name

Methanol

Description

CHEMICAL; GR A,METHANOL,LIQUID FORM,208.2 L (55 US DRUM,SYNTHETIC,METHYL ALCOHOL (WOOD ALCOHOL),ASTM D SPEC O-M-232G GRADE A,DRUM TO BE LABELED IN ARABIC FOLLOWS: "METHANOL" S/N 26-646-940-00 REQUIRES SAUD HAZCOM LABEL IN MM# 1000642494

Material No.

1000185026

Category

Chemicals & Misc.

Product Name

O2 Scavenger

Description

CHEMICAL; GR COMMERCIAL HIGH,SODIUM SULFITE,FOR REMOVE TRACES OF DISSOLVED OXYGEN,POWDER FORM,60 KG (132 LB) PLASTIC RIMMED FIBER OR METAL DRUM WITH POLYETHYLENE LINER,95% ANHYDROUS SODIUM SULFITE BY WT MIN, CATALYZED WITH COBALT -0.03% BY WT MIN,OXYGEN SCAVENGER,26-SAMSS-027,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644272.. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000185389

Category

Chemicals & Misc.

Product Name

Alkalinity Control

Description

CHEMICAL; GR TECHNICAL,POTASSIUM HYDROXIDE,FREE FLOWING GRANULAR OR FLAKES FORM,25 KG (55 LBS)/SACK,POTASSIUM CARBONATE, K2CO3 0.8% WT, MAXIMUM POTASSIUM CHLORIDE 0.02% WT MAXIMUM, IRON 0.001% WT MAXIMUM,90% KOH PURITY, SHIPMENT OF PRODUCT SHALL CONFIRM TO SAUDI ARAMCO EXPORT PACKING MANUAL. SAUDI ARAMCO WILL CARRY OUT SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000186247

Category

Chemicals & Misc.

Product Name

SODIUM HEXAMETAPHOSPHATE

Description

CHEMICAL; GR FOOD,SODIUM HEXAMETAPHOSPHATE,FOR POTABLE WATER TREATMENT,GRANULAR FORM,40-45 KG (88-100 LB) DRUM,SODIUM HEXAMETAPHOSPHATE,AWWA B502,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642502

Material No.

1000186443

Category

Chemicals & Misc.

Product Name

Alkalinity Control

Description

CHEMICAL; GR ACS,SODIUM SULFITE,FOR REDUCE FREE CHLORINE & OXYGEN CONTENT OF RAW WATER PRELIMINARY TO WATER SOFTENING,POWDER FORM,50 KG (110 LB) DRUM WITH POLYETHYLENE INNER BAG,97% ANHYDROUS SODIUM SULFITE MIN UNCATALYZED SOLUBLE IN WATER,OXYGEN SCAVENGER,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642488

Material No.

1000187171

Category

Chemicals & Misc.

Product Name

Glycol

Description

ANTIFREEZE; TRIETHYLENE GLYCOL TYPE,TECHNICAL, LIQUID, 208.2 LITER/ DRUM TO BE LABELED IN ARABIC AND ENGLISH AS FOLLOWS: "TRIETHYLENE GLYCOL" S/N 26-922-105-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644191

Material No.

1000732382

Category

Chemicals & Misc.

Product Name

Hole Cleaning sweeb agent

Description

CLEANER; CONTACT TYPE,LIQUID FORM,FOR ELECTRIC MOTOR AND EQUIPMENT,20 LITER CAN,HYDROCARBON BASED CLEANER & DEGREASER,FLASH POINT (CLOSED CUP) 63 DEG C, NON-CONDUCTIVE & NON-CORROSIVE, APPERANCE CLEAR LIQUID. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.# 

Material No.

1000757567

Category

Chemicals & Misc.

Product Name

Powder Solid Form, Lost Circulation Material

Description

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM, LOST CIRCULATION MATERIAL, FOR VISCOUS PILL FOR CURING LOSS CIRCULATION DURING DRILLING OPERATION, ORGANIC CELLULOSIC FIBERS AND ADDITIVES, 40 LB (18.14 KG) SEALED MULTI-WALL PAPER BAG, TAN COLOR, SPECIFIC GRAVITY 1.2, INSOLUBLE IN WATER

Material No.

1000757568

Category

Chemicals & Misc.

Product Name

ADMIXTURE, DRILLING MUD, CLEAR LIQUID

Description

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,ADDITIVE RETARDER,FOR CROSS-LINKING X-LINK POLYMER FOR MIXING VISCOUS PILLS FOR CURING FLUID CIRCULATION LOSS DURING DRILLING OPERATION,CROSS LINKING MATERIAL FOR X-LINK POLYMER,5 GALLONS PER CAN,SPECIFIC GRAVITY 1.323 @20 DEG C, BOILING POINT 221 DEG F (105 DEG C), MOLECULAR WEIGHT 112.0, SOLUBLE IN WATER

Material No.

1000757569

Category

Chemicals & Misc.

Product Name

WBM Viscosifier

Description

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SILICATE,FOR VISCOSIFIER USED IN MILLING CASING WINDOWS,CALCIUM ALUMINOSILICATE,50 LB SEALED MULTI-WALL PAPER BAG,GRAY COLOR, SPECIFIC GRAVITY 0.6@ 20 DEG C, PH 11, INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER , PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG FOLLOWS: (CONTAINER) SHALL BE AS 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER , HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000757580

Category

Chemicals & Misc.

Product Name

Lubricant for WBM

Description

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM, WATER SOLUBLE LUBRICANT, FOR REDUCES TORQUE, DRAG AND FRICTION IN WATER BASED DRILLING MUDS, ND OF SURFACTANT MIXTURES POLYOLS DESIGNED FOR USE AS MIUM LUBRICANT, 200 LITER DRUM, TOLERANT TO HIGH PH AND COMPATIBLE IN HIGH SALINE FLUIDS INCLUDING SATURATED NACL, KCL, NABR, K-FORMATE CALCIUM CHLORIDE FLUIDS WITHOUT GREASING OUT AND/OR CHEESING. STABLE OVER WIDE RANGE OF TEMPERATURE UP TO 325 F DEG. THE NORMAL DOSAGE: 0.5-3% BY VOL. FLASH POINT >200 DEG F (PMCC). SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL, THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN SHALL BE PRINTED ON THE CONTAINER. AUTHORIZED SAUDI ARAMCO PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000774250

Category

Chemicals & Misc.

Product Name

POTASSIUM FORMATE SOLUTION

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,POTASSIUM FORMATE SOLUTION (KCOOH & H20), FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION, POTASSIUM FORMATE 75% AND WATER 25% SOLUTION, CLEAR LIQUID, DENSITY 1570 KG/M3 @ 20 DEG C, PH 10.0 @ 25 DEG C,1000 LITER (1570 KG) IBC OR TOTE CONTAINER (CO), IRON LESS THAN 10 PPM, CHLORIDE CONTENT LESS THAN 40 PPM, TURBIDITY MAX 10 NTU, SOLUBLE IN ALL PROPORTIONS IN WATER EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF.

Material No.

1000774251

Category

Chemicals & Misc.

Product Name

Base brine fluid & completion fluid

Description

ADMIXTURE DRILLING MUD; FREE FLOWING SOLID CRYSTALS FORM,POTASSIUM FORMATE 97% WEIGHT (KCOOH),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM FORMATE 97% WEIGHT & CONDITIONING AGENT 3% WEIGHT, POWDER, WHITE COLOR, BULK DENSITY 1080 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.91, SOLUBILITY IN WATER 355 GR/100 ML @ 20 DEG C , MELTING POINT 169 DEG C TEMPERATURE STABILITY UP TO 400 ¡F (204 ¡C), SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE, IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF. AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000774252

Category

Chemicals & Misc.

Product Name

Base brine fluid & completion fluid

Description

ADMIXTURE DRILLING MUD; FREE FLOWING GRANULES FORM,SODIUM FORMATE POWDER 98% (NACOOH),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,SODIUM FORMATE 98% WEIGHT & OTHER ORGANICS 2% WEIGHT, WHITE COLOR, BULK DENSITY 900-950 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.92, SOLUBILITY IN WATER 81GR/100 ML @ 20 DEG C , MELTING POINT 253 DEG C , TEMPERATURE STABILITY UP TO 400 ¡F (204 ¡C), SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCOEXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE, IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF. AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000775550

Category

Chemicals & Misc.

Product Name

Performing Second Stage Cementing

Description

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 8.0-12 MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON 9-5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE, SIZED LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62, INSOLUBLE IN WATER, 25 KG PER SACK,GRAVEL MADE FROM LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING 10,000 MICRON AND 8,000 MICRON SIEVES THE GRAVEL RETAINED ON TOP OF THE 8,000 MICRON SIEVE IS TO BE COLLECTED AND SACKED WHILE THE GRAVEL RETAINED ON TOP OF THE 10,000 MICRON SIEVE SHOULD BE DISCARDED AUTHORIZED. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000775551

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 18.0 -26.5 MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON 9-5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62, INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING MUST BE PREPARED BY USING FOUR SIEVES 26.5 MM, 22.4 MM, 20 MM, AND 18 MM. THE GRAVEL RETAINED ON TOP OF THE 22.4 MM,20 MM AND 18 MM SIEVES SHOULD BE COLLECTED AND SACKED WHILE THE GRAVEL RETAINED ON TOP OF THE 26.5 MM SIEVE SHOULD BE DISCARDED. AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000775557

Category

Chemicals & Misc.

Product Name

BDF-398: lcm & bridge agent

Description

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SYNTHETIC GRAPHITE,FOR LOSS CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-FRACTURED FORMATIONS,SYNTHETIC GRAPHITE,50 LB. BAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS LUBRICITY FOR WATER BASED FLUIDS GREY-BLACK ANGULAR MATERIAL,ODORLESS, SG 1.75, INSOLUBLE IN WATER, MEDIAN PARTICLE SIZE D-50: 50 15-25 LB/BBL AS A BACKGROUND CONCENTRATION FOR SEEPAGE AND LOST CIRCULATION CONTROL. 60-110 LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONESOR ON BOTTOM PRIOR TO TRIPS AND 4-10 LB/BBL FOR LUBRICITY IN WATER-BASED FLUIDS. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

Material No.

1000775558

Category

Chemicals & Misc.

Product Name

Sized CaCO3 5 Micron for Bridging Agent

Description

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 5 MICRONS FORM,CALCIUM CARBONATE, FOR BRIDGING AGENT FOR FLUID LOSS CONTROL, INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS, SIZED CALCIUM CARBONATE POWDER, 50 LB. BAG, SG 2.7, PARTICLES SIZE: 5 MICRONS. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.

Material No.

1000775559

Category

Chemicals & Misc.

Product Name

Sized CaCO3 25 Micron for Bridging Agent

Description

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 25 MICRONS FORM,CALCIUM CARBONATE, FOR BRIDGING AGENT FOR FLUID LOSS CONTROL, INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS,SIZED CALCIUM CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 25 MICRONS. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED. 

Material No.

1000775560

Category

Chemicals & Misc.

Product Name

Sized CaCO3 55 Micron for Bridging Agent

Description

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 50 MICRONS FORM, CALCIUM CARBONATE,FOR BRIDGING AGENT FOR FLUID LOSS CONTROL, INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS, SIZED CALCIUM CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 50 MICRONS. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.

Material No.

1000775561

Category

Chemicals & Misc.

Product Name

Clay Grabber: Flocculent & Encapsulated Clay agent (also for HPWBM)

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,NON-IONIC LIQUID POLYMER,FOR FLOCCULANT AND CLAY ENCAPSULATOR. IT STOPS SHALE DISPERSION AND HELPS STABILIZE SHALES IN THE WELLBORE,HIGH MOLECULAR WEIGHT, NON-IONIC LIQUID POLYMER,5 GAL PAIL,OPAQUE LIQUID, OFF-WHITE COLOR, PH:6.5-7.5, CONCENTRATION 30-40 (1% ACTIVE POLYMER), SG 1.02 -1.06, STABILITY UP TO 300 DEG F, IMIISCIBLE IN WATER FOR RESULTS CLAY GRABBER FLOCULANT SHOULD BE MIXED THROUGH A HIGH SHEAR HOPPER. 0.5-1.0 LB/BBL IN THE HYDRO-GUARD SYSTEM. 0.25-0.5 LB/BBL FOR CLEAR WATER DRILLING. 0.5-1.0 FOR TROUBLESOME SHALES IN A WATER- BASED SYSTEM. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

Material No.

1000789220

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,25 LB/SACK,APPEARANCE: FINE: BROWN POWDERED, BULK DENSITY: 31 LB/FT(497 KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS, DENSITY@20C (KG/L) 1.1, FREEZING POINT 190 C, FLASH POINT 193 C, OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000789221

Category

Chemicals & Misc.

Product Name

LCM

Description

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,40 LB/SACK,APPEARANCE: COARSE:GRANUALTED MATERIAL, BULK DENSITY: 31 LB/FT(497 KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS, DENSITY@20C (KG/L) 1.1, FREEZING POINT 190 C, FLASH POINT 193 C, SOLUBILITY IN WATER: INSOLUBLE, OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

Material No.

1000811421

Category

Chemicals & Misc.

Product Name

OHR-759, A co-surfactant agent

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,N-BUTANOL,FOR USED AS A CO-SURFACTANT TO REMEDIATE WELLBORE DAMAGE,SURFACTANT BLEND WITH N-BUTANOL 100%,55 GALLON DRUM,APPEARANCE CLEAR, COLORLESS LIQUID,ODOR SWEET, RELATIVE DENSITY:810 KG/M3 BOILING POINT:118 DEG C,FLASH POINT:37 DEG C, SOLUBLE IN WATER,AUTO-IGNITION TEMPERATURE 343¡C. ++THIS ITEM IS ONE OF COMPONENT USED TO FORMULATE THE MICRO-WASH SYSTEM FOR WELLBORE REMEDIATION AND REMOVE DAMAGE TO THE RESERVOIR DRILLED WITH INVERT EMULSION FLUIDS. ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MICRO-WASH ACID SYSTEM CONSISTS BAKER ++ HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000811422

Category

Chemicals & Misc.

Product Name

OHR-AC, Acid corrosion inhibitor

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,ACID CORROSION INHIBITOR,FOR USED AS AN ACID CONTROL ADDITIVE IN THE MICRO-WASH ACID SYSTEM,,CONTAINING PROPARGYL ALCOHOL 5-10%,METHANOL 30-60% AND BLEND OF NON-IONIC SURFACTANTS,55 GALLON DRUM,APPEARANCE:CLEAR AMBER LIQUID,ODOR:SWEET,SPECIFIC GRAVITY:885-897 KG/M3,FLASH POINT:10-15.6 DEG C, POUR POINT:LESS THAN -20.2 DEG C,SOLUBLE IN WATER, PH:4-6(5% IN 25% IPA/75% WATER),FLASH POINT:10-15.6 DEG C (TAG CLOSED CUP),VAPOUR PRESSURE:85MM HG AT 21 DEG C, ++ THIS ITEM PROVIDES CORROSION RESISTANCE WHILE REMEDIATING WELLBORE DAMAGE AND DESTROYING OIL-MUD FILTER CAKE, THE PRODUCT IS BIODEGRADABLE, ACID DISPERSIBILE AND IS TOLERANT FOR SALTS PRESENT IN ACIDS. ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.# 

Material No.

1000811423

Category

Chemicals & Misc.

Product Name

OHR-757, Blend surfactants de-emalsifier agent

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS.,FOR TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS,SODIUM TRIDECYL ETHER SULFATE 10-20%& OTHER COMPONENTS,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND ANIONIC SURFACTANTS., TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS, SODIUM TRIDECYL ETHER SULFATE 10- 20% & OTHER COMPONENTS, 275 GALLON IBC CONTAINER, APPEARANCE:TRANSPARENT, YELLOW LIQUID, ODOR:DISINFECTANT,SPECIFIC GRAVITY: 1086.5 KG/M3,. FLASH POINT> 100¡C SOLUBLE IN WATER, PH: 7.8 AT 25 DEG C, VISCOSITY: 28. 0CST AT 40¡C. ++ THIS MATERIAL IS USED AS ONE OF SURFACTANT COMPONENT IN THE MICRO-WASH ACID SYSTEM IT IS BLENDED OF NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL. ++ CONTAINER MUST BE PROPERLY LABELED WITH:VENDOR'S NAME MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS: PRIME-743, PRIME-760, PRIME-770 ,OHR- 759, OHR-AC, OHR-757, OHR- 750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000811424

Category

Chemicals & Misc.

Product Name

OHR-750,Blend surfactants de-emulsifyer & water wetting agent

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,FOR TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES,ALKYPHENYL OXIDE SULPHONATES,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND ANIONIC URFACTANTS, TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES, ALKYPHENYL OXIDE SULPHONATES , 275 GALLON IBC CONTAINER , APPEARANCE:CLEAR ,YLLOW- ORANGE LIQUID, ODOR:DISINFECTANT SPECIFIC GRAVITY:1108 KG/M3,. BOILING POINT:212?F , FLASH POINT >100¡C, SOLUBLE IN WATER : PH:5.5 AT 25?C, VISCOSITY:69CST AT 40¡C PROPRIETARY BLEND THAT IS CUSTOM DESIGNED TO DISPERSE FILTER CAKE AS A COMPONENT IN MICRO-WASH ACID SYSTEM TO REMOVE OBM SKIN DAMAGE AND ALLOW THE RESERVOIR TO FLOW AT MAXIMUM POTENTIAL. IT IS BLEND OF NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL TENSION. NORMAL TREATMENT: 10 - 25% BY VOLUME ++ CONTAINER MUST BE PROPERLY LABELED WITH: VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED RECONFIGURED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000811425

Category

Chemicals & Misc.

Product Name

PRIME-743,-blend surfactants de-emulsifier & water wetting agent

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,GLYCEROL-BELEND OF NON-IONIC SURFACTANTS,FOR USED FOR REMOVE OIL-WET SOLIDS FROM THE WELLBORE AND WATER-WET METAL SURFACES.,GLYCEROL, BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,++ APPEARANCE OPAQUE YELLOW-ORANGE LIQUID, PH 7.6, SPECIFIC GRAVITY 1015 KG/M3, BOILING POINT 100 DEG, FLASH POINT GREATER THAN 93 DEG C, WATER SOLUBLE ++ FULLY COMPATIBLE AT ALLRATIOS WITH OIL MUD SPACERS AND OIL-NORMAL ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000811427

Category

Chemicals & Misc.

Product Name

PRIME-770, blend surfactants de-emulsifier & water wetting agent

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,FOR TO CREATE AN EFFECTIVE FOLLOW-UP DISPLACEMENT NEWTONIAN CLEANING PILL USED TO REMOVE OIL-WET SOLIDS,BLEND OF NON-IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE: TURBID,` YELLOW-ORANGE LIQUID ODOR: MILD, SWEET SPECIFIC GRAVITY: 1098 KG/M3, FLASH POINT: GREATER THAN 100 DEG C(TCC),WATER SOLUBLE ++ FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED DRILLING FLUIDS. ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. ++ SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000811529

Category

Chemicals & Misc.

Product Name

LOSURF-259, surfactant

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,ISOPROPANOL AND HEAVY AROMATIC PETROLEUM NAPTHA,FOR BREAKS EMULSION IN OIL BASE MUD FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FILTER CAKE REMOVAL,5 GALLON CAN,ADDITIVE, DRILLING FLUID: LIQUID, ISOPROPANOL AND HEAVY AROMATIC PETROLEUM NAPTHA, BREAKS EMULSION IN OIL BASE MUD FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FOR FILTER CAKE REMOVAL, ISOPROPANOL AND HEAVY AROMATIC PETROLEUM NAPTHA, 5 GALLON CAN, APPEARANCE: CLEAR LIGHT AMBER, ALCOHOL ODOR, SPECIFIC GRAVITY: 0.92 @ 20 DEG C BOILING POINT: 92 DEG C, DISPERSES IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING EMULSIONS, NORMAL USE CONCENTRATION: 0.1 - 2.0 % V/V. NONIONIC NONEMULSIFIER BLEND, PRIMARILY DESIGNED FOR ACIDIZING LIMESTONE, DOLOMITE AND SANDSTONE FORMATION & FRACTURE TREATMENT ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID PRODUCTS, LOSURF-259, MUSOL, N-FLOW 325 & BDF-443. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000811540

Category

Chemicals & Misc.

Product Name

MUSOL, mutual solvent

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,ETHYLENE GLYCOL MONOBUTYL ETHER SOLVENT,FOR REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING CONDITION OF THE FORM,ETHYLENE GLYCOL MONOBUTYL ETHER,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, ETHYLENE GLYCOL MONOBUTYL ETHER SOLVENT, USED WITH NONANIONIC SURFACTANT (LOSURF-259) TO REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING CONDITION OF THE FORM, ETHYLENE GLYCOL MONOBUTYL ETHER, 55 GALLON DRUM , APPEARANCE: COLORLESS LIQUID, MILD ODOR, SPECIFIC GRAVITY: 0.9 @ 20 DEG C BOILING POINT: 171 DEG C SOLUBLE IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING' EMULSIONS, NORMAL USE CONCENTRATION: 10 % V/V. PRIMARILY USED DURING ACIDIZING OPERATIONS IN SILICATE FORMATION. ++ CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID PRODUCTS LOSURF-259, MUSOL, N-FLOW 325 & BDF-443. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000811647

Category

Chemicals & Misc.

Product Name

N-FLOW 325, Formic Acid Precursor

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL DIFORMATE,FOR RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE AND REPAIR FILTER CAKE AND REPAIR MUD DAMAGE,DIETHYLENE GLYCOL DIFORMATE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, DIETHYLENE GLYCOL DIFORMATE , RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE AND REPAIR MUD DAMAGE, DIETHYLENE GLYCOL DIFORMATE, 55 GALLON DRUM , APPEARANCE: LIGHT YELLOW LIQUID,ODOR: CHARACTERISTIC, SPECIFIC GRAVITY 1.2 GM/CC, BOILING POINT:240 DEG C, PH:2.8 SOLUBLE IN WATER ++ COMPATIBLE WITH OIL, FORMATION BRINE AND DRILL- IN FLUID BASE OIL (DIESEL), THE CHEMICAL IS DISSOLVED IN THE CARRIER BRINE, BECAUSE THE ACID LIBERATION ACTION IS SLOW. ACID WILL BE GENERATED OVER THE SUBSEQUENT PERIOD OF TIME, NORMAL CO. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000812015

Category

Chemicals & Misc.

Product Name

BORE-HIB: bore hole stabilizer

Description

ADDITIVE DRILLING FLUID; DARK YELLOW LIQUID FORM,GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN BE DEPLETED WHEN DRILLING ANHYDRITE, GREEN. CEMEN,GLYCERINE AND SILICATE SALT MIXTURE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: DARK YELLOW LIQUID, GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES USED AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND C OUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. APPEARANCE DARK YELLOW SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

Material No.

1000812016

Category

Chemicals & Misc.

Product Name

GEM GP: shale inhibitor

Description

ADMIXTURE DRILLING MUD; DARK BROWN LIQUID FORM,POLYALKYLENE GLYCOL OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED TO IMPROVE LUBRICITY, SHALE STABILITY AND REDUCE BIT BALLING. NORMAL TREATMENT,POLYALKYLENENE GLYCOL,55 GALLON DRUM,CONCENTRATION IS 2-6% BY VOLUME IN A MUD SYSTEM BUT OPTIMUM CONCENTRATION SHOULD BE IDENTIFIED ON A CASE BY CASE BASIS. APPEARANCE YELLOW TO BROWN LIQUID, ODOR MILD, SPECIFIC GRAVITY 1.01, BOILING POINT (¡C) 126 C, SOLUBILITY IN WATER MISCIBLE. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 

Material No.

1000812034

Category

Chemicals & Misc.

Product Name

BDF-443, Wetting agent surfactant

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,SURFACTANT,FOR VALUE EMULSIFIER, CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID CLEANING,BLEND OF PROPRIERATORY CHEMICALS,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, SURFACTANT, EMULSIFIER, CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID CLEANING, BLEND OF PROPRIERATORY CHEMICALS, 55 GALLON DRUM , APPEARANCE: MILKY TO PALE YELLOW LIQUID, ODOR: MILD SWEET, SPECIFIC GRAVITY 1.04 GM CC, BOILING POINT: 240 DEG C, PH 5 - 7.5 (2.5 %), FLASH POINT: GREATER THAN 100 DEG C, SOLUBLE IN WATER ++ IS WATER WET SURFACTANT DISSOLVED IN THE CARRIER BRINE ALONG WITH N-FLOW. IT CHANGES THE WETTABILITY OF OIL MUD FILTER CA. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.# 

Material No.

1000812301

Category

Chemicals & Misc.

Product Name

Clayseal: clay Suppressing agent

Description

ADMIXTURE CEMENT; FOR CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING.,TYPE ADMIXTURE, CEMENT HYDRO GUARD, CLAYSEAL,ETHOXYLATED POLYAMINE,5 GAL GALLON PAIL,APPEARANCE: TRANSPARENT YELLOW LIQUID, ODOR: AMINE, SPECIFIC GRAVITY: 1GM/CC, SOLUBILITY: SOLUBLE IN WATER. CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING ALL BENTONITE ADDITIONS AND ADDING FLUID LOSS ADDITIVES.INITIAL TREATMENTS IN NONDISPERSED SYSTEMS MAY CAUSE SLIGHT FLOCCULATION AND MAY REQUIRE A THINNER. CLAYSEAL ADDITIONS WILL BE 4-8 LB/BBL AND FOR BEST RESULTS A MINIMUM OF 4 LB/BBL OF CLAYSEALÀ IS REQUIRED. ++CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++HYDRO -GUARD PLUS MUD SYSTEM CONSISTS HALLIBURTON BAROID PRODUCT, CLAYSEAL, GEM GP& BORE-HIB. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000814796

Category

Chemicals & Misc.

Product Name

GLACIAL ACETIC ACID, carbonate filter cake breaker

Description

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,ACETIC ACID> 96%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE PARTICLES IN WELLBORE REMEDIATION,ACETIC ACID > 96%,275 GALLON IBC TOTE,CLEAR LIQUID, STRONG PUNGENT VINEGAR ODOR DENSITY 1050 KG/M3, BOILING POINT 117 DEG C, FLASH POINT >102.2¡C, SOLUBLE IN WATER,SOLUBLE AUTO-IGNITION TEMPERATURE 799¡C. ACETIC ACID IS A COMPONENT OF THE BAKER HUGES MICRO- WASH SYTEM TO IMPROVE WELL PRODUCTIVITY. IT IS A CARBOXYLIC ACIDS WITH THE MOLECULAR FORMULA OF CH3COOH, NORMAL TREATMENT 1 - 15 % BY VOLUME. 275 GALLON IBC CONTAINER MUST BE PROPERLY LABELED WITH, VENDORS NAME, MANUFACTURERS NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER,SAUDI ARAMCOS PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).PACKING/CONTAINER SPECIFICATIONS:LEAK PREVENTION MECHANISM :VALVE CLOSED WITH SCREW CAP, PE-DISC AND FLAT GASKET, VALVE HANDLE SECURED WITH A LOCKING SCREW.INNER CONTAINER SHOULD BE HIGH MOLECULAR WEIGHT, HIGH DENSITY POLYETHYLENE (HMWHDPE), EXTRUSION BLOW MOULDED, ESPECIALLY SHAPED TO ENSURE COMPLETE DISCHARGE OF CONTENTS.OUTER CONTAINER SHOULD BE RIGID, WELDED GALVANIZED TUBULAR STEEL GRID WITH A LARGE PERMANENTLY FIXED IDENTIFICATION PLATE.MOULDED BOTTOM SHELL SHOULD BE PRESSED GALVANIZED STEEL BASE SHAPED TO SUPPORT THE INNER CONTAINER AND ASSIST TOTAL DRAINAGE. PALLETS SHOULD BE STEEL AND HAVE 4 WAY ENTRY. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000823315

Category

Chemicals & Misc.

Product Name

ALL-TEMP: deflocculant & rheological stabalizer

Description

ADDITIVE; DRILLING MUD TYPE,FOR USED AS HT THINNER IN WIDE RANGE OF WATER-BASE.,SOLID - WHITE POWDER FORM,25.0 LB/BAG,USED AS HT THINNER IN WIDE RANGE OF WATER-BASE. DOES NOT CONTAIN HEAVY METALS/CHROME OR REQUIRE SODIUM HYDROXIDE FOR ACTIVATION AND STABLE UP TO TEMPERATURE 400 F DEG(204 DEG). TREATMENT RANGE FROM 0.5 LB/BBL TO 3.0 LB/BBL, ODOURLESS, PH : 7-9 (1%AQ. SOLN.), SOLUBLE IN WATER, SHEAR STRENGTH, LB/100 FT_, 32 MAX PLASTIC VISCOSITY, CP, 32 MAX, YIELD POINT, LB/100 FT_, 32 MAX, 10 SECOND GEL, LB/100 FT_, 12 MAX, 10 MINUTE GEL, LB/100 FT_, 38 MAX, 30 MINUTE FILTRATE, ML, 48 MAX. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000823316

Category

Chemicals & Misc.

Product Name

ECCO-TEMP: Temperature extended

Description

ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200 LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY : 1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20¡ C 1.05 - 1.15 ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000823317

Category

Chemicals & Misc.

Product Name

CHEMTROL X: high-temperature filtration-control agent

Description

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE MUD.,SOLID - TAN TO BLACK POWDER FORM,50.0 LB/BAG,BLEND OF DERIVATIZED ACRYLIC COPOLYMER DEFLOCCULANT AND CAUSTICIZED LIGNITE PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE MUD. INITIAL TREATMENTS OF 2.0 TO 6.0 LB/BBL. NORMAL TREATMENT LEVELS ARE BASED ON TYPES OF WBM & NEEDED. APPEARANCE : SOLID, TAN TO BLACK POWDER, ODOR: EARTHY, SPECIFIC GRAVITY: 1.5 , PARTIALLY SOLUBLE IN WATER. SPECIFIC GRAVITY: 1.5 PH: 9-10 SOLUBILITY : PARTIALLY SOLUBLE IN WATER. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000823318

Category

Chemicals & Misc.

Product Name

KEM-SEAL PLUS: copolymer filtration control product

Description

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR HTHP FILTRATION CONTROL ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS,SOLID - WHITE POWDER FORM,25.0 LB/BAG,HTHP FILTRATION CONTROL ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS, TEMPERATURES UP TO 500 DEG. F. TREATMENT RANGE VARIES BASED ON FILTRATE VALUE DESIRED AND WELL TEMPERATURE, A REASONABLE RANGE WILL BE 1 TO 6 LB/BBL.IS, SHOULD BE ADDED SLOWLY TO AVOID HIGH RAISE IN VISCOSITY. APPEARANCE : SOLID, WHITE POWDER, ODOR:SLIGHT, SPECIFIC GRAVITY :1300 KG/M3 @ 16 DEG. C, SOLUBILITY : SOLUBLE IN WATER, SALT/HARD WATER PERFORMANCE, FILTRATE, ML: 17 MAX AGING PERFORMANCE, FILTRATE, ML: 19 MAX. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000792804

Category

Chemicals & Misc.

Product Name

Lost Circulation Material

Description

ADMIXTURE DRILLING MUD; SOLID FORM,ORGANIC CELLULOSE FIBER, LIGHT TAN / BROWN,FOR USED FOR SEALING THIEF ZONES, HIGHLY FRACTURED/VUGULAR FORMATIONS AND MINIZING THE RISK OF DIFFERENTIAL STICKING,A FINELY SIZED (MICRONIZED) ORGANIC CELLULOSE FIBER,25LB.BAG,ODORLESS, SG: 0.9, MIX OF FINELY DIVIDED CELLULOSE FIBERS, INSOLUBLE IN WATER, NON TOXIC, PH: 6.5-7.5,SIEVE SPECIFICATION FOR FRAC-SEAL COARSE: RETAIN ON 40 MESH SIEVE: 4.93%, RETAIN ON 60 MESH SIEVE: 2.17%, RETAIN ON 80 MESH SIEVE: 3.73%, RETAIN ON 100 MESH SIEVE: 6.17%, RETAIN ON 140 MESH SIEVE:6.87%, RETAIN ON 170 MESH SIEVE:17.63%, RETAIN ON 270 MESH SIEVE:30.47%:NORMAL TREATMENT: 8-10 LB/BBL OF FRACSEAL-COARSE, THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS,1ST PLY 75 LB.NATURAL KRAFT PAPER(INTETIOR PLY)2ND PLY 75 LB.NATURAL KRAFT PAPER 3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY).THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER.THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED OTHER ASSOCIATED LEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.#

Material No.

1000824113

Category

Chemicals & Misc.

Product Name

GUAR GUM: Viscosifier for high salt water

Description

ADDITIVE DRILLING FLUID; CREAMY COLOURED POWDER FORM,PURE GUAR GUM,FOR USED AS COMPETITIVE SUPPLEMENTARY VISCOSIFIER FOR QUICK VISCOSITY SWEEPS BUILDER WHILE DRILLING SURFACE HOLES WITH WATER.,25 KG METAL BAGS,IT IS PARTICULARLY USEFUL FOR OFFSHORE DRILLING, AS IT CAN BE ADDED DIRECTLY TO SEAWATER, , WHICH ELIMINATES THE NEED FOR LARGE QUANTITIES OF FRESH WATER AS WELL AS THE TIME REQUIRED TO PREHYDRATE BENTONITE. IT IS AN UNTREATED GUAR GUM AND IS NON-IONIC IN NATURE. IT SHOWS EXCELLENT PERFORMANCE OVER A WIDE PH RANGE. IT'S RECOMMENDED TO ADD BIOCIDE, IF GUAR GUM SOLUTION KEPT OVER A PERIOD OF TIME. APPEARANCE: CREAMY COLOURED POWDER, ODOR: BEAN LIKE, MOISTURE: 8.0% (MAXIMUM), PH: 8.0, ASH :1% (MAXIMUM), PARTICLE SIZE THROUGH 200 MESH (75 MICRON): 95% (MINIMUM), BROOKFIELD VISCOSITY : 8000 CP (MINIMUM), (1% SOLUTION IN DISTILLED WATER AT 25 DEG. C, AFTER 24 HOURS (SPINDLE #4, 20 RPM), FANN VISCOSITY INITIAL 10 MINUTE: 42 CP (MINIMUM), (2.00 GM / 350 MLS, IN SEA WATER, @ 511 SEC-1, F1 SPRING. SEA WATER: 41.95 GM NACL IN 1000 MLS DISTILLED WATER. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000840600

Category

Chemicals & Misc.

Product Name

Bag Component

Description

CONTAINER; DISPOSABLE BAG TYPE,SIZE 90 CM X 90 CM X 100 CM,1.5 TON OR 3300 LBS,BARITE,REGULAR BAG SHAPE,TOP STRAP CLOSURE,ORANGE,THE FOUR LIFITNG STRAPS SHOULD EXTEND TO THE FULL BODY OF THE BAGS, REFERENCE TO SAUDI ARAMCO PACKING SPECIFICATIONS MS-8314-11, 1. DIMENSION & WEIGHT: HEIGHT 100 CMS(39"), WIDTH: (90 CMSX 90 CMS) 35" X35", WEIGHT: 2.90 KGS(WITH LINER), VARIANCE ON WEIGHT: 100 GRAMS +/-, LAMINATION:NIL, 2. BODY FABRIC: MATERIAL POLYPROPYLENE, COLOUR: ORANGE, GSM: 200, MESH: 11X12, 3. GENERAL: SAFE WORKING LOAD: 1500 KGS, SAFETY FACTOR: 5:01, 4. PRINTINGL: ONE SIDE ONE COLOUR, 5. SEWING THREAD: COLOUR: WHITE, 6. LIFTING LOOP: CROSS CORNER: FOURLOOPS, LOOP WIDTH: 7.5 CMS, LOOP LENGTH ABOVE THEBAG: 30 CMS, LOOP LENGTH ON THE BAG: 40 CMS, FULL LOOP: AROUND THE BAG, STEVE DORING LOOP: NIL, FILLING ARRANGEMENT: SPOUT DIA: 40CMS (16"), LENGTH OF SPOUT: 50CMS (20"), COLOUR OF SPOUT FABRIC: WHITE, TYPE OF CLOSURE: SIMPLE CLOSURE, DISCHARGE ARRANGEMENT: NO SPOUT AND BOTTOM MUST BE FLAT, LINER SPECIFICATIONS: TYPE OF LINER: PILLOW TYPE LOOSE LINER INSERTED AND FASTENED TO BOTTOM SPOUT, SIZE OF LINER: 190 CMSX 300 CMS, MICRON THICKNESS OF LINER: 120 MICRON MINIMUM, WEIGHT OF LINER: 1200 GRAMS +/- 50 GRAMS, WEIGHT OF BAG INCLUSIVE OF LINER: 2700 GRAMS +/- 100 GRAMS, STRENGTH PARAMETERS: BODY FABRIC: 200 GSM WITH RF (STRENGTH-ABOVE 200KGF), BOTTOM PANEL: 205 GSM (STRENGTH-ABOVE 210KGF), TOP PANEL: 160 GSM (STRENGTH-ABOVE 130KGF), FILLING AND DISCHARGE SPOUT: 75 GSM (STRENGTH-ABOVE 80KGF), LIFTING LOOP: 55G/M (STRENGTH-ABOVE 1950KGF), BODYLOOP: 30G/M (STRENGTH-ABOVE 950KGF), TIE TAPE: 6G/M (STRENGTH-ABOVE 150KGF), SEWING THREAD USEDIN PANEL ATTACHMENT: 3300 DENIER (STRENGTH-ABOVE 20KGF), SEWING THREAD USED IN LOOP ATTACHMENT: (1000 DENIER/2PLAY (STRENGTH-ABOVE 15KGF).

Material No.

1000843350

Category

Chemicals & Misc.

Product Name

H2S Scavenger

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, HYDROCARBON, FOR OIL SOLUBLE HYDROGEN SULFIDE SEQUESTERING AGENT/SCAVENGER AQUEOUS SOLUTION MIXTURE OF INORGANIC COMPOUNDS, FOR THE REMOVAL OF H2S IN VARIOUS APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL ROAD TRANSPORTATION, DRILLING MUD, REFINING AND P, PROPRIETARY BLEND OF ZINC COMPOUNDS IN HYDROCARBON BASE, DRUM, APPEARANCE/ODOR: VISCOUS YELLOW TO YELLOW-GREEN LIQUID/MILD ODOR. BOILING POINT: 180 DEG CELSIUS. VAPOR PRESSURE: 0.50 MMHG. SOLUBILITY IN WATER: INSOLUBLE. SPECIFIC GRAVITY: 0.9 (WATER = 1.0). MOLECULAR WEIGHT: PROPRIETARY. PH: 6-7. FLASH POINT (METHOD): >200F. FOR THE REMOVAL OF H2S IN VARIOUS APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL ROAD TRANSPORTATION, DRILLING MUD, REFINING AND PETROCHEMICAL PLANTS, CRUDE OIL SHIPMENTS AND DISPOSAL WELLS.

Material No.

1000845427

Category

Chemicals & Misc.

Product Name

Thinner

Description

ADDITIVE DRILLING FLUID; BROWN COLORED POWDER FORM, MODIFIED TANNIN COMPOUND, FOR USED AS MUD CONDITIONER PROVIDING RHEOLOGY CONTROL IN WATER BASE FLUIDS WITH MAXIMUM DEFLOCCULATING AND SHEAR STRENGTH REDUCTION AT LOW CONCENTRATIONS. 25 LB MULTIWALL PAPER BAGS, APPEARANCE: BROWN COLORED POWD, CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000847072

Category

Chemicals & Misc.

Product Name

HT rheology stabilizer and fluid loss control agent

Description

ADDITIVE DRILLING FLUID; WHITE POWDER FORM,SYNTHETIC POLYMER,FOR CONTROLS HTHP FLUID LOSS IN FRESH, SALTY, OR HARD BRINE FLUIDS. IT INHIBITS SHALE AND STABILIZING FLUID RHEOLOGY. IT CONTROLS WATER LOSS IN ALL ENVIRONMENTS AND REDUCES DIFFERENTIAL STICKING TENDENCIES.,25 LB MULITIWALL PAPER BAG,APPEARANCE : WHITE COLOURED

Material No.

1000847074

Category

Chemicals & Misc.

Product Name

Salt

Description

ADDITIVE DRILLING FLUID; FINE CRYSTAL FORM,SODIUM BROMIDE,FOR SODIUM BROMIDE IS AN INORGANIC COMPOUND THAT IS USED TO PREPARE DENSE CLEAR FLUIDS FOR USE IN DRILLING, COMPLETION OR WORK_ GAS WELLS. R OF OIL OR,SODIUM BROMIDE,PP WOVEN BAG WITH PE LINER INSIDE,APPEARANCE: WHITE FINE CRYSTAL,CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000866365

Category

Chemicals & Misc.

Product Name

Shale Stabilizer

Description

ADDITIVE DRILLING FLUID; POWDER FORM, HIGH-MOLECULAR WEIGHT PARTIALLY-HYDROLYZED POLYACRYLAMIDE (PHPA), IT PROVIDES BOREHOLE STABILITY AND REDUCES FRICTION IN SENSITIVE SHALE SECTIONS. IT ALSO ACTS AS A FILTRATION CONTROL AND INCREASES VISCOSITY IN WATER-BASED DRILLING FLUIDS. PARTIALLY-HYDROLYZED POLYACRYLAMIDE (PHPA), BAG, APPEARANCE: GRANULAR WHITE SOLID POLYMER. SOLUBILITY I, CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000866812

Category

Chemicals & Misc.

Product Name

Non-conventional LCM

Description

ADDITIVE DRILLING FLUID; POWDER FORM, SPECIAL BLEND OF GRADED SEALING PARTICLES. FOR DESIGNED TO BE EFFECTIVE IN CURING SEVERE TO TOTAL LOSS CIRCULATION IN HIGHLY FRACTURED/VUGULAR OR POROUS CARBONATE FORMATIONS, WITHOUT THE ADDITION OF OTHER CONVENTIONAL LCMS IT CAN BE USED IN ALL TYPES OF DRILLING FLUIDS AND IT IS NOT RECOMMENDED, SPECIAL BLEND OF GRADED SEALING PARTICLES., BAG, APPEARANCE: LIGHT TAN/BROWN SPECIFIC GRAVITY: 0.9 SOLUBILITY IN WATER: INSOLU PH: 6.5-7.5

Material No.

1000875822

Category

Chemicals & Misc.

Product Name

ADDITIVE DRILLING FLUID, LIQUID

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, IVE ND OF SURFACE, FOR SPECIAL BLEND OF SURFACE AGENTS ROP ENHANCER, USED IVE IN THE WATER BASE MUD FOR REDUCING TORQUE AND DRAG AND PREVENTING BIT BALLING. NORMAL TREATMENT:1-2% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE IDCAP D, KLA-STOP AND POROSEAL. IVE ND OF SURFACE, 55 GAL/ DRUM, APPEARANCE: YELLOW TO BROWN 0.78- FLASH POINT: > 201¡FLUID SPECIFIC GRAVITY 

Material No.

1000875823

Category

Chemicals & Misc.

Product Name

ADDITIVE DRILLING FLUID, LIQUID, POLYAMINE DERIVATIVE

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, POLYAMINE DERIVATIVE, FOR USED FOR SUPPRESSING CLAY SWELLING. IT EFFECTIVELY, INHIBITS SHALE OR GUMBO CLAYS FROM HYDRATING , AND MINIMIZES THE POTENTIAL FOR BIT BALLING. NORMAL TREATMENT: 1-4% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE , IDCAP D, KLA-STOP AND POROSEAL, POLYAMINE DERIVATIVE, DRUM 55 GAL/ DRUM,PH (5% SOLUTION): 9.2-10. FLASH POINT: > 200¡F APPEARANCE: COLORLESS LIQUID CIFIC GRAVITY: 1.03-1.0

Material No.

1000875824

Category

Chemicals & Misc.

Product Name

Flocculent & Encapsulated Clay

Description

ADDITIVE DRILLING FLUID; POWDER FORM, DRY ACRYLIC ACID COPOLYMER, FOR ENCAPSULATION COPOLYMER USED TO PROVIDE CUTTINGS, ENCAPSULATION AND CLAY DISPERSION INHIBITION WITH MINIMAL VISCOSITY CONTRIBUTION FOR WATER BASE FLUIDS AND SALINE WATER ENVIRONMENTS. NORMAL TREATMENT: 2-4 LB/BBL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE, DRY ACRYLIC ACID COPOLYMER, BAG 25 KG/SACK, APPEARANCE: WHITE POWDER SPECIFIC GRAVITY: 0.8 PH (1% SOLUTION): 6

Material No.

1000875825

Category

Chemicals & Misc.

Product Name

Sealing Polymer

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, STARCH COPOLYMER, FOR PROVIDES PERMEABILITY PLUGGING TO EFFECTIVELY SEAL SHALES AND FILTER CAKES, IMPROVING THE PERFORMANCE OF HIGHLY INHIBITIVE WATER-BASE DRILLING FLUIDS. IT ADDITIVE IS ALSO USED TO PROVIDE SUPPLEMENTAL FLUID LOSS CONTROL IN HIGH-TEMPERATURE APPLICATIONS NORMAL POROSEAL -SHIELD SYSTEM CONSISTS DRILZONE IDCAP D, KLA-STOP ATMENT:2-5% VOL/VOL., STARCH COPOLYMER, 55 GAL/DRUM, APPEARANCE: WHITE LIQUID SPECIFIC GRAVITY: 1.0-1.1 PH (CONC. SOLUTION): 10 

Material No.

1000876207

Category

Chemicals & Misc.

Product Name

Hole cleaning agent

Description

ADDITIVE DRILLING FLUID; SOLID FORM, ACRYLIC COPOLYMER BASE, FOR TO PROVIDE VISCOSITY, REDUCE FRICTION, ENCAPSULATE CUTTINGS AND PROVIDE A LIMITE AMOUNT OF FLUID-LOSS CONTROL IN WATER-BASE DRILLING FLUIDS. IT IS A POLYMER STICK THATEASILY ADDED TO THE DRILLSTRING DURING CONNECTIONS AND PROVIDES A CONSISTENT METHOD OF, ACRYLIC COPOLYMER BASE, PAIL, APPEARANCE: TUBE FILLED WI STICK SPECIFIC GRAVITY: 1.0 SOLUBILITY SOLUBLE IN WATER SIZE: 1-1/4 X 15 IN., ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000876985

Category

Chemicals & Misc.

Product Name

Non-damaging LCM

Description

ADMIXTURE DRILLING MUD; ADMIXTURE FORM,BLEND OF SIZED CACO3 AND POLYMERS,FOR REDUCES FLUID INVASION WITHOUT DAMAGING THE FORMATION BY SEALING GAUGE SCREEN FROM INTERNAL SIDE TO BE EASILY REMOVED WITH PRODUCTION FLUID FLOW.,BLEND OF SIZED CACO3 AND POLYMERS,BBL,CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000877296

Category

Chemicals & Misc.

Product Name

SBP-24 DEFOAMER,

Description

AGENT WELL STIMULANT; FOR TO CONTROL FOAMING IN SPACER OR CLEANING FLUID FORMULATIONS TYPICALLY TREATMENT: 100-500 PPM. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT SBP-4620 SURFACTANT, SBP-9125 SURFACTANT, SBP-9755 SURFACTANT SBP-600,SILICONE EMULSION BASE,LIQUID FORM,PAIL,APPEARANCE: WHITE CREAMY SPECIFIC GRAVITY: 0.99 PH: 7-8,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000877297

Category

Chemicals & Misc.

Product Name

SBP-85 GEL-EÊ liquid viscosifier

Description

AGENT WELL STIMULANT; FOR NON-DAMAGING VISCOSIFIER THAT READILY DISPERSIBLE IN ALL BRINE SYSTEMS AND EASIER TO USE THAN DRY VISCOSIFIERS . IT IS SOLUBLE IN HYDROCHLORIC, ACETIC AND FORMIC ACIDS AND DEGRADABLE AT TEMPERATURES ABOVE 275¡F,BLEND OF XANTHAN GUM/ORGANIC SOLVENT,LIQUID FORM,PAIL,APPEARANCE: BEIGE COLORED SPECIFIC GRAVITY: 1.07 PH: 7 FLASH POINT: 160 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000877298

Category

Chemicals & Misc.

Product Name

SBP-600 BIOCIDE

Description

AGENT WELL STIMULANT; FOR TO CONTROL ALL FORMS OF BACTERIA WHICH IS PARTICULARLY DETRIMENTAL IN FRESH AND BRINE-WATER DRILLING AND PACKER FLUIDS TYPICAL TREATMENT: 5 GAL/100 BBL. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP 4620,BLENDED ORGANIC SULFUR ANTIMICROBIAL AGENT,POWDER FORM,PAIL,APPEARANCE: WHITE CRYSTAL SPECIFIC GRAVITY: 0.96,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000877299

Category

Chemicals & Misc.

Product Name

SBP-SPACER MIX, viscosity agent

Description

AGENT WELL STIMULANT; FOR TO DEVELOP THE VISCOSITY AND GELLING AND TO BE EASILY HYDRATED EVEN UNDER A LIMITED MIXING CONDITION. ALSO, IT ENHANCES THE HIGH TEMPERATURE VISCOSITY PERFORMANCE IN SOLID-FREE POLYMER GEL.TYPICAL TREATMENT: 8-25 LB/BBL. SPACER-TEK SYSTEM CONSISTS OF,PATENTED BLEND OF VISCOSIFIERS AND DISPERSANT,POWDER FORM, BAG,APPEARANCE: BEIGE-COLORED P S.G.: 1.76,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000877460

Category

Chemicals & Misc.

Product Name

SBP-101 cleaning solvent

Description

AGENT WELL STIMULANT; FOR USED AS THE PRIMARY CLEANING PILL FOR DISPLACEMENT CLEANUP OF SYNTHETIC AND OIL-BASED DRILLING MUD. THE SOLVENT PRODUCT IS TYPICALLY MIXED WITH BRINE TO PROVIDE DISPERSED MACRO DROPLETS OF SOLVENT IN BRINE AND ALSO A HIGHER SOLVENT PILL DENSITY FOR SUPER, BLENDS OF SURFACTANTS AND SOLVENTS,LIQUID FORM, DRUM, APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.85-0.87 PLASH POINT: 122 F,++ CONTAINER MUST BE PROPERLY LABELED WITH,VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000877461

Category

Chemicals & Misc.

Product Name

SBP-4620 cleaning surfactants

Description

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE OF TEMPERATURES SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125 SURFACTANT SBP,BLEND OF NON-IONIC SURFACTANTS AND LINEAR ALCOHOL CO-SOLVENT,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.002 PH: 7-8 PLASH POINT: > 200 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000877462

Category

Chemicals & Misc.

Product Name

SBP-9125 , cleaning surfactants

Description

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD SURFACTANT WITH LOWER HLB NUMBER FOR LOWER TEMPERATURE CLEANING APPLICATION SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP,ETHOXYLATED ALCOHOL BASE,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.92 PH: 7-8 PLASH POINT: 255 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000877463

Category

Chemicals & Misc.

Product Name

SBP-9755 cleaning SURFACTANT

Description

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE OF TEMPERATURES. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER ,SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125 SURFACTANTS,ALKYL POLYGLUCOSIDE BASE,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.1 PH: 7-8 PLASH POINT: 212 F,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000881942

Category

Chemicals & Misc.

Product Name

(EZ Squeeze), non-conventional LCM

Description

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE,FOR HIGH FLUID LOSS LCM FORMS A RAPID SOLID PLUG AGAINST LOSS ZONE WHEN LIQUID PHASE IS SQUEEZE FROM SLURRY IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF WATER/OIL BASED MUDS.,MIXTURE,BAG,APPEARANCE: OFF-WHITE TO GA BULK DENSITY: 41-46 LB/CU PH: 11.5-12.8,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000881943

Category

Chemicals & Misc.

Product Name

Swellcm , Gelled swelling sealing LCM

Description

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE OF POLYSACCHARIDES,FOR SWELLING/SEALING AGENT USED TO FILL FRACTURES AND VOIDS BY CREATING A SOLID INNER MATRIX SEAL IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF WATER/OIL BASED MUDS. USUALLY PUMPED AHEAD OF EZ-SQUEEZE OR CEMENT JOB AND IT HAS A GOOD SOLUBILITY IN ACID,MIXTURE OF POLYSACCHARIDES,PAIL,APPEARANCE: LIGHT TAN TO OF BULK DENSITY: 35-55 BA/CU,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000883084

Category

Chemicals & Misc.

Product Name

Well Bore Strengthing and fluid loss control agent

Description

ADDITIVE DRILLING FLUID; POWDER FORM,BLEND OF MODIFIED POLYMERS,FOR PROVIDES CENTRAL TO THE ULTRA-LOW INVASIVE FLUID AND GREATLY REDUCES FLUID INVASION INTO MATRIX. TYPICAL TREATMENT: 3- 8 LB/BBL.,BLEND OF MODIFIED POLYMERS,25 POUND MULTI-WALLED SACKS,APPEARANCE: POWDER TO FLAKE. SPECIFIC GRAVITY: 1.0. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000885304

Category

Chemicals & Misc.

Product Name

OBM Lubricant

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,MIXTURE OF FATTY ACIDS AND SPECIALTIES, FOR DRILLING LUBE IS USED TO HELP IMPROVE LUBRICITY OF OIL-BASED MUD SYSTEMS, THEREBY HELPING TO REDUCE TORQUE AND DRAG, AND REDUCING RISK OF DIFFERENTIAL STICKING IN DEEP, TORTUOUS, HIGH ANGLE OR EXTENDED REACH WELLS, MIXTURE, 55-GALLON (208 LITRE) DRUM,APPEARANCE: AMBER LIQUID.

Material No.

1000888050

Category

Chemicals & Misc.

Product Name

Glass Filler, weighting agent

Description

ADDITIVE DRILLING FLUID; SOLID (PULVERIZED POWDER) FORM, GLASS BEADS, FOR IT IS CHEMICALLY INERT WEIGHTING MATERIAL FOR LOW DENSITY FLUIDS. IT IS USED IN LCM SYSTEM. IT IS STABLE AT TEMPERATURES UP TO 1112 ¡F., GLASS BEADS, BAG, APPEARANCE: SOLID CLEAR AND ODORLESS. SG1: 0

Material No.

1000888051

Category

Chemicals & Misc.

Product Name

Resin for high temperature (> 95 C)

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, POLYESTER RESIN BASE, FOR THERMALLY ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS. POLYESTER RESIN BASE, IBC, APPEARANCE: YELLOW LIQUID. DEN, WORKING TEMPERATURE RANGE IS 212 ¡F - 302 ¡F FOR HIGH TEMPERATURE APPLICATIONS. THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS FILLER.

Material No.

1000888052

Category

Chemicals & Misc.

Product Name

Thermaset 55-4, Resine for low temperature (< 95 C)

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS.,POLYESTER RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING TEMPERATURE RANGE IS 140 ¡F - 275 ¡F FOR LOW TEMPERATURE APPLICATIONS. THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS FILLER. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTIONDATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000888053

Category

Chemicals & Misc.

Product Name

Silicate viscosifier

Description

ADDITIVE DRILLING FLUID; SOLID FORM, SILICON DIOXIDE, FOR SPECIAL VISCOSIFIER FOR LCM SYSTEM. IT CAN BE USED IN TEMPERATURE RANGE OF 32 ¡F - 1112 ¡F., SILICON DIOXIDE, BAG, APPEARANCE: SOLID ODORLESS. SG: 2.2

Material No.

1000888054

Category

Chemicals & Misc.

Product Name

Curing Initiator (> 95 C)

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, TERT-BUTYL PERBENZOATE, FOR CURING AGENT (ACCELERATOR) FOR LCM SYSTEM FOR HIGH TEMPERATURE APPLICATIONS (205 ¡F - 266 ¡F), TERTIARY-BUTYL PEROXYBENZOATE, CAN, APPEARANCE: LIQUID. DENSITY: 1 

Material No.

1000888055

Category

Chemicals & Misc.

Product Name

Curing Initiator (< 95 C)

Description

ADDITIVE DRILLING FLUID; LIQUID DISPERSION FORM, DIBENZOYL PEROXIDE, FOR CURING AGENT (ACCELERATOR) FOR LCM SYSTEM FOR LOW TEMPERATURE APPLICATIONS (32 ¡F # 205 ¡F), DIBENZOYL PEROXIDE / C 9-11 BRANCHED ALKYLBENZOATE, CAN, APPEARANCE: LIQUID. COLOR: WHI 

Material No.

1000888056

Category

Chemicals & Misc.

Product Name

Solvent for equipment cleaning

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL ADIPATE, FOR IT IS A CLEANING AGENT USED IN SYSTEM APPLICATIONS TO CLEAN OILY AREAS IN TANKS, PIPES, ETC., DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL ADIPATE, IBC, APPEARANCE: LIQUID. COLOR: LIG

Material No.

1000892842

Category

Chemicals & Misc.

Product Name

pH control agent and viscosity enhancer

Description

ADDITIVE DRILLING FLUID; SOLID FORM, FINE PARTICLE-SIZE MAGNESIUM COMPOUND, FOR CONTROLS THE PH OF BRINE-BASED AQUEOUS DRILLING FLUID SYSTEMS MIXED IN ZINC BROMIDE, CALCIUM CHLORIDE, MINIMUM PERCENTAGE AS MGO: 98, A 25 KG MULTI-WALLED SACK, PHYSICAL PROPERTIES: APPEARANCE, ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).

Material No.

1000892844

Category

Chemicals & Misc.

Product Name

Viscosifier

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, DIETHYLENE GLYCOL, FOR A VISCOSITY ENHANCER AND STABILIZER IN DRLG FLUID SYSTEMS MIXED IN CALCIUM CHLORIDE. IT REDUCES VISCOSITY IF CONCENTRATION EXCEEDS 1.0 % BY VOLUME. DIETHYLENE GLYCOL: 100% PURITY, 7.6 LITERS CAN, PHYSICAL AND CHEMICAL PROPERTIES, ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE IN CANS (1 CAN = 7.6 LITERS). 

Material No.

1000892845

Category

Chemicals & Misc.

Product Name

Fluid loss control

Description

ADDITIVE DRILLING FLUID; SOLID FORM, SPECIAL BRANCHED CHAIN MODIFIED STARCH DERIVATIVE, FOR PROVIDES BOTH VISCOSITY AND FLUID LOSS CONTROL IN DRILLING FLUID SYSTEM MIXED IN CALCIUM CHLORIDE. HIGH MOLECULAR WEIGHT, BRANCHED-CHAIN STARCH DERIVATIVE, A 25 KG MULTI-WALLED SACK, TYPICAL PHYSICAL AND CHEMICAL, ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).

Material No.

1000903745

Category

Chemicals & Misc.

Product Name

Cement spacer system

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,ANTI-FOAMER FOR IN-HOUSE CEMENT SPACER SYSTEM,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER SYSTEM FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE MUD SYSTEMS DESIGNED TO PREVENT AIR-ENTRAPMENT AND USED DURING MIXING TO PROVIDE AN ACCURATE FLUID WEIGHT. THIS ANTI-FOAMER IS USED IN COMBINATION LOSURF-259(SAP# 1000811529 A SYSTEM TO FORMULATE ENT SPACER DESIGNS FOR USE TIFICATE . TIFICATE OF ORIGIN COO IDS PACKAGED IN A 5 GALLON -ANALYSIS (COA) AND STIC PAIL .VENDER TO SUBMIT COSIFIER (SAP# 1000903746) H DIACEL¨ ADJUSTABLE SPACER H NON -AQUEOUS DRILLING,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE CEMENT SPACER,PAIL,APPEARANCE: VISCOUS WHITE SPECIFIC GRAVITY = 1.00 G BOILING POINT > 35 C (>95F VISCOSITY: 10000 CST FLASHPOINT: > 101.1¡C (>21,++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, 

Material No.

1000903746

Category

Chemicals & Misc.

Product Name

Cement spacer system

Description

ADDITIVE DRILLING FLUID; GREY POWDER FORM,VISCOSIFIER FOR IN-HOUSE CEMENT SPACER SYSTEM,,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER SYSTEM FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE MUD SYSTEMS DESIGNED TO PROVIDE FLUID LOSS CONTROL AND VISCOSITY ALLOWING USERS TO EASILY FORMULATE A CEMENT SPACER WITH THE DESIRED RHEOLOGY CERTIFICATE OF ORIGIN COO DENSITY THIS VISCOSIFIER I LOSURF-259 SAP #1000811529 A SYSTEM TO FORMULATE -S SAP # 1000903745 ENT SPACER DESIGNS FOR IDS PACKAGED IN 50-LB COMBINATION WITH DIACEL¨ TIWALL WATER RESISTANT BAGS ANALYSIS (COA) WITH NON-AQUEOUS DRILLING DER TO SUBMIT CERTIFICATE,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE CEMENT SPACER SYSTEM,BAG,APPEARANCE: OFF-WHITE POWDE SPECIFIC GRAVITY: 2.08 G/M TEMPERATURE: 40¡F - 400¡F CONCENTRATION: 2-22 LBS/BB,#++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000904194

Category

Chemicals & Misc.

Product Name

LE SUPERMUL, emulsifier

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER FOR INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A LIQUID PRIMARY EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: CLEAR AMBER VISCOU,REQUIRED QTY: 55 GAL PER DRUM. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURE'S NAME, LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S.PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES EMUSLSION STABILITY,PROMOTES OIL-WETTING AND FILTRATION CONTROL VENDER TO SUBMIT CERTIFICATE OF ANALYSIS(COA) AND CERTIFICATE OF ORIGIN (COO). A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2,6 RPM READING GREATER THAN 8 AND 3 RPMREADING GREATERTHAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000904195

Category

Chemicals & Misc.

Product Name

FACTANT, fluid loss control

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER AND WETTING AGENT FOR INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A LIQUID EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: DARK VISCOUS LIQUI,REQUIRED QTY: 55 GAL PER DRUM. CONTAINER MUST BE PROPERLY LABELED WITH: VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.MATERIAL IMPROVES EMULSION STABILITY AND HELPS TO CONTROL HTHP FILTRATION IN INVERT EMULSION DRILLING FLUIDS. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2,6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000904196

Category

Chemicals & Misc.

Product Name

BDF-513, fluid loss control

Description

ADDITIVE DRILLING FLUID; SOLID FORM,CROSS-LINKED POLYMER SOLID,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A CROSS-LINKED POLYMER SOLID THAT PROVIDES FILTRATION CONTROL FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BARO,A CROSS-LINK POLYMER SOLID,BAG,APPEARANCE: SOLID. SPECIFIC GR,REQUIRED QTY: 25 KG PER BAG. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. IT ALSO PROVIDES SECONDARY VISCOSITY AND IS BEST SUITABLE FOR LOW SOLVENCY BASE OILS. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2, 6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000904197

Category

Chemicals & Misc.

Product Name

BDF-489, viscosifier

Description

ADDITIVE DRILLING FLUID; SOLID FORM,ORGANIC BASED VISCOSIFER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. AN ORGANIC BASED RHEOLOGY MODIFIER FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BAROID.,ORGANIC BASED VISCOSIFIER,25 KG BAG,APPEARANCE: SOLID WHITE. MELTING POINT: 55,REQUIRED QTY: 25 KG PER BAG. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES LOW SHEAR RHEOLOGY. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2, 6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000904198

Category

Chemicals & Misc.

Product Name

ADAPTA, fluid loss control

Description

ADDITIVE DRILLING FLUID; SOLID FORM,METHYLSTYRENE ACRYLATE COPOLYMER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. PRIMARY FILTRATION CONTROL AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BAROID.,METHYLSTYRENE ACRYLATE COPOLYMER,25 KG BAG,APPEARANCE: SOLID WHITE. SPECIFIC GRAVITY :,REQUIRED QTY: 25 KG PER BAG. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES SECONDARY VISCOSITY AS WELL. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 1 LB/BBL LIME, 4 LB/BBL ADAPTA, 10 LB/BBL BDF-489 VISCOIFIER, 20 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16HOURS DYNAMIC HEAT AGEING AT 275 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 250 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 275 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 25 LB/100FT2, 6 RPM READING GREATER THAN 10 AND 3 RPM READING GREATER THAN 9 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000904199

Category

Chemicals & Misc.

Product Name

RHEOMOD-L, viscosifier

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,MODIFIED TRIMER FATTY ACID,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. LIQUID POLYMERIC VISCOSIFIER AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF HALLIBURTON BAROID.,MODIFIED TRIMER FATTY ACID,55 GAL DRUM,APPEARANCE: LIQUID DARK. SPECIFIC GRAVITY : 0,REQUIRED QTY: 55 GAL PER DRUM. CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. MATERIAL PROVIDES LOW SHEAR RATE RHEOLOGY AND IMPROVE FLAT GEL PROPERTY FOR DEEPWATER WELL DRILLING. IT PROVIDES SECONDARY EMULSION STABILITY AS WELL. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PERFORMANCE PROPERTIES: A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 10 LB/BBL LE SUPERMUL, 3 LB/BBL FACTANT, 1 LB/BBL LIME, 3.0 LB/BBL BDF-513 FLUID LOSS CONTROL, 5 LB/BBL BDF-489 VISCOIFIER AND 3 LB/BBL RHEOMOD-L VISCOSIFER, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 300 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND500 PSI PRESSURE, YIELD POINT GREATER THAN 20 LB/100FT2, 6 RPM READING GREATER THAN 8 AND 3 RPM READING GREATER THAN 7 AT 120 DEGREE F. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000904472

Category

Chemicals & Misc.

Product Name

Rheology modifier

Description

ADDITIVE DRILLING FLUID; LIQUID FORM, ANIONIC SYNTHETIC POLYMER IN EMULSION FORM, FOR A LIQUID POLYMERIC PREMIER VISCOSIFIER WHICH HELPS TO IMPROVE THE RHEOLOGICAL AND SUSPENSION CHARACTERISTIC OF LOW TOXICITY MINERAL OIL AND SYNTHETIC OIL-BASED DRILLING FLUIDS OR IN DIESEL OIL-BASED MUD. IT HELPS INCREASE PRIMARILY LOW SHEAR RHEOLOGICAL, ANIONIC SYNTHETIC POLYMER IN EMULSION FORM, DRUM, PHYSICAL PROPERTIES: APPEAR BOILING POINT: ~ 100 OC MELT/FREEZE POINT: -12 OC PH VALUE CONC. SOLN: 2 # 5 FLASH PO, PARAMETERS VALUE #FANN-35 F1 SPRING 6 RPM READING @ 120 OF EQUAL OR GREATER THAN 9 #FANN-35 F1 SPRING 3 RPM READING @ 120 OF EQUAL OR GREATER THAN 8# LOW SHEAR YIELD POINT LSYP @120 OF EQUAL OR GREATER THAN 7#

Material No.

1000905195

Category

Chemicals & Misc.

Product Name

Wellbore cleanup

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,ORGANIC ESTERS,FOR A LIQUID ORGANIC ACID PRECURSOR WHICH WILL GENERATE ORGANIC ACID IN#SITU DOWNHOLE WHICH HAS THE CAPABILITY TO DISSOLVE CALCIUM CARBONATE FILTER CAKE SOLIDS TO REMOVE FORMATION DAMAGE DUE TO CARBONATE SOLIDS PLUGGING,55 GAL PER DRUM,A PROPRIETARY BLEND OF ORGANIC ESTERS,PHYSICAL PROPERTIES:APPEARANCE,#CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.##A LIQUID ORGANIC ACID PERCURSOR WHICH WILL GENERATE ORGANIC ACID IN-SITU DOWNHOLE WHICH HAS THE CAPAVILITY TO DISSOLVE CALCIUM CARBONATE FILTER CAKE SOLIDS TO REMOVE FORMATION DAMAGE DUE TO CARBONATE SOLIDS PLUGGING. IT IS TO BE USED TOGETER WITH ORCA-4 WATER-WETTING SURFCTANT IN THE PREPARATION OF THE PROPRIETARY MUDWASH FILTER-CAKE BREAKER SYSTEM FOR OBM WELLBORE CLEAN-UP. VENDOR TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 210 KG (55 GAL) THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000905196

Category

Chemicals & Misc.

Product Name

Wellbore cleanup

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,WATER WETTING SURFACTANTS,FOR A LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE PREPARATION OF WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABILITY OF THE FILTER CAKE SOLIDS FROM OIL-WET TO WATER # WET.,A WATER-WETTING SURFACTANT MIXTURE,55 GAL PER DRUM,PHYSICAL PROPERTIES : APPEARAN,#CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.####A LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE PREPARATION OF WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABLITY OF THE FILTER CAKE SOLIDS FROM OIL-WET TO WATER-WET. IT IS TO BE USED TOGETHER WITH ORCA-B THE ACID PRECURSOR IN THE PREPARATION OF THE PROPRIETARY MUDWASH FILTER CAKE BRAKER SYSTEM FOR OBM WELLBORE CLEAN-UP. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). 200 KG (55 GAL). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000908458

Category

Chemicals & Misc.

Product Name

BaraZan D plus:Viscosifier / suspension agent

Description

ADDITIVE DRILLING FLUID; POWDER FORM,VISCOSIFIER / SUSPENSION AGENT (POLYSACCHARIDE),FOR FRESH WATER, SEA WATER AND BRINE,DISPERSANT-ADDED BIOPOLYMER (XANTHAN GUM),BAG (ONE BAG = 55 LBS),APPEARANCE: YELLOW TO WHITE PO,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. IT IS A BIOPOLYMER XANTHAN GUM USED TO HELP TO DISPERSE EASILY, AND TO PROVIDE VISCOSITY AND SUSPENSION IN FRESH WATER, SEA WATER AND IN BRINES, AS SODIUM AND POTASSIUM BROMIDES AND SODIUM AND POTASSIUM CHLORIDES. IT IS STABLE AT 250 DEG F (121 DEG C). TYPICAL TREATMENT OF 0.1-2 LB/BBL (0.3-5.7 KG/ CUBIC M) AS NEEDED TO OBTAIN THE DESIRED VISCOSITY. THE UNIT IS 55 LBS (25 KG)/BAG. IT IS PART OF A NON-DAMAGING SYSTEM RDF-615, WHICH CONTAINS BARABRINE DEFOAM, BARA CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580). SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000908459

Category

Chemicals & Misc.

Product Name

Oxygon: corrosion inhibitor

Description

ADDITIVE DRILLING FLUID; POWDER FORM, ORGANIC ACID SALT (OXYGEN SCAVENGER), FOR FRESH WATER, WATER BASED MUD (WBM) AND MONO OR DIVALENT BRINES, GRANULAR ERYTHORBATE MATERIAL, PAIL (ONE PAIL = 55 LBS), APPEARANCE: WHITE GRANULAR POW, ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. IT IS USED AS A CORROSION INHIBITOR OR OXYGEN SCAVENGER IN WBM, WATER AND IN MONO OR DIVALENT BRINES/COMPLETION FLUIDS. THE UNIT IS 55 LBS (25 KG)/PAIL. IT IS PART OF THE NON-DAMAGING SYSTEM - RDF -615 SYSTEM WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, BARA CARB 150, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580). TYPICAL TREATMENT OF 0.1 LB/BBL. BASE THE TREATMENT OF CIRCULATING FLUIDS ON OXYGEN CONTENT. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OFANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000908534

Category

Chemicals & Misc.

Product Name

Barabrine : Defoamer

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF NONIONIC SURFACTANTS,FOR NON-DAMAGING FLUIDS RDF-615 AND NON-RESERVOIR WBM AND BRINES, INCLUDING ZNBR2,BLEND OF NONIONIC SURFACTANTS,PAIL (ONE PAIL = 5 GALLONS),APPEARANCE: COLORLESS CLEAR LI,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. THIS DEFOAMER IS USED AS PART OF THE NON-DAMAGING FLUIDS RDF-615, WHICH INCLUDES BARAZAN D PLUS, BARA CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBEGOLD SEAL (MM: 1000757580). TYPICAL TREATMENT IS 0.05-0.25 LB/BBL (0.007-0.033 GAL/BBL). THIS DEFOAMER CAN ALSO BE USED IN NON-RESERVOIR WATER BASED MUDS AND BRINES, INCLUDING ZNBR2. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000908535

Category

Chemicals & Misc.

Product Name

BaraCarb 150: weighting material, bridging material, LCM

Description

ADDITIVE DRILLING FLUID; POWDER OR GRANULES FORM,SIZED CALCIUM CARBONATE (CACO3) MARBLE QUALITY,FOR WATER BASED MUD (WBM), OIL BASED MUD (OBM) AND BRINE,CALCIUM CARBONATE (CACO3) MARBLE QUALITY.,BAG (ONE BAG = 55 LBS),APPEARANCE: WHITE POWDER OR GR,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. SIZED MARBLE CALCIUM CARBONATE (D50 = 150 MICRONS) USED TO INCREASE DENSITY IN WBM AND OBM FOR RESERVOIR APPLICATIONS AND BRINES AND AS A BRIDGING AGENT FOR FLUID LOSS CONTROL AND SEALING/LCM IN NON - DAMAGING SYSTEMS. THE UNIT IS 55 LBS (25 KG) / BAG. IT IS PART OF THE RDF -615 WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB5 (MM: 1000775558), BARACARB 25 (MM: 1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580). SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER SAUDI ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS. 

Material No.

1000908540

Category

Chemicals & Misc.

Product Name

Wellbore cleanup

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,ENZYME PROTEIN,FOR FILTER CAKE REMOVAL FOR WATER BASED MUD AND BRIDGING PARTICLES PRESENT IN THE CAKE, REMOVING THE NEAR-WELLBORE DAMAGE,ENZYME PROTEIN,DRUM (ONE DRUM = 55 GALLONS),APPEARANCE: LIGHT BROWN LIQUID,ADDITIVE FOR DRILLING FLUID. IT IS A FILTER CAKE REMOVAL FOR WATER BASED MUD WHICH BREAKS DOWN THE STARCH POLYMERS PRESENT IN THE MUD FILTER CAKE BREAKING ITS INTEGRITY AND ENABLE MORE EFFICIENT ACIDIZING TREATMENT OF ACID-SOLUBLE DRILL SOLIDS AND BRIDGING PARTICLES PRESENT IN THE CAKE, REMOVING THE NEAR-WELLBORE DAMAGE. TYPICAL TREATMENT IS 5 - 6% V/V. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). PACKAGING MUST BE AS PER ARAMCO STANDARDS. CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME, MANUFACTURERS NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF#PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000908544

Category

Chemicals & Misc.

Product Name

Low Toxicity Mineral Oil

Description

ADDITIVE DRILLING FLUID; CLEAR LIQUID FORM,CLEAN NATURAL GAS ORIGIN, FOR IT IS LOW TOXICITY MINERAL OIL USE AS BASE OIL FOR FORMULATING OIL-BASED DRILLING FLUID IT IS COMPATIBLE WITH ALL OIL BASED DRILLING FLUIDS ADDITIVES. IT IS COMPARABLE WITH LOW TOXICITY MINERAL OIL AND TS SPECIFICATION OF # 1000022138 AS STATED BELOW, A MIXTURE OF ALKANES. CLEAR AND ODORLESS PARAFFIN OIL, GALLON, TM D1319) TM D611) TM D93) LYSIS (COA) AND LINE POINT: MORE THAN 75 DE HORIZED ZENE CONTENT: NIL PPM ASSAY TEST): > 100,000 PPM. RY OUT CERTIFICATE OF ORIGIN (COO). SH POINT: MORE THAN 85 DEG 50 (MYSID SHRIMP 96-HR : 0.77-0.97 (ASTM D1298) FINS CONTENT: NIL PPM KAGING AS PER SAUDI ARAMCO YNUCLEAR AROMATIC: NIL PPM PLING AND TESTING AS NEEDED DI ARAMCO PERSONNEL WILL CIFIC GRAVITY AT 15 OC : PLIER/VENDOR IS REQUIRED SUBMIT LAB CERTIFICATE OF AL AROMATIC: LESS THAN 0.5, #CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN SHOULD BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000908546

Category

Chemicals & Misc.

Product Name

TAU MOD, Viscosifier/Suspension Agent

Description

ADDITIVE DRILLING FLUID;POWDER FORM,CYRISTALLINE SILICA & SEPIOLITE,FOR A HIGH TEMP VISCOSIFER, ONE OF THE COMPONENT OF CLAY FREE OIL-BASED DRILLING FLUID SYSTEMS OF HALLIBURTON # BAROID INNOVERT (LOW TOXICITY MINERAL OIL BASE)&INTEGRADE (DIESEL BASE).IT IMPROVES LOW SHEAR RHEOLOGY &HELPS TO EXTEND CO-POLYMERS LLING FLUIDS IN LONG TERM CLAY FREE OIL-BASED PENSION OF SOLIDS & GHTING AGENTS, CYRISTALLINE SILICA &SEPIOLITE,50 LB BAG,A) & CERTIFICATE OF HOURS DYNAMIC LB/BBL TAU MOD, 40 B/BBL FACTANT, 2LB/BBL LS @ 300PM READING T 120 DEGREE F. TANDARD LABORATORY IXTURE MINERAL OIL EARANCE: POWDER. PINK TO PER SAUDI ARAMCO STANDARDS TIFICATE OF ANALYSIS REE F &500PSI PRESSURE TRICAL STABILITY GREATER HOULD HAVE ATER THAN 23LB/100FT2, ATER THAN 9 & 3 RPM YISH TAN. T AGEING AT 380 DEGREE P FILTRATE LOSS LESS THAN ERT EMULSION MUD PREPARED BBL MARBLE FINE WITH E, 5.0LB/BBL BDF-513 FLUID S CONTROL, 3LB/BBL 80PCF WITH BARITE AFTER ORIGIN (COO)/WATER RATIO 70/30, KAGING FORMANCE PROPERTIES SICAL PROPERTIES: AND DENSITY DING GREATER THAN OMOD-L VISCOSIFER CIFIC GRAVITY: 1.9 # 2.4 BLE UP TO 400 DEGREES F. PLIER/VENDOR IS REQUIRED N 300 VOLTS, SUBMIT LAB ER PHASE SALINITY 250,000 H 15LB/BBL LE SUPERMUL LD POINT, PHYSICAL PROPERTIES: APPEARANCE: POWDER. PINK TO GREYISH TAN. SPECIFIC GRAVITY : 1.9 # 2.4 STABLE UP TO 400 DEGREES F.PERFORMANCE PROPERTIES A STANDARD LABORATORY ADMIXTURE MINERAL OIL INVERT EMULSION MUD PREPARED WITH 15 LB/BBL LE SUPERMUL, 4LB/BBL FACTANT, 2LB/BBL LIME, 5.0LB/BBL BDF-513 FLUID LOSS CONTROL, 3 LB/BBL RHEOMOD-L VISCOSIFER, 2.5 LB/BBL TAU MOD, 40 LB/BBL MARBLE FINE WITH OIL/WATER RATIO 70/30, WATER PHASE SALINITY 250,000 PPM AND DENSITY OF 80 PCF WITH BARITE AFTER 16 HOURS DYNAMIC HEAT AGEING AT 380 DEGREE F SHOULD HAVE ELECTRICAL STABILITY GREATER THAN 300 VOLTS, HTHP FILTRATE LOSS LESS THAN 5 MLS @ 300 DEGREE F AND 500 PSI PRESSURE, YIELD POINT GREATER THAN 23 LB/100FT2, 6RPM READING GREATER THAN 9 AND 3RPM READING GREATER THAN 8 AT 120 DEGREE F. 

Material No.

ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND

Category

Chemicals & Misc.

Product Name

PRIME-760, blend surfactants de-emulsifier & water wetting agent

Description

ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND SURFACTANTS,FOR USED TO CREATE AN EFFECTIVE PUSH PILL TO PILOT THE DISPLACEMENT AND ACT AS NON EMULSIFIER,2-BUTOXYETHANOL > 60% AND A BLEND OF UNSATURATED AROMATIC HYDROCARBONS, NON-IONIC SURFACTANT AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE CLEAR,`LIGHT YELLOW LIQUID, ODOR MILD, SWEET SPECIFIC GRAVITY:920 KG/M3 FLASH POINT 64¡C(PMCC),PH 4.7-5.7(75%IPA/25% WATER), SOLUBLE IN WATER, VISCOSITY: 95-105 CPS AT 20 DEG C ++ USED FOR REMOVING OIL-WET DEBRIS FROM THE METAL SURFACES, FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED DRILLING FLUIDS.ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED CONTAINER MUST BE PROPERLY LABELED ++ MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC ACID. PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

Material No.

1000813535

Category

Chemicals & Misc.

Product Name

CaCO3 FLAKES Coarse

Description

ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE 60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99% MIN ++

Material No.

1000813534

Category

Chemicals & Misc.

Product Name

CaCO3 FLAKES Fine

Description

ADMIXTURE DRILLING MUD; FINE WHITE FLAKES FORM,SIZED CALCIUM CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE 60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99% MIN, ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. 

Material No.

1000813690

Category

Chemicals & Misc.

Product Name

CaCO3 FLAKES Med.

Description

ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE 60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99% MIN ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. 

Material No.

1000775562

Category

Chemicals & Misc.

Product Name

Clay Sync: a Clay inhibitor

Description

ADMIXTURE DRILLING MUD; GRANULES FORM, NON-IONIC 100% ACTIVE DRYPOLYMER, FOR A CLAY INHIBITOR FOR WATER BASED DRILLING FLUIDS.SHALE STABILIZER AND WELLBORE LUBRICATOR,LOW MOLECULAR WEIGHT, NON-IONIC DRY POLYMER, 50 LB. BAG, POLYMER ADHERES TO SURFACE OFREACTIVE CLAYS PREVENTING DISPERSION AND HYDRATION, SHOULD BEMIXED THROUGH THE HOPPER IN THE HYDRO-GUARD SYSTEM. IF SALINITY >140,000 PPM USE 2 LB/BBL, IF SALINITY IS<140,000 PPM, USE 3LB/BBL OFF-WHITE GRANULES, SOLID, ODORLESS, PH (1% SOLUTION): 6.5-7.5 , SG 1.04, 100 (%ACTIVE POLYMER), BULK DENSITY 50 LB/FT3@ 20OC, SOLUBLE IN WATER

Material No.

1000813125

Category

Chemicals & Misc.

Product Name

COASTAL SPOT

Description

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF POLYALPHAOLEFIN ( PAO) SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS,FOR SPOTTING FLUID FOR FREEING STUCK PIPE,PAO BASED PRODUCT WITH PATENTED ADDITIVES,275 GALLON IBC CONTAINER,ADDITIVE, DRILLING FLUID: LIQUID, BLEND OF POLYALPHAOLEFIN (PAO) SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS, SPOTTING FLUID FOR FREEING STUCK PIPE, PAO BASED PRODUCT WITH PATENTED ADDITIVES, 275 GALLON IBC CONTAINER,CLEAR YELLOW LIQUID: SG:0.95-1. 05: DISPERSIBLE IN WATER: POUR POINT: -20 DEG F, FLASH POINT GREATER 300 DEG F: REPLACEMENT FOR DIESEL AND MINERAL OIL BASED SPOTTING FLUIDS: DEHYDRATES AND CRACKS FILTER CAKE TO ALLOW PENETRATION AROUND THE PIPE WITH PAO TO FREE STUCK PIPE ++ CONTAINER MUST BE PROPERLY LABELED WITH: VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCT

Material No.

1000720918

Category

Chemicals & Misc.

Product Name

Drilling Beads for lubrication

Description

ADMIXTURE: DRILLING MUD; DRY, LUBRA-GLIDE BEADS; DIVINYL BENZENE COPOLYMER; DRY, COARSE GRADE; FOR REDUCING TORQUE AND DRAG. ADMIXTURE DRILLING MUD; DRY, COARSE FORM,DIVINYL BENZENE COPOLYMER BEAD,FOR SOLID LUBRICANT, TO REDUCE TORQUE AND DRAG WHILE DRILLING,22.7 KG (50 LB) SACK,AF BATCH NO. AND STOCK NO.,TEMPERATURE RANGE, UP TO 450 DEGREE F.

Material No.

1000820609

Category

Chemicals & Misc.

Product Name

EC-101(CUTTING WASH)

Description

ADDITIVE DRILLING FLUID; AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC COMPOUNDS AND ENZYMES,FOR A NON-TOXIC ,NON- HAZARDOUS,NON-FLAMMABLE NON-CORROSIVE,100% BIODEGRADABLE,WATER BASED PRODUCT WHICH IS UTILIZED IN BUT NOT LIMITED TO THE FOLLOWING APPLICATION,DRILL CUTTING DECONTAMINATION, TREATMENT AND DISPOSAL, HYDROCARBON CONTAMINATED SOLIDS TREATMENT AND DE- OILING OPERATION ON ONSHORE AND OFFSHORE OIL DRILLING RIGS,PRODUCTION PLLATFORMS AND VESSELS , OIL SPILL CLEANUP OPERATION AND PROCESS PLANT CLEAN UP . THE PRODUCT LEAVES NO PETROCHEMICAL DISTILLATES AFTER PROPER TREATMENT,APPEARANCE: MEDIUM BLUE AQUEOUS SOLUTION, SPECIFIC GRAVITY: 1.2 - 1.4 (WATER=1), PH: 7 - 9 POUR POINT : 26 DEG F FREEZE POINT: 26 ¡F SOLUBILITY : FRESH AND BRINE WATER,55-GAL DRUM,++

Material No.

1000813531

Category

Chemicals & Misc.

Product Name

EC-103 (EMULSION BREAKER)

Description

ADDITIVE DRILLING FLUID; LIQUID AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC NOMINAL PIPE SIZE: 5-1/8 IN,FOR EMULSION BREAKER, BREAKS DOWN CRUDE FOR THE SEPARATION OF BOTH OIL AND SOLIDS,ORGANIC, BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:100 CST,FREEZE POINT: 26 DEG F, SOLUBLE IN FRESH AND BRINE WATER, APPLIED BY BATCH OR DOWN HOLE INJECTION METHODS , ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.

Material No.

1000758661

Category

Chemicals & Misc.

Product Name

Syn. Graphite to control/ bridge Seepage

Description

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDSTICULATES FORM, GRAPHITE, SYNTHETIC, FOR USE FOR SEEPAGE CONTROL BRIDGING, PLUGGING, OIL MUDS, WATER MUDS,LUBRICITY, SEALING OF DEPLETED ZONES, PREVENTION OF STUCKPIPE,50 LB (22.7 KG)/ SACK, PLY OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNELAND/OR ADVERSELY AFFECT FLUID PROPERTIES. APPEARANCE: GRAY TOBLACK POWDER ODOR: ODORLESS SP. GR.: 2.25 GM/CC FREEZING POINT:NA MELTING POINT: >5000 F DEG SOLUBILITY: INSOLUBLE IN WATER &ACID PARTICLE SIZE: D90 300 D50 165 D10 75 CONTAINER IS AMULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER (INTERIORPLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LBMIN. NATURAL KRAFT PAPER (EXTERIOR PLY). 

Material No.

1000758660

Category

Chemicals & Misc.

Product Name

Synthetic Graphite to control/ bridge Seepage

Description

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDSTICULATES FORM, SYNTHETIC, FOR USE FOR SEEPAGE CONTROL BRIDGING, PLUGGING, OIL MUDS, WATER MUDS, LUBRICITY,SEALING OF DEPLETED ZONES, PREVENTION OF STUCKPIPE,SYNTHETICGRAPHITE, 50 LB (22.7 KG)/ SACK, PLY OTHER ASSOCIATED ELEMENTSMUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUIDPROPERTIES. APPEARANCE: GRAY TO BLACK POWDER ODOR: ODORLESS SP.GR.: 2.25 GM/CC FREEZING POINT: NA MELTING POINT: >5000 F DEGSOLUBILITY: INSOLUBLE IN WATER & ACID PARTICLE SIZE: D90 480 D50325 D10 180 CONTAINER IS A MULTI-WALLED SACK - 75 LB MIN.NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURALKRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIORPLY).

Material No.

1000774613

Category

Chemicals & Misc.

Product Name

Premium Lubricant for WBM

Description

LUBRICANT; DRILLING MUD, ADDITIVE TYPE, AMBER LIQUID FORM, 55 GAL/DRUM, LUBRICANT FOR SALT WATER BASED MUD AND BRINES, DISPERSED, SEA WATER, SALT SATURATED, FORMATS, COMPLETION, WORKOVER FLUIDS. USED WITH BRINES, ALSO, RECOMMENDED FOR DRILL-IN FLUIDS CONTAINING HIGH AMOUNT OF SIZEABLE CALCIUM CARBONATE, SODIUM CHLORIDE OR CALCIUM CHLORIDE. PHYSICAL STATE @ 20 C DEG: AMBER COLOR, FAINT ODOR, POUR POINT IS -10 C DEG MAX, SP. GR. 1.002 G/CC, VISCOSITY @ 40 C DEG IS 120 MM2/S, FLASH POINT 230 C DEG, INSOLUBLE IN WATER, DOES NOT FORM GREASING AND IT DOES NOT PHASE OUT. BOTTOM HOLE TEMP. LIMIT: 160 C DEG (320 F), PH LIMIT MAX 10.5, REDIAGREEN EME SALT IS A MIXTURE OF FATTY ACID, C1618 AND C18-UNSATURATED COMPOUNDS WITH 2, 2, 2-NITRILOTRI-ETHANOL AND FATTY ACIDS, ESTERS WITH POLYOL. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECTED FLUID PROPERTIES.

Material No.

1000775556

Category

Chemicals & Misc.

Product Name

Steel Seal Fine: Graphite as LCM additive

Description

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSSCIRCULATION ADDITIVE TO STOP LOSSES IN POROUS ANDMICRO-FRACTURED FORMATIONS,GRAY-BLACK ANGULAR MATERIAL CARBONBASED MATERIAL,50 LB SACK,FOR USE WITH SYNTHETIC AND WATER-BASEDDRILLING FLUIDS IMPARTS LUBRICITY FOR WATER BASED FLUIDS TOCONTROL SEEPAGE AND LOST CIRCULATION 15-25 LB/BBL USED AS ABACKGROUND CONCENTRATION, 60-110 LB/BBL LCM PILL FOR SPOTTINGOVER THIEF ZONES, 4-10 LB/BBL FOR LUBRICITY IN WATER BASEDFLUIDS. ODORLESS, SG 1.75,FLASH POINT >356OC,INSOLUBLE IN WATER,PARTICLES SIZE DRY SIEVE ANALYSIS:FINE 99% MIN & REGULAR 95%MIN. THROUGH (30 MESH) DRY SIEVE ANALYSIS:FINE 40% MIN & REGULAR2% MAX THROUGH (200 MESH) MEDIAN PARTICLE SIZE: 80 CONTAINERMUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'SNAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER. THECONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BEAS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIORPLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LBMIN. NATURAL KRAFT PAPER (EXTERIOR PLY) SAUDI ARAMCO'S PERSONNELWILL CARRY OUT SAMPLING AND TESTING AS NEEDED.

Material No.

1000775555

Category

Chemicals & Misc.

Product Name

Steel Seal: Graphite as LCM additive

Description

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSSCIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND FRACTUREDFORMATIONS,BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LBBAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDSIMPARTS LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE ANDLOST CIRCULATION 15-25 LB/BBL USED AS A BACKGROUNDCONCENTRATION, 50-100 LB/BBL LCM PILL FOR SPOTTING OVER THIEFZONES, 3-10 LB/BBL FOR LUBRICITY IN WATER BASED FLUIDS.ODORLESS, SG 1.75, FLASH POINT >356OC,INSOLUBLE IN WATER,PARTICLES SIZE PERCENT < 40 MESH: 100 PERCENT > 200 MESH: 95CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALLBE AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER(INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RDPLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) SAUDIARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING ASNEEDED.

Material No.

1000813126

Category

Chemicals & Misc.

Product Name

SX-PLUS

Description

"ADDITIVE DRILLING FLUID; BLACK SOLID POWDER PARTICULATES OF SPECIFIC SIZED GRINDS FORM,HEAT TREATED CARBON BASED MATERIAL,FOR USED FOR SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY, SEALING OF DEPLETED ZONES, PREVENTION OF STUCK PIPES,GRAPHITE PARTICLES 40 MESH TO GRATER THAN 200 MESH ( 425 TO > 75 MICRONS),ADDITIVE, DRILLING FLUID: BLACK SOLID POWDER PARTICULATES OF SPECIFIC SIZED GRINDS, HEAT TREATED CARBON BASED MATERIAL, USED FOR SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY, SEALING OF DEPLETED ZONES PREVENTION OF STUCK PIPES, GRAPH GREY TO BLACK POWDER SG 1.5 FLASH POINT > 350 DEG (F): MELTING POINT > 500 DEG (F): PARTICLE SIZE:D90-245, D50-160, D10-111 NEGLIGIBLE SOLUBILITY IN WATER AND OIL: USED FOR SEALING POROUS SANDS AND OTHER FORMATION TO REDUCE DIFFERENTIAL PRESSURE TRANSFER"

Material No.

1000813532

Category

Chemicals & Misc.

Product Name

VISCOSITY REDUCER

Description

ADDITIVE DRILLING FLUID; LIQUID, AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC COMPOUNDS AND ENZYMES,FOR VISCOSITY REDUCING AGENT, RETURNS HEAVY HYDROCARBONS TO AN OIL PHASE,ORGANIC, BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:200 CST,FREEZE POINT: 27 DEG F, SOLUBLE IN FRESH & BRINE WATER AND OIL SOLUBLE, APPLIED BY BATCH OR DOWN HOLE INJECTION METHODS, ++DESIGNED FOR THE TREATMENT OF DIFFICULT PARAFFIN AND ASPHALTENE PROBLEMS BREAK DOWN THE LONG CHAIN AND CYCLIC PARAFFIN'S (ALONG WITH OTHER LONG CHAIN HYDROCARBONS SUCH AS ASPHALTENES) ALLOWING THEM TO RETURN TO THE OIL PHASE PERMANENTLY. ++

Material No.

1000758663

Category

Chemicals & Misc.

Product Name

Retarder: cross-linking of Polymer

Description

ADMIXTURE DRILLING MUD; MILKY, WHITE LIQUID FORM, MAX-SHIELD LATEX, 60 WT%, FOR SEALING POLYMER IN WATER-BASED DRILLING FLUID SYSTEM, LATEX, 60 WT%, 55 GAL/DRUM, USED TO CREATE A SEMI-PERMEABLE MEMBRANE AT BOREHOLE, IMPROVE HOLE STABILITY AND REDUCE PORE PRESSURE TRANSMISSION WHICH HELPS PREVENT STUCK PIPE WHEN DRILLING DEPLETED ZONES. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. NORMAL TREATMENT: 2-5 % BY VOLUME. APPEARANCE: MILKY, WHITELIQUID. ODOR: MILD PH: 6-9 SP. GR.: 1.05 GM/CC FREEZING POINT: 32 F DEG (0 C DEG) BOILING POINT: 212 F DEG (100 C DEG) FLASHPOINT: NA RELATIVE DENSITY: 1025 KG/M3 @ 16 C DEG. SOLUBILITY: MISCIBLE WITH WATER VOC WEIGHT: <0.6%